Communications-based train control

Communications-based train control
Source: Bombardier Transportation for Wikimedia Commons. Author: Antonio Munoz
CBTC deployment in Metro de Madrid, Spain
Source: Bombardier Transportation for Wikimedia Commons. Author: Supinas Sumrianrum
CBTC train in Shenzhen Metro Line 3, China
World´s busiest metros are choosing radio-based CBTC systems to improve the operation (in the case of these images, two lines equipped with the Bombardier´s CBTC solution CITYFLO 650])

Communications-Based Train Control (CBTC) is a railway signalling system that makes use of the telecommunications between the train and track equipment for the traffic management and infrastructure control. By means of the CBTC systems, the exact position of a train is known more accurately than with the traditional signalling systems. This results in a more efficient and safe way to manage the railway traffic. Metros (and other railway systems) are able to improve headways while maintaining or even improving also the safety.

A CBTC system is a “continuous, automatic train control system utilizing high-resolution train location determination, independent of track circuits; continuous, high-capacity, bidirectional train-to-wayside data communications; and trainborne and wayside processors capable of implementing Automatic Train Protection (ATP) functions, as well as optional Automatic Train Operation (ATO) and Automatic Train Supervision (ATS) functions.”, as defined in the IEEE 1474 standard.[1]

Contents

Background and origin

City and population growth increases the need for mass transit transport and signalling systems need to evolve and adapt to safely meet this increase in demand and traffic capacity. As a result of this operators are now focused on maximising train line capacity. The main objective of CBTC is to increase capacity by safely reducing the time interval (headway) between trains travelling along the line.

Traditional legacy signalling systems are historically based in the detection of the trains in discrete sections of the track called ‘blocks’. Each block is protected by signals that prevent a train entering an occupied block. Since every block is fixed by the infrastructure, these systems are referred to as fixed block systems.

Unlike the traditional fixed block systems, in the modern moving block CBTC systems the protected section for each train is not statically defined by the infrastructure (except for the virtual block technology, with operating appearance of a moving block but still constrained by physical blocks). Besides, the trains themselves are continuously communicating their exact position to the equipment in the track by means of a bi-directional link, either inductive loop as is used by Dubai Metro, or radio communication.

The advent of digital radio communication technology during the early 90s, encouraged the signalling industry on both sides of the Atlantic to explore using radio communication as a viable means of track to train communication, mainly due to its increased capacity and reduced costs compared to the existing transmission loop-based systems, and this is how CBTC systems started to evolve.[2]

 Picture from Jef Poskanzer, available in Wikimedia Commons
SFO AirTrain, in San Francisco Airport, was the first radio-based CBTC system deployment in the world

As a result, Bombardier opened the world’s first radio-based CBTC system at San Francisco airport´s Automated People Mover (APM) in February 2003. A few months later, in June 2003, Alstom introduced the railway application of its radio technology on the Singapore North East Line. Previously, CBTC has its former origins in the loop based systems developed by Alcatel SEL (now Thales) for the Bombardier Automated Rapid Transit (ART) systems in Canada during the mid 1980s. These systems, which were also referred to as Transmission-Based Train Control (TBTC), made use of inductive loop transmission techniques for track to train communication, introducing an alternative to track circuit based communication. This technology, operating in the 30-60 KHz frequency range to communicate trains and wayside equipment, was widely adopted by the metro operators in spite of some electromagnetic compatibility (EMC) issues, as well as other installation and maintenance concerns.

As every new application of any technology, some problems arose at the beginning mainly due to compatibility and interoperability aspects.[3][4] However, there have been relevant improvements since then, and currently the reliability of the radio-based communication systems has grown significantly.

Moreover, it is important to highlight that not all the systems using radio communication technology are considered to be CBTC systems. So, for clarity and to keep in line with the state-of-the-art solutions for operator´s requirements,[4] this article only covers the latest moving block principle based (either true moving block or virtual block, so not dependent on track-based detection of the trains)[1] CBTC solutions that make use of the radio communications.

Main features

CBTC and moving block

CBTC systems are modern railway signalling systems that can mainly be used in urban railway lines (either light or heavy) and APMs, although it could also be deployed on commuter lines. For main lines, a similar system might be the European Railway Traffic Management System ERTMS Level 3 (not yet fully defined). In the modern CBTC systems the trains continuously calculate and communicate their status via radio to the wayside equipment distributed along the line. This status includes, among others parameters, the exact position, speed, travel direction and braking distance. This information allows calculation of the area potentially occupied by the train on the track. It also enables the wayside equipment to define the points on the line that must never be passed by the other trains on the same track. These points are communicated to make the trains automatically and continuously adjust their speed while maintaining the safety and comfort (jerk) requirements. So, the trains continuously receive information regarding the distance to the preceding train and are then able to adjust their safety distance accordingly.

Source: Bombardier Transportation for Wikimedia Commons
Safety distance between trains in fixed block and moving block signalling systems

From the signalling system perspective, the first figure shows the total occupancy of the leading train by including the whole blocks which the train is located on. This is due to the fact that it is impossible for the system to know exactly where the train actually is within these blocks. Therefore, the fixed block system will only allow the following train to move up to the last unoccupied block's border.

On the other hand, in a moving block system as shown in the second figure, the train position and its braking curve is continuously calculated by the trains, and then communicated via radio to the wayside equipment. Thus, the wayside equipment is able to establish protected areas, each one called Limit of Movement Authority (LMA), up to the nearest obstacle (in the figure the tail of the train in front).

It is important to mention that the occupancy calculated in these systems must include a safety margin for location uncertainty (in yellow in the figure) added to the length of the train. Both of them form what is usually called ‘Footprint’. This safety margin depends on the accuracy of the odometry system in the train.

Therefore, the CBTC systems based on moving block allows to reduce the safety distance between two consecutive trains. This distance is varying according to the continuous updates of the train location and speed, maintaining the safety requirements. This results in a reduced headway between consecutive trains and an increased transport capacity.

Levels of automation

Modern CBTC systems allow different levels of automation or Grades of Automation, GoA, as defined and classified in the IEC 62290-1.[5] In fact, CBTC is not a synonym for “driverless” or “automated trains” although it is considered as a basic technology for this purpose.

The grades of automation available range from a manual protected operation, GoA 1 (usually applied as a fallback operation mode) to the fully automated operation, GoA 4 (Unattended Train Operation, UTO). Intermediate operation modes comprise semi-automated GoA 2 (Semi-automated Operation Mode, STO) or driverless GoA 3 (Driverless Train Operation, DTO).[6] The latter operates without a driver in the cabin, but requires an attendant to face degraded modes of operation as well as guide the passengers in the case of emergencies. The higher the GoA, the higher the safety, functionality and performance levels must be.[6]

Main applications

Source: Wikimedia Commons & Flickr. Author: Dfwcre8tive
Dallas-Fort Worth Airport driverless APM vehicle equipped with radio-based CBTC true moving block system

CBTC systems allow optimal use of the railway infrastructure as well as achieving maximum capacity and minimum headway between operating trains, while maintaining the safety requirements. These systems are suitable for the new highly demanding urban lines, but also to be overlaid on existing lines in order to improve their performance.[7]

Of course, in the case of upgrading existing lines the design, installation, test and commissioning stages are much more critical. This is mainly due to the challenge of deploying the overlying system without disrupting the revenue service.[8]

Main benefits

The evolution of the technology and the experience gained in operation over the last 30 years means that modern CBTC systems are more reliable and less prone to failure than older train control systems. CBTC systems normally have less wayside equipment and their diagnostic and monitoring tools have been improved, which makes them easier to implement and, more importantly, easier to maintain.[6]

CBTC technology is evolving, making use of the latest techniques and components to offer more compact systems and simpler architectures. For instance, with the advent of modern electronics it has been possible to build in redundancy so that single failures do not adversely impact operational availability.

Moreover, these systems offer complete flexibility in terms of operational schedules or timetables, enabling urban rail operators to respond to the specific traffic demand more swiftly and efficiently and to solve traffic congestion problems. In fact, automatic operation systems have the potential to significantly reduce the headway and improve the traffic capacity compared to manual driving systems.[9][10]

Finally, it is important to mention that the CBTC systems have proven to be more energy efficient than traditional manually-driven systems.[6] The use of new functionalities, such as automatic driving strategies or a better adaptation of the transport offer to the actual demand, allows significant energy savings reducing the power consumption.

Architecture

Source and author: Bombardier Transportation for Wikimedia Commons
Illustration of a typical radio-based CBTC architecture. Technical solution may differ from one supplier to another.

The typical architecture of a modern CBTC system comprises the following main subsystems:

Source and author: Bombardier Transportation for Wikimedia Commons
Wayside ATC equipment cabinets in a CBTC system
  1. Wayside equipment, which includes the interlocking and the subsystems controlling every zone in the line or network (typically containing the wayside ATP and ATO functionalities). Depending on the suppliers, the architectures may be centralized of distributed. The control of the system is performed from a central command ATS, though local control subsystems may be also included as a fallback.
  2. CBTC onboard equipment, including ATP and ATO subsystems in the vehicles.
  3. Train to wayside communication subsystem, currently based on radio links.

Thus, although a CBTC architecture is always depending on the supplier and its technical approach, the following logical components may be found generally in a typical CBTC architecture:

  • Onboard ATP system. This subsystem is in charge of the continuous control of the train speed according to the safety profile, and applying the brake if it is necessary. It is also in charge of the communication with the wayside ATP subsystem in order to exchange the information needed for a safe operation (sending speed and braking distance, and receiving the limit of movement authority for a safe operation).
  • Onboard ATO system. It is responsible for the automatic control of the traction and braking effort in order to keep the train under the threshold established by the ATP subsystem. Its main task is either to facilitate the driver or attendant functions, or even to operate the train in a fully automatic mode while maintaining the traffic regulation targets and passenger comfort. It also allows the selection of different automatic driving strategies to adapt the runtime or even reduce the power consumption.
  • Wayside ATP system. This subsystem undertakes the management of all the communications with the trains in its area. Additionally, it calculates the limits of movement authority that every train must respect while operating in the mentioned area. This task is therefore critical for the operation safety.
  • Wayside ATO system. It is in charge of controlling the destination and regulation targets of every train. The wayside ATO functionality provides all the trains in the system with their destination as well as with other data such as the dwell time in the stations. Additionally, it may also perform auxiliary and non-safety related tasks including for instance alarm/event communication and management, or handling skip/hold station commands.
Source: Bombardier Transportation for Wikimedia Commons
ATS control center (illustration)
  • Communication system.The CBTC systems integrate a digital networked radio system by means of antennas or leaky feeder cable for the bi-directional communication between the track equipment and the trains. The 2,4GHz band is commonly used in these systems (same as WiFi), though other alternative frequencies such as 900MHz (US), 5,8GHz or other licensed bands may be used as well.
  • ATS system. The ATS system is commonly integrated within most of the CBTC solutions. Its main task is to act as the interface between the operator and the system, managing the traffic according to the specific regulation criteria. Other tasks may include the event and alarm management as well as acting as the interface with external systems.
  • Interlocking system. When needed as an independent subsystem (for instance as a fallback system), it will be in charge of the vital control of the trackside objects such as switches or signals, as well as other related functionality. In the case of simpler networks or lines, the functionality of the interlocking may be integrated into the wayside ATP system.

Main suppliers

Nowadays, main radio-based CBTC suppliers are, in alphabetical order:

Projects

CBTC technology has been (and is being) successfully implemented for a variety of applications as shown in the figure below (mid 2011). They range from some implementations with short track, limited numbers of vehicles and few operating modes (such as the airport APMs in San Francisco or Washington), to complex overlays on existing railway networks carrying more than a million passengers each day and with more than 100 trains (such as lines 1 and 6 in Metro de Madrid, line 3 in Shenzhen Metro, some lines in Paris Metro and Beijing Metro, or the Sub-Surface network SSR in London Underground]).[11]

 The authors really appreciate news regarding upcoming commissioning and new projects to update/correct the map.
Radio-based CBTC moving block projects around the world. Projects are classified with colours depending on the supplier; those underlined are already into CBTC operation[note 1]


Despite the difficulty, the table below tries to summarize and reference the main radio-based CBTC systems deployed around the world as well as those ongoing projects being developed. Besides, the table distinguishes between the implementations performed over existing and operative systems (brownfield) and those undertaken on completely new lines (Greenfield).

We must take into account that the transmission technology based on inductive loops (referred to as TBTC in this article) is now being less and less used. That is why, for clarity, all the projects listed here are modern radio-based CBTC systems making use of the moving block concept as described above.

CBTC project list around the world (radio-based and moving block principle)[note 2][note 3]
Location Line/System Supplier Solution Commissioning Km No. of trains Comments
San Francisco Airport AirTrain APM
BOMBARDIER
CITYFLO 650
2003
5
38
Greenfield, UTO
Singapore Metro North-East Line
ALSTOM
Urbalis
2003
20
25
UTO
Seattle-Tacoma Airport Satellite Transit System APM
BOMBARDIER
CITYFLO 650
2003
3
22
Brownfield, UTO
Las Vegas Monorail
THALES
SelTrac RF
2004
6
36
Greenfield, UTO
Wuhan_Metro 1
THALES
SelTrac
2004
27
32
Dallas-Fortworth Airport DFW Skylink APM
BOMBARDIER
CITYFLO 650
2005
10
64
Greenfield, UTO
Hong Kong Disneyland Penny´s Bay Line
THALES
SelTrac RF
2005
3
2
Greenfield, UTO
Lausanne Metro M2
ALSTOM
Urbalis
2008
6
?
UTO
Beijing Airport Express
ALSTOM
Urbalis
2008
28
10
Greenfield, UTO
Beijing Metro 2
ALSTOM
Urbalis
2008
23
48
Metro de Madrid 1, 6
BOMBARDIER
CITYFLO 650
2008
48
124
Brownfield, STO
Las Vegas-McCarran Airport McCarran Airport APM
BOMBARDIER
CITYFLO 650
2008
2
6
Brownfield, UTO
London Heathrow Airport Heathrow APM
BOMBARDIER
CITYFLO 650
2008
1
9
Greenfield, UTO
Metro de Barcelona 9
SIEMENS
Trainguard MT CBTC
2009
46
50
Greenfield, UTO
New York City Transit Canarsie Line
SIEMENS
Trainguard MT CBTC
2009
17
53
Brownfield, STO
Washington-Dulles Airport Dulles APM
THALES
SelTrac RF
2009
8
29
Greenfield, UTO
Shanghai Metro 6, 7, 8, 9
THALES
SelTrac
2009
135
111
Greenfield and Brownfield
Taipei Metro Neihu-Mucha
BOMBARDIER
CITYFLO 650
2010
24
152
Greenfield and Brownfield, UTO
Philadelphia SEPTA Light Rail Green Line
BOMBARDIER
CITYFLO 650
2010
8
115
STO
Beijing Metro 4
THALES
SelTrac
2010
28
33
DTO
Guangzhou Metro Pearl River Line APM
BOMBARDIER
CITYFLO 650
2010
4
14
Greenfield, DTO
Guangzhou Metro 3
THALES
SelTrac RF
2010
67
40
DTO
London Gatwick Airport Terminal Transfer APM
BOMBARDIER
CITYFLO 650
2010
1
6
Brownfield, UTO
Paris Metro 3, 5
ANSALDO STS / SIEMENS
Inside RATP´s
Ouragan project
2010
,
2013
26
40
Brownfield, STO
Yongin EverLine ART
BOMBARDIER
CITYFLO 650
2011
19
30
UTO
Shenzhen Metro 3
BOMBARDIER
CITYFLO 650
2011
41
50
STO
Tianjin Metro 2, 3
BOMBARDIER
CITYFLO 650
2011
52
50
STO
Metro de Madrid 7 Extension MetroEste
INVENSYS
SIRIUS
2011
9
?
Brownfield, STO
Dubai Metro Red, Green
THALES
SelTrac
2011
70
85
Greenfield, UTO
Seoul Metro Bundang Line
THALES
SelTrac
2011
17
12
Greenfield, DTO
Shenyang Metro 1
ANSALDO STS
CBTC
2011
27
23
Greenfield, STO
Sacramento International Airport Sacramento APM
BOMBARDIER
CITYFLO 650
2011
0,5
2
Greenfield, UTO
Paris Metro 1
SIEMENS
Trainguard MT CBTC
2011
16
53
Brownfield, DTO
Singapore Metro Circle
ALSTOM
Urbalis
2012
35
40
Greenfield, UTO
Metro Santiago 1
ALSTOM
Urbalis
2012
20
42
Greenfield and Brownfield, STO
Sao Paulo Metro 1, 2, 3
ALSTOM
Urbalis
2012
57
?
Brownfield, DTO
Algiers Metro 1
SIEMENS
Trainguard MT CBTC
2012
9
14
Greenfield, STO
Phoenix Sky Harbor Airport PHX Sky Train
BOMBARDIER
CITYFLO 650
2012
4
9
Greenfield, UTO
Riyadh KAFD Monorail
BOMBARDIER
CITYFLO 650
2012
4
12
Greenfield, UTO
Shanghai Metro 11
THALES
SelTrac RF
2012
50
58
Brownfield and Greenfield
Sao Paulo Commuter Lines 8, 10, 11
INVENSYS
SIRIUS
2012
107
136
Brownfield, STO
Helsinki Metro 1
SIEMENS
Trainguard MT CBTC
2013
35
?
Greenfield and Brownfield, DTO
Paris Metro 13
THALES
SelTrac RF
2013
23
?
STO
Beijing Metro 8, 10
SIEMENS
Trainguard MT CBTC
2013
49
82
STO
Nanjing Metro 2, 10
SIEMENS
Trainguard MT CBTC
2013
38
35
Greenfield
São Paulo Metro Tiradentes Monorail Extension Line 2
BOMBARDIER
CITYFLO 650
2014
24
54
Greenfield, UTO
Stockholm Metro Red
ANSALDO STS
CBTC
2014
41
30
Brownfield, STO
Jeddah Airport King Abdulaziz APM
BOMBARDIER
CITYFLO 650
2014
2
10
Greenfield, UTO
Incheon Metro 2
THALES
SelTrac RF
2014
29
37
UTO
Munich Airport Munich Airport T2 APM
BOMBARDIER
CITYFLO 650
2014
0,7
12
Greenfield, UTO
São Paulo Metro 5
BOMBARDIER
CITYFLO 650
2015
20
34
Brownfield & Greenfield, UTO
Taipei Metro Circular
ANSALDO STS
CBTC
2015
15
17
Greenfield, UTO
Singapore Metro Downtown
INVENSYS
SIRIUS
2016
40
73
Greenfield, UTO
Taichung Metro Green
ALSTOM
Urbalis
2017
17
36
Greenfield, UTO
New York City Transit Flushing Line
THALES
SelTrac RF
2017
25
46
Brownfield, STO
London Underground SSR Lines: Metropolitan, District, Circle, Hammersmith&City
BOMBARDIER
CITYFLO 650
2018
310
240
Brownfield, STO
Rennes ART B
SIEMENS
Trainguard MT CBTC
2018
12
19
Greenfield, UTO
Copenhagen Metro S-Bane
SIEMENS
Trainguard MT CBTC
2018
170
135
Brownfield, STO
Budapest Metro M2, M4
SIEMENS
Trainguard MT CBTC
?
17
41
Guangzhou Metro 4, 5
SIEMENS
Trainguard MT CBTC
?
70
?
São Paulo Metro 4
SIEMENS
Trainguard MT CBTC
?
13
14
Greenfield, UTO
Marmaray Lines Commuter Lines
INVENSYS
SIRIUS
?
77
?
Greenfield, STO

Notes and references

Notes

  1. ^ Only radio-based projects using the moving block principle are shown. Collaboration to update/maintain the map is highly appreciated by the authors, as well as corrections if necessary. Please contact by means of Wikipedia Discussion. The information included here comes from several sources and has been regularly contrasted by means of several media including Wikipedia, insider forums, independent webs and supplier´s corporate sites, so that the authors are not responsible for some errors/mistakes in it and encourage the rest of the editors to collaborate with corrections if these are reliable.
  2. ^ Only radio-based projects using the moving block principle are shown. Collaboration to update the table is highly appreciated by the authors, as well as corrections if necessary. The information included here comes from several sources and has been regularly contrasted by means of several media including Wikipedia, insider forums, independent webs and supplier´s corporate sites, so that the authors are not responsible for some errors/mistakes in it and encourage the rest of the editors to collaborate with corrections if these are reliable.
  3. ^ Some of the references come from Mr. Dominique Joubert and other CBTC Meeting Point group members in LinkedIn. Thanks a lot to them, and further collaboration is appreciated.

References

  1. ^ a b IEEE Standard for CBTC Performance and Functional Requirements (1474.1-1999).[1] IEEE Rail Transit Vehicle Interface Standards Committee of the IEEE Vehicular Technology Society, 1999. Accessed January 2011.
  2. ^ Digital radio shows great potential for Rail[2] Bruno Gillaumin, International Railway Journal, May 2001. Retrieved by findarticles.com in June 2011.
  3. ^ CBTC Projects. [3] www.tsd.org/cbtc/projects, 2005. Accessed June 2011.
  4. ^ a b CBTC radios: What to do? Which way to go? [4] Tom Sullivan, 2005. www.tsd.org. Accessed May 2011.
  5. ^ IEC 62290-1, Railway applications - Urban guided transport management and command/control systems - Part 1: System principles and fundamental concepts.[5] IEC, 2006. Accessed June 2011
  6. ^ a b c d Semi-automatic, driverless, and unattended operation of trains .[6] IRSE-ITC, 2010. Accessed through www.irse-itc.net in June 2011
  7. ^ CITYFLO 650 Metro de Madrid, Solving the capacity challenge.[7] Bombardier Transportation Rail Control Solutions, 2010. Accessed June 2011
  8. ^ Madrid´s silent revolution.[8] in International Railway Journal, Keith Barrow, 2010. Accessed through goliath.ecnext.com in June 2011
  9. ^ CBTC: más trenes en hora punta.[9] Comunidad de Madrid, www.madrig.org, 2010. Accessed June 2011
  10. ^ How CBTC can Increase capacity - communications-based train control. [10] William J. Moore, Railway Age, 2001. Accessed through findarticles.com in June 2011
  11. ^ Bombardier to Deliver Major London Underground Signalling.[11] Press release, Bombardier Transportation Media Center, 2011. Accessed June 2011

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Communication-Based Train Control — Übersicht CBTC Communication Based Train Control (CBTC) ist ein Kategorie automatischer Zugsteuerungs und Zugsicherungssysteme, bei denen Fahrerlaubnis und Steuerungsbefehle nicht durch Signale angezeigt werden, sondern über Datenkommunikation… …   Deutsch Wikipedia

  • Positive train control — (PTC) is a system of monitoring and controlling train movements to provide increased safety.OverviewThe main concept in PTC is that the train receives information about its location and where it is allowed to safely travel. Equipment on board the …   Wikipedia

  • Automatic Train Control — Japanese style ATC indicator. Automatic Train Control (ATC) is a train protection system for railways, ensuring the safe and smooth operation of trains on ATC enabled lines. Its main advantages include making possible the use of cab signalling… …   Wikipedia

  • Chinese Train Control System — The Chinese Train Control System (CTCS) is a train control system used on railway lines in People s Republic of China. CTCS is similar to the European Train Control System (ETCS).[1] It has two subsystems: ground subsystem and onboard subsystem.… …   Wikipedia

  • Communications School (United States Marine Corps) — Communications School Official Communications School Emblem Designed by Captain Jamel Neville, USMC (2006) Active 1 June 1944 Present …   Wikipedia

  • Communications media in Romania — Part of a series on the Culture of Romania Topics …   Wikipedia

  • Traffic Control — ➡ law enforcement * * * Introduction       supervision of the movement of people, goods, or vehicles to ensure efficiency and safety.       Traffic is the movement of people and goods from one location to another. The movement typically occurs… …   Universalium

  • Centralized traffic control — (CTC) is a signalling system used by railroads. The system consists of a centralized train dispatcher s office that controls railroad switches in the CTC territory and the signals that railroad engineers must obey in order to keep the traffic… …   Wikipedia

  • 2008 Chatsworth train collision — This article is about the 2008 Metrolink train collision in Los Angeles. For the 1887 train collision at Great Chatsworth, Illinois, see 1887 Great Chatsworth train wreck. Chatsworth train collision Resc …   Wikipedia

  • Cab signalling — is a railroad safety system that communicates track status information to the train cab (driving position), where the engineer or driver can see the information. The simplest systems display the trackside signal aspect (typically, green, yellow… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”