Drill Stem Test

Drill Stem Test

A drill stem test (DST) is a procedure for isolating and testing the surrounding geological formation through the drill stem. The test is a measurement of pressure behavior at the drill stem and is a valuable way to obtain important sampling information on the formation fluid and to establish the probability of commercial production.

In oil and natural gas extraction, the drill stem includes the drill pipe, drill collars, bottomhole assembly, and drill bit. During normal drilling, fluid is pumped through the drill stem and out the drill bit. In a drill stem test, the drill bit is removed, a drill stem test tool is added, and fluid from the formation is recovered through the drill stem, while several measurements of pressure are being made.[1]

The basic drill stem test tool consists of a packer or packers, valves or ports that may be opened and closed from the surface, and two or more pressure-recording devices. (A packer is an expanding plug which can be used to seal off sections of the open or cased well, to isolate them for testing.[2]) The drill stem test tool is lowered on the drill pipe to the zone to be tested. The packer or packers are set to isolate the zone from the drilling fluid column, the tester valve is opened, and testing begins.

History

Working in El Dorado, Arkansas, in the 1920s, E.C. Johnston and his brother M.O. Johnston developed the first drill stem tester and ran the first commercial drill stem test in 1926. In April 1929, the Johnston Formation Testing Corporation was granted a patent (U.S. Patent 1,709,940) and they subsequently refined the testing system in the early 1930s.[3]

In the 1950s, Schlumberger introduced a method for testing formations using wireline. The Schlumberger formation-testing tool, placed in operation in 1953, fired a shaped charge through a rubber pad that had been expanded in the hole until it was securely fixed in the hole at the depth required. Formation fluids flowed through the perforation and connecting tubing into a container housed inside the tool. When filled, the container was closed, sealing the fluid sample at the formation pressure. The tool was then brought to the surface, where the sample could be examined. In 1956, Schlumberger acquired Johnston Testers and continues to perform drill stem tests and wireline formation tests in both open and cased holes.


See also

External links

Notes

  1. ^ Society of Petrophysicists & Well Log Analysts glossary, accessed on 12 September 2006 at http://www.spwla.org/library_info/glossary/reference/glossd/glossd.htm
  2. ^ Society of Petrophysicists & Well Log Analysts glossary, accessed on 12 September 2006 at http://www.spwla.org/library_info/glossary/reference/glossp/glossp.htm
  3. ^ History of Petroleum Engineering, API Division of Production, New York City, 1961, pages 561-566



Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • drill-stem test — noun : a test for determining productivity of an oil or gas well by means of sampling the flow while the drill stem is still in the bore …   Useful english dictionary

  • drill stem test — noun a test of the productive capacity of an oil or gas well when still full of drilling mud …  

  • Drill, baby, drill — Drill, baby, drill! was a 2008 Republican campaign slogan first used at the 2008 Republican National Convention[1] by former Maryland Lieutenant Governor Michael Steele, who was later elected Chairman of the Republican National Committee.[2] The… …   Wikipedia

  • List of oil field acronyms — Contents 1 # 2 A 3 B 4 C …   Wikipedia

  • Oil well control — is the management of the dangerous effects caused by unexpected high pressures upon surface equipment of oil or gas drilling rigs. Technically, oil well control involves preventing Formation fluid, usually referred to as kick, from entering into… …   Wikipedia

  • petroleum production — Introduction       recovery of crude oil and, often, associated natural gas from the Earth.        petroleum is a naturally occurring hydrocarbon material that is believed to have formed in deep sedimentary (sedimentary rock) beds from animal and …   Universalium

  • Drilling fluid — This article is about fluids used when drilling a well. For fluids used with drill bits during metal working, see cutting fluid. Driller pouring a foaming agent down the rod string on a drilling rig In geotechnical engineering, drilling fluid is… …   Wikipedia

  • Oil well — The pumpjack, such as this one located south of Midland, Texas, is a common sight in West Texas. An oil well is a general term for any boring through the earth s surface that is designed to find and acquire petroleum oil hydrocarbons. Usually… …   Wikipedia

  • Peak oil — A logistic distribution shaped production curve, as originally suggested by M. King Hubbert in 1956 …   Wikipedia

  • Transocean — Ltd. Type Publicly traded limited company (NYSE: RIG, SIX: RIGN …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”