Organic electronics

Organic electronics
Melanin voltage-controlled switch, an "active" organic polymer electronic device from 1974. In Smithsonian collection[1]

Organic electronics, plastic electronics or polymer electronics, is a branch of electronics dealing with conductive polymers, plastics, or small molecules. It is called 'organic' electronics because the polymers and small molecules are carbon-based. This contrasts with traditional electronics (or metal electronics), which relies on inorganic conductors such as copper or silicon.

Most polymer electronics are laminar electronics, a category that also includes transparent electronic package and paper based electronics.

In addition to organic charge transfer complexes, technically, electrically conductive polymers are mostly derivatives of polyacetylene black (the "simplest melanin"). Examples include polyacetylene (PA; more specificially iodine-doped trans-polyacetylene); polyaniline (PANI), when doped with a protonic acid; and poly(dioctyl-bithiophene) (PDOT).

Contents

History

In 1862, Henry Letheby obtained a partly conductive material by anodic oxidation of aniline in sulfuric acid. The material was probably polyaniline.[2] In the 1950s, it was discovered that polycyclic aromatic compounds formed semi-conducting charge-transfer complex salts with halogens.[3] This finding indicated that organic compounds could carry current. High conductivity of 1 S/cm in linear backbone polymers (in an iodine-"doped" and oxidized polypyrrole black) was reported in 1963.[4] Likewise, an actual organic-polymer electronic device was reported in the journal Science in 1974.[5] This device is now in the "Smithsonian Chips" collection of the American Museum of History (see figure).[6]

However, these early discoveries were forgotten. Thus, Alan J. Heeger, Alan G. MacDiarmid, and Hideki Shirakawa are often credited for the "discovery and development" of conductive polymers and were jointly awarded the Nobel Prize in Chemistry in 2000 for their 1977 report of similarly-oxidized and iodine-doped polyacetylene.[2] Because of the numerous earlier reports of similar compounds, reviewers have questioned the Nobel citation's discovery assignment. Thus, Inzelt notes that,[7] while the Nobelists deserve credit for publicising and popularizing the field, conductive polymers were " ..produced, studied and even applied " [8] well before their work.

Conduction mechanisms in such materials involve resonance stabilization and delocalization of pi electrons along entire polymer backbones, as well as mobility gaps, tunneling, and phonon-assisted hopping.[9]

Technology for plastic electronics on thin and flexible plastic substrates was developed at Cambridge University’s Cavendish Laboratory in the 1990s. In 2000, Plastic Logic was spun out of Cavendish Laboratory to develop a broad range of products using the plastic electronics technology.

Features

Conductive polymers are lighter, more flexible, and less expensive than inorganic conductors. This makes them a desirable alternative in many applications. It also creates the possibility of new applications that would be impossible using copper or silicon.

Organic electronics not only includes organic semiconductors, but also organic dielectrics, conductors and light emitters.

New applications include smart windows and electronic paper. Conductive polymers are expected to play an important role in the emerging science of molecular computers.

In general organic conductive polymers have a higher resistance and therefore conduct electricity poorly and inefficiently, as compared to inorganic conductors. Researchers currently are exploring ways of "doping" organic semiconductors, like melanin, with relatively small amounts of conductive metals to boost conductivity. However, for many applications, inorganic conductors will remain the only viable option.

Organic electronics can be printed.

Organic electronic devices

Organics-based flexible display

A 1972 paper in the journal Science[9] proposed a model for electronic conduction in the melanins. Historically, melanin is another name for the various oxidized polyacetylene, polyaniline, and Polypyrrole "blacks" and their mixed copolymers, all commonly-used in present day organic electronic devices. For example, some fungal melanins are pure polyacetylene. This model drew upon the theories of Neville Mott and others on conduction in disordered materials. Subsequently, in 1974, the same workers at the Physics Department of The University of Texas M. D. Anderson Cancer Center reported an organic electronic device, a voltage-controlled switch.[10]

Their material also incidentally demonstrated "negative differential resistance", now a hall-mark of such materials. A contemporary news article in the journal Nature[11] noted this materials "strikingly high conductivity". These researchers further patented batteries, etc. using organic semiconductive materials. Their original "gadget" is now in the Smithsonian's collection of early electronic devices.

This work, like that of the decade-earlier report of high-conductivity in a polypyrrole,[12] was "too early" [13] and went unrecognized outside of pigment cell research until recently. At the time, few except cancer researchers were interested in the electronic properties of conductive polymers, in theory applicable to the treatment of melanoma.

Plastic solar cells

Organic solar cells could cut the cost of solar power by making use of inexpensive organic polymers rather than the expensive crystalline silicon used in most solar cells. What's more, the polymers can be processed using low-cost equipment such as ink-jet printers or coating equipment employed to make photographic film, which reduces both capital and manufacturing costs compared with conventional solar-cell manufacturing.[14]

Silicon thin film solar cells on flexible substrates allow a significant cost reduction of large-area photovoltaics for several reasons [15]:

  1. The so-called 'roll-to-roll'-deposition on flexible sheets is much easier to realize in terms of technological effort than deposition on fragile and heavy glass sheets.
  2. Transport and installation of lightweight flexible solar cells also saves cost as compared to cells on glass.

Inexpensive polymeric substrates like polyethylene terephtalate (PET) or polycarbonate (PC) have the potential for further cost reduction in photovoltaics. Protomorphous solar cells prove to be a promising concept for efficient and low-cost photovoltaics on cheap and flexible substrates for large-area production as well as small and mobile applications.[15]

One advantage of printed electronics is that different electrical and electronic components can be printed on top of each other, saving space and increasing reliability and sometimes they are all transparent. One ink must not damage another, and low temperature annealing is vital if low-cost flexible materials such as paper and plastic film are to be used. There is much sophisticated engineering and chemistry involved here, with iTi, Pixdro, Asahi Kasei, Merck, BASF, HC Starck, Hitachi Chemical and Frontier Carbon Corporation among the leaders.[16]

See also

References

  1. ^ "Organic Semiconductor (I/O), 1973 a melanin (polyacetylenes) bistable switch."
  2. ^ a b The Nobel Prize in Chemistry, 2000: Conductive polymers, nobelprize.org
  3. ^ Herbert Naarmann “Polymers, Electrically Conducting” in Ullmann's Encyclopedia of Industrial Chemistry 2002 Wiley-VCH, Weinheim. doi:10.1002/14356007.a21_429
  4. ^ "High Conductivity in Polypyrroles". Drproctor.com. http://www.drproctor.com/os/weiss.htm. Retrieved 2010-02-14. 
  5. ^ McGinness, John; Corry, Peter; Proctor, Peter (1974). "Amorphous Semiconductor Switching in Melanins". Science 183 (4127): 853–5. doi:10.1126/science.183.4127.853. PMID 4359339. http://www.drproctor.com/os/amorphous.htm. 
  6. ^ Organic Semiconductor (I/O), 1973 a melanin (polyacetylenes) bistable switch.
  7. ^ György Inzelt (2008). Conducting Polymers A New Era in Electrochemistry. Springer. pp. 265–269. doi:10.1007/978-3-540-75930-0_8. ISBN 978-3-540-75930-0. 
  8. ^ "Book Review: György Inzelt, Conducting Polymers – A New Era in Electrochemistry". 2009-12-03. http://hrcak.srce.hr/index.php?show=clanak&id_clanak_jezik=70384&lang=en. Retrieved 2010-07-12. 
  9. ^ a b McGinness JE (1972). "Mobility gaps: a mechanism for band gaps in melanins". Science 177 (4052): 896–7. doi:10.1126/science.177.4052.896. PMID 5054646. 
  10. ^ McGinness J, Corry P, Proctor P (1974). "Amorphous semiconductor switching in melanins". Science 183 (4127): 853–5. doi:10.1126/science.183.4127.853. PMID 4359339. 
  11. ^ "Semiconductors in the human body?". Nature 248 (5448): 475. 1974. doi:10.1038/248475a0. http://www.organicmetals.com/naturea.htm. 
  12. ^ Electronic conduction in polymers. III. Electronic properties of polypyrrole, B. A. Bolto, R. McNeill, and D. E. Weiss (1967)
  13. ^ Noel S. Hush (2003). "An Overview of the First Half-Century of Molecular Electronics". Ann. N.Y. Acad. Sci 1006: 1–20. Bibcode 2003NYASA1006....1H. doi:10.1196/annals.1292.016. PMID 14976006. 
  14. ^ "Mass Production of Plastic Solar Cells". Technology Review. http://www.technologyreview.com/energy/21574/page1/. Retrieved 2010-02-14. 
  15. ^ a b Niedertemperaturabscheidung von Dünnschicht-Silicium für Solarzellen auf Kunststofffolien, Doctoral Thesis by Koch, Christian 2002
  16. ^ Raghu Das, IDTechEx. "Printed electronics, is it a niche? - 25 September 2008". Electronics Weekly. http://www.electronicsweekly.com/Articles/2008/09/25/44587/printed-electronics-is-it-a-niche.htm. Retrieved 2010-02-14. 

External links

  • oeindex - an index for subfields of Organic Electronics
  • orgworld - Organic Semiconductor World homepage

Further reading

  • An Overview of the First Half-Century of Molecular Electronics by Noel S. Hush, Ann. N.Y. Acad. Sci. 1006: 1–20 (2003).
  • Electronic Processes in Organic Crystals and Polymers, 2 ed. by Martin Pope and Charles E. Swenberg, Oxford University Press (1999), ISBN 0195129636
  • Handbook of Organic Electronics and Photonics (3-Volume Set) by Hari Singh Nalwa, American Scientific Publishers. (2008), ISBN 1-58883-095-0

Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • Organic light-emitting diode — Demonstration of a flexible OLED device A green emitting OLED device An …   Wikipedia

  • Organic semiconductor — STM image of self assembled supramolecular chains of the organic semiconductor Quinacridone on Graphite. An organic semiconductor is an organic material with semiconductor properties. Single molecules, short chain (oligomers) and organic polymers …   Wikipedia

  • Organic field-effect transistor — OFET based flexible display An organic field effect transistor (OFET) is a field effect transistor using an organic semiconductor in its channel. OFETs can be prepared either by vacuum evaporation of small molecules, by solution casting of… …   Wikipedia

  • Organic solar cell — An organic photovoltaic cell (OPVC) is a photovoltaic cell that uses organic electronics a branch of electronics that deals with conductive organic polymers or small organic molecules[1] for light absorption and charge transport. The plastic… …   Wikipedia

  • Organic light-emitting transistor — An organic light emitting transistor (OLET) is a form of transistor that emits light. These transistors have been claimed to have potential for digital displays and on chip optical interconnects.[1] OLET is a new light emission concept, providing …   Wikipedia

  • Organic radical battery — (ORB) is a new battery technology being developed by NEC. Advantages ORB s are characterized by an extremely thin profile (0.3 mm), flexibility, and very fast charge time (about 30 seconds), in addition to a relatively high energy density (1 mWh… …   Wikipedia

  • Organic Solderability Preservative — Organic Solderability Preservative, or OSP is a method for plating printed circuit boards. It uses a water based organic compound that selectively bonds to copper and provides an organometallic layer that protects the copper during soldering.… …   Wikipedia

  • Printed electronics — is the term for a relatively new technology that defines the printing of electronics on common media such as paper, plastic, and textile using standard printing processes. This printing preferably utilizes common press equipment in the graphics… …   Wikipedia

  • Molecular electronics — For quantum mechanical study of the electron distribution in a molecule, see stereoelectronics. Molecular electronics, sometimes called moletronics, involves the study and application of molecular building blocks for the fabrication of electronic …   Wikipedia

  • Flexible organic light-emitting diode — Demonstration of a flexible OLED device Demonstration of a battery driven flexible OLED lamp fr …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”