Deflection (engineering)

Deflection (engineering)

In engineering, deflection is the degree to which a structural element is displaced under a load. It may refer to an angle or a distance.

The deflection distance of a member under a load is directly related to the slope of the deflected shape of the member under that load and can be calculated by integrating the function that mathematically describes the slope of the member under that load. Deflection can be calculated by standard formulae (will only give the deflection of common beam configurations and load cases at discrete locations), or by methods such as "virtual work", "direct integration", "Castigliano's method", "Macaulay's method" or the "direct stiffness method" amongst others. The deflection of beam elements is usually calculated on the basis of Euler-Bernoulli beam theory while that of a plate or shell element is calculated using plate theory or shell theory.

An example of the use of deflection in this context is in building construction. Architects and engineers select materials for various applications. The beams used for frame work are selected on the basis of deflection, amongst other factors.

Contents

End load cantilever beams

Deflection of a wide-flange beam (I-beam) in mode 6 deflection.

The elastic deflection f and angle of deflection φ (in radians) in the example image, a (weightless) cantilever beam, with an end load on it, can be calculated (at the free end B) using:

f_B = \frac {F L^3} {(3 E I)}
\phi_B = \frac {F L^2} {(2 E I)}

where

F = force acting on the tip of the beam
L = length of the beam (span)
E = modulus of elasticity
I = area moment of inertia
Deflection of a cantilevered beam

The deflection at any point along the span can be calculated using the above-mentioned methods.


From this formula it follows that the span L and height h are the most determining factors; if the span doubles, the deflection increases 2³ = 8 fold, and if the height doubles, the deflection decreases 2³ = 8 fold.

\delta = \frac {FL^3} {3EI}
I_{x}=\frac{bh^3}{12}

where

b = width (x-dimension),
h = height (y-dimension)


Centre loaded beam

Shows a statically determinate beam, deflecting under an evenly distributed load.

The elastic deflection on a beam, loaded at its centre, supported by two simple supports is given by:

\delta = \frac {FL^3} {48EI}

where:

δ = the deflection of the beam
F = force acting on the centre of the beam
L = length of the beam between the supports
E = modulus of elasticity
I = area moment of inertia

Intermediately loaded beams

The elastic deflection on a beam supported by two simple supports, loaded at a distance a from one of the supports, is given by:

\delta = \frac {Fa^2(L-a)^2} {3EIL}

where:

δ = the deflection of the beam
F = force acting on the beam
L = length of the beam between the supports
E = modulus of elasticity
I = area moment of inertia
a = the distance of the load (F) from one of the supports

Structural deflection

Building codes determine the maximum deflection, usually as a fraction of the span e.g. 1/400 or 1/600. Either the strength limit state (allowable stress) or the serviceability limit state (deflection considerations amongst others) may govern the minimum dimensions of the member required.

The deflection must be considered for the purpose of the structure. When designing a steel frame to hold a glazed panel, one allows only minimal deflection to prevent fracture of the glass.

The deflective shape of a beam can be represented by the moment diagram, integrated.

See also

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • Deflection — or deflexion may refer to: Deflection (engineering), the displacement of a structural element under load Deflection (military), a technique of shooting ahead of a moving target so that the target and projectile will collide Deflection (physics),… …   Wikipedia

  • Structural engineering — is a field of engineering dealing with the analysis and design of structures that support or resist loads. Structural engineering is usually considered a speciality within civil engineering, but it can also be studied in its own right. [cite… …   Wikipedia

  • Slope deflection method — The slope deflection method is a structural analysis method for beams and frames introduced in 1915 by George A. Maney.Citation|first=George A.|last=Maney|year=1915|title=Studies in Engineering|publisher=University of… …   Wikipedia

  • Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign — Department of Civil and Environmental Engineering University of Illinois at Urbana Champaign Newmark Civil Engineering Laboratory …   Wikipedia

  • Heat deflection temperature — The heat deflection temperature or heat distortion temperature (HDT, HDTUL, or DTUL) is the temperature at which a polymer or plastic sample deforms under a specified load. This property of a given plastic material is applied in many aspects of… …   Wikipedia

  • History of structural engineering — The history of structural engineering dates back to at least 2700 BC when the step pyramid for Pharaoh Djoser was built by Imhotep, the first engineer in history known by name. Pyramids were the most common major structures built by ancient… …   Wikipedia

  • Newmark Civil Engineering Laboratory — Newmark Lab Main Entrance Location …   Wikipedia

  • List of structural engineering topics — This page aims to list all articles related to the specific discipline of structural engineering. For a broad overview of engineering, please see List of engineering topics. For biographies please see List of engineers.compactTOC NOTOC AA frame… …   Wikipedia

  • Government College of Engineering,Tirunelveli — Infobox University name =Government College of Engineering, Tirunelveli native name = latin name = motto = established =1981 type =Public endowment = staff = faculty = president = principal = Dr. S. Annadurai rector = chancellor = vice chancellor …   Wikipedia

  • List of aerospace engineering topics — This page aims to list all articles related to the specific discipline of aerospace engineering. For a broad overview of engineering, see List of engineering topics. For biographies, see List of engineers.compactTOC NOTOC AAblation cascade… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”