DIY audio

DIY audio
An example of DIY audio: a functioning battery-operated DAC (Digital-to-analog converter) before installation in a box case

DIY Audio means "do it yourself" audio. Rather than buying a piece of possibly expensive audio equipment, such as a high-end audio amplifier or speaker, the person practicing DIY Audio will make it him/herself. The benefits of doing so include economic concerns, the satisfaction of creating something enjoyable, the possibility that the equipment made is of higher quality than commercially available products, and the feasibility of creating a custom-made device for which no exact equivalent is marketed.

Contents

History of DIY audio

Audio DIY came to prominence in the 50s to 60s, as audio reproduction was relatively new and the technology "complex," audio reproduction equipment, and in particular high performance equipment, was not offered at the retail level. Kits and designs were available for consumers to build their own equipment. Famous vacuum tube kits from Dynaco, Heathkit, and McIntosh, as well as solid state (transistor) kits from Hafler allowed for consumers to build their own hi fidelity systems. Books and magazines were published which explained new concepts regarding the design and operation of vacuum tube and (later) transistor circuits.

While audio equipment has become easily accessible in the current day and age, there still exists an interest in building one's own equipment, including amplifiers, speakers, preamplifiers, and even CD players and turntables. Today, a network of companies, parts vendors, and on-line communities exist to foster this interest. DIY is especially active in loudspeaker and in tube amplification. Both are relatively simple to design and fabricate without access to sophisticated industrial equipment. Both enable the builder to pick and choose between various available parts, on matters of price as well as quality, allow for extensive experimentation, and offer the chance to use exotic or highly labor-intensive solutions, which would be expensive for a manufacturer to implement, but only require personal labor by the DIYer, which is a source of satisfaction to them.

Construction issues

In modern times, integrated circuits make construction of DIY audio systems easier, but the proliferation of surface mount components (which are very small and difficult to solder with a soldering iron) and fine pitch printed circuit boards (PCBs) arguably make the physical act of construction more difficult. Nevertheless surface mounting is often used, as are conventional PCBs and electronic components, while some enthusiasts insist on using old-style perforated cardboard onto which individual components are "hardwired" and soldered. Test equipment is readily available for purchase and enables convenient testing of parts and systems. Specifications of parts and components are readily accessible through the Internet including data sheets and equipment designs.

It has become easier to make audio components from "scratch" rather than from "kits" due to the availability of CAD software for printed circuit board (PCB) layouts and electronic circuit simulation. Such software can be free, and a trial version may also be used. PCB vendors are more accessible than ever, and can manufacture PCBs in small quantities for the do-it-yourselfer. In fact, kits and chemicals for self-manufacturing one's own PCB can be obtained. Electronic parts and components are accessible online or in specialty shops, and various "high-end" parts vendors exist. On the other hand, a wide variety of kits, designs and premanufactured PCBs are available for almost any type of audio component.

To construct a device takes more than knowledge of circuits, many would urge that the mechanical aspects of cabinets, cases and chassis' are the most time consuming aspects of audio DIY. Drilling, metalworking and physical measurements are critical to constructing almost any DIY audio project, especially speakers. Measuring equipment such as a Vernier caliper is often essential. Woodworking skills are required to construct wooden enclosures (e.g. for speakers), with some enthusiasts going beyond traditional woodworking to CNC lathing, and luxurious veneers and lacquers. Room acoustics solutions are also popular among DIYers, as they can be made with cheap and readily available insulating materials, and can be dimensioned to fit each particular room in a precise and aesthetically pleasing way.

DIY audio involves "projects" directed to audio. Many DIY audio people fancy themselves to be audiophiles. These people use rare and expensive parts and components in their projects. Examples are the use of silver wire, expensive capacitors, non-standard solders of various alloys, and use of parts that have been cryogenically cooled.

Vacuum tube or "valve" projects are common in audio DIY. While, for mass market audio components, the vacuum tube has been replaced in modern times with the transistor and IC, the vacuum tube remains prominent in specialty high end audio equipment. Thus, interest exists in building components using vacuum tubes, and the vacuum tube is still widely available. There is a wide variety of tubes manufactured nowadays, and many tubes on the market are advertised as "NOS" ("new, old stock", meaning unused stock of old manufacture); not all of the latter being genuinely NOS. Circuits utilizing tubes often are far less complicated than those utilizing transistors or op-amps. Tube enthusiasts often use transformers, sometimes custom-made ones, or even hand-wind their own transformers using cores and wire of their own choice. Note that vacuum tube projects almost always use dangerously high voltages and should be undertaken with due care.

In case lead-containing solder is used instead of RoHS-compliant solder, appropriate environmental precautions with regard to lead and lead products should be taken.

Motivation

The motivations for DIY audio can include cost, entertainment and quality of workmanship. [1] Many DIYers take considerable personal pride in constructing a device that works to their satisfaction. This is sometimes carried to the extreme, with some makers claiming that their product outperforms any and all similar market products. In many cases this is due to excessive emotional attachment, akin to the attachment a parent feels towards their children. Nevertheless some DIY constructs can indeed possess superior sound quality. Part of the reason is the economics of modern manufacturing and commerce. A manufacturer needs to incorporate several cost factors in product pricing, including wages, housing, insurance, transportation, testing, spare parts, servicing, etc, whereas the retailer needs to mark prices up in order to cover their own expenses, stock, demonstration equipment, etc. All of the aforementioned do not apply to the DIY hobbyist who, furthermore, need not worry about product timing and marketability, and is free to allocate costs solely to superior quality parts. On the other hand a DIYer may not have access to sophisticated equipment and academic-level research, often have to limit themselves to off-the-shelf components, and cannot attain discounts from component suppliers the way a manufacturer may through large consignment orders.[citation needed]

Tweaking and tweakers

Rebuilt and refinished Magnavox wood speaker using a Dayton 2 way crossover, Peerless 6 1/2 inch woofer, and Usher Audio 1 1/8 inch tweeter.

DIY audio can also involve "tweaking" of mass market components. It is thought that mass market audio components are compromised by the use of cheap or inferior internal parts that can be easily replaced with high quality substitutes. As a result, an audio component of improved characteristics may be obtained for relatively low cost. Some common changes include replacing opamps, replacing capacitors (recap), or even replacing resistors in order to increase signal-to-noise ratio. Changing an audio component in this way is similar to what a tweaker or modder does with a personal computer.

Cloning and cloners

Another common practice in the DIY audio community is to attempt to "clone" or copy a preexisting design or component from a commercial manufacturer. This involves obtaining a lawful public version of, or lawfully reverse engineering, the circuit schematics for the design, and/or even the publicly available PCB layouts. Such a "clone" will not be a perfect copy since different brands and types of parts (often newer parts) will be used, and mechanical aspects of construction will likely differ. However, the circuit or other distinguishing features should be the close to the original.

There are many reasons for wanting to recreate an existing design. The design might be historically important and/or out of production, so the only way to obtain the component is to build it. The design might be very simple so copying it is easily done. The commercial product might be very expensive but its design known, so it may be built for far less than it cost to be purchased. The original design may have some sentimental value to the person building the recreation, and the design built for the memories in one's past. The copy may be made to test or evaluate design concepts or principles in the original.

As an example, a well known "clone" includes amplifiers using high power integrated circuits, such as the National Semiconductor LM3875 and LM3886. The use of a high power IC as part of a quality audio amplifier was popularized by the 47 Labs Gaincard amplifier, and thus the DIY amplifiers using power ICs are often called "chipamps" or "Gainclones."

Usually cloning additionally involves improving or tweaking (see above) the original design, potentially by using more modern components (in the case of discontinued designs) or higher quality parts.

See also

Notes


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • DIY (disambiguation) — DIY may refer to: Do it yourself, a term used by various communities that focus on people creating things for themselves without the aid of paid professionals DIY birth, the process of intentionally giving birth without the assistance of a… …   Wikipedia

  • Audio crossover — A passive 2 way crossover designed to operate at loudspeaker voltages Audio crossovers are a class of electronic filter used in audio applications. Most individual loudspeaker drivers are incapable of covering the entire audio spectrum from low… …   Wikipedia

  • DiY-Fest — the touring carnival of Do it Yourself mediamaking was a festival of ultra independent movies, books, zines, music, poetry, and performance art that ran from 1999 until 2002. [1] [2] In 2007, DiY Fest was revived as DiY Fest Video, a DVD… …   Wikipedia

  • Audio Antihero — Logo des Labels Aktive Jahre seit 2009 Gründer Jamie Halliday Sitz London, Vereinigtes Königreich …   Deutsch Wikipedia

  • Digital audio player — A digital audio player, more commonly referred to as an MP3 player, is a consumer electronics device that stores, organizes and plays audio files. Some DAPs are also referred to as portable media players as they have image viewing and/or video… …   Wikipedia

  • High-end audio — is a term used to describe higher priced and/or higher quality audio equipment. Definition of high end High end audio can refer to the build quality of the components, but more specifically, refers to the ability to reproduce a recording with the …   Wikipedia

  • Valve audio amplifier — A valve (UK) audio amplifier or vacuum tube (US) audio amplifier is a valve amplifier used for sound recording, reinforcement, or reproduction. Until the invention of solid state devices such as the transistor, all electronic amplification was… …   Wikipedia

  • High-end audio cables — are claimed to improve the sound quality of high fidelity audio systems but whether they actually do is hotly disputed. Since the audio signal passes through cables on its way from the source to the amplifier, or from the amplifier to the… …   Wikipedia

  • Tellus Audio Cassette Magazine — Launched from the Lower East Side, Manhattan in 1983 as a subscription only bimonthly publication, the Tellus cassette series took full advantage of the popular cassette medium to promote cutting edge downtown music, documenting the New York… …   Wikipedia

  • Hungry Audio — is a Norwich/London based independent record label who s roster includes The Telescopes, Sennen, The Walk Off, The Aprons, Stuffy / The Fuses, My favorite and Master Solo.The label was launched in November of 2004 by its five partners: Adrian… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”