Anti-aliasing filter

Anti-aliasing filter

An anti-aliasing filter is a filter used before a signal sampler, to restrict the bandwidth of a signal to approximately satisfy the sampling theorem. Since the theorem states that unambiguous interpretation of the signal from its samples is possible when the power of frequencies above the Nyquist frequency is zero, a real anti-aliasing filter can generally not completely satisfy the theorem. A realizable anti-aliasing filter will typically permit some aliasing to occur; the amount of aliasing that does occur depends on how good the filter is and what the frequency content of the input signal is.

Anti-aliasing filters are commonly used at the input of digital signal processing systems, for example in sound digitization systems; similar filters are used as reconstruction filters at the output of such systems, for example in music players. In the later case, the filter is to prevent aliasing in the conversion of samples back to a continuous signal, where again perfect stop-band rejection would be required to guarantee zero aliasing.

The theoretical impossibility of realizing perfect filters is not much an impediment in practice, though practical considerations do lead to system design choices such as oversampling to make it easier to realize "good enough" anti-aliasing filters.

Contents

Optical anti-aliasing filter

Anti-aliasing and IR-reject filter from an older digital video camera

In the case of optical image sampling, as by image sensors in digital cameras, the anti-aliasing filter is also known as an optical lowpass filter or blur filter or AA filter. The mathematics of sampling in two spatial dimensions is similar to the mathematics of time-domain sampling, but the filter implementation technologies are different. The typical implementation in digital cameras is two layers of birefringent material such as lithium niobate, which spreads each optical point into a cluster of four points.[1]

The choice of spot separation for such a filter involves a tradeoff among sharpness, aliasing, and fill factor. In a monochrome or three-CCD or Foveon X3 camera, the fill factor alone, if near 100% effective with microlenses, can provide a significant anti-aliasing effect,[2] while in color filter array (CFA, e.g. Bayer filter) cameras, an additional filter is generally needed to reduce aliasing to an acceptable level.[3][4][5]

Applicability of oversampling

A technique known as oversampling is commonly used in audio conversion, especially audio output. The idea is to use a higher intermediate digital sample rate, so that a nearly-ideal digital filter can sharply cut off aliasing near the original low Nyquist frequency, while a much simpler analog filter can stop frequencies above the new higher Nyquist frequency.

The purpose of oversampling is to relax the requirements on the anti-aliasing filter, or to further reduce the aliasing. Since the initial anti-aliasing filter is analog, oversampling allows for the filter to be cheaper because the requirements are not as stringent, and also allows the anti-aliasing filter to have a smoother frequency response, and thus a less complex phase response.

On input, an initial analog anti-aliasing filter is relaxed, the signal is sampled at a high rate, and then downsampled using a nearly ideal digital anti-aliasing filter.

Bandpass signals

Often, an anti-aliasing filter is a low-pass filter; however, this is not a requirement. Generalizations of the Nyquist–Shannon sampling theorem allow sampling of other band-limited passband signals instead of baseband signals – see undersampling.

For signals that are bandwidth limited, but not centered at zero, a band-pass filter can be used as an anti-aliasing filter. For example, this could be done with a single-sideband modulated or frequency modulated signal. If one desired to sample an FM radio broadcast centered at 87.9 MHz and bandlimited to a 200 kHz band, then an appropriate anti-alias filter would be centered on 87.9 MHz with 200 kHz bandwidth (or pass-band of 87.8 MHz to 88.0 MHz), and the sampling rate would be no less than 400 kHz, but should also satisfy other constraints to prevent aliasing.

Signal overload

It is very important to avoid input signal overload when using an anti-aliasing filter. If the signal is strong enough, it can cause clipping at the analog-to-digital converter, even after filtering. When distortion due to clipping occurs after the anti-aliasing filter, it can create components outside the passband of the anti-aliasing filter; these components can then alias, causing the reproduction of other non-harmonically-related frequencies. In digital audio, the resulting aliased distorted signal of "digital clipping" has a characteristic sound that can be easily recognized.

See also

References

  1. ^ Adrian Davies and Phil Fennessy (2001). Digital imaging for photographers (Fourth edition ed.). Focal Press. ISBN 0240515900. http://books.google.com/books?vid=ISBN0240515900&id=wsxk03-gceUC&pg=PA30&lpg=PA30&ots=BlxgR6ZXmz&dq=anti-aliasing+lithium-niobate&sig=YUsQZMtxjtq70oOYWmU1K2yfoNY#PPA30,M1. 
  2. ^ S. B. Campana and D. F. Barbe (1974). "Tradeoffs between aliasing and MTF". Proceedings of the Electro-Optical Systems Design Conference – 1974 West International Laser Exposition – San Francisco, Calif., November 5-7, 1974. Chicago: Industrial and Scientific Conference Management, Inc. p. 1–9. http://adsabs.harvard.edu/abs/1974eosd.conf....1C. 
  3. ^ Brian W. Keelan (2004). Handbook of Image Quality: Characterization and Prediction. Marcel–Dekker. ISBN 0824707702. http://books.google.com/books?vid=ISBN0824707702&id=E45MTZn17gEC&pg=RA1-PA388&lpg=RA1-PA388&ots=noDzLfu2ju&dq=spot+separation+in+optical+anti-aliasing+filters&sig=IWnjfbrjX-oMXNkeW2ZBxH_RBmg. 
  4. ^ Sidney F. Ray (1999). Scientific photography and applied imaging. Focal Press. p. 61. ISBN 9780240513232. http://books.google.com/books?id=AEFPNfghI3QC&pg=PA61&dq=aliasing+fill-factor&lr=&as_brr=3&ei=RBptStasLJCckgSY1NFW. 
  5. ^ Michael Goesele (2004). New Acquisition Techniques for Real Objects and Light Sources in Computer Graphics. Books on Demand. p. 34. ISBN 9783833414893. http://books.google.com/books?id=ZTJJ8QzNv1wC&pg=PA34&dq=aliasing+fill-factor+100%25+bayer&lr=&as_brr=3&ei=xDltStqhOYLckAS-4NRU. 

Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Anti-aliasing — In digital signal processing, anti aliasing is the technique of minimizing the distortion artifacts known as aliasing when representing a high resolution signal at a lower resolution. Anti aliasing is used in digital photography, computer… …   Wikipedia

  • Spatial anti-aliasing — In digital signal processing, spatial anti aliasing is the technique of minimizing the distortion artifacts known as aliasing when representing a high resolution image at a lower resolution. Anti aliasing is used in digital photography, computer… …   Wikipedia

  • Aliasing — This article applies to signal processing, including computer graphics. For uses in computer programming, please refer to aliasing (computing). In statistics, signal processing, computer graphics and related disciplines, aliasing refers to an… …   Wikipedia

  • Filter (Elektronik) — Die Elektrotechnik bezeichnet Schaltungen als Filter, die ein elektrisches Signal abhängig von der Frequenz in der Amplitude und Phase verändern. Dadurch können unerwünschte Signalanteile abgeschwächt und unterdrückt werden. Bekannte Anwendungen… …   Deutsch Wikipedia

  • Filter (Elektrotechnik) — Die Elektrotechnik bezeichnet Schaltungen als Filter, die ein elektrisches Signal abhängig von der Frequenz in der Amplitude und Phase verändern. Dadurch können unerwünschte Signalanteile abgeschwächt und unterdrückt werden. Elektrischer… …   Deutsch Wikipedia

  • Aliasing-Effekt — Als Alias Effekte [ˈeɪliəs] oder Aliasing Effekte werden im Bereich der Signalanalyse Fehler bezeichnet, die durch die Nichtbeachtung des Abtasttheorems (zu geringe Abtastfrequenz) beim digitalen Abtasten von Signalen auftreten. In der… …   Deutsch Wikipedia

  • Filter design — is the process of designing a filter (in the sense in which the term is used in signal processing, statistics, and applied mathematics), often a linear shift invariant filter, which satisfies a set of requirements, some of which are contradictory …   Wikipedia

  • Analog sampled filter — An analog sampled filter an electronic filter that is a hybrid between an analog and a digital filter. The input signal is analog, and usually stored in capacitors. The time domain is discrete, however. Distinct analog samples are shifted through …   Wikipedia

  • Reconstruction filter — In a mixed signal system (analog and digital), a reconstruction filter (or anti imaging filter) is used to construct a smooth analogue signal from the output of a digital to analogue converter (DAC) or other sampled data output device.ampled data …   Wikipedia

  • Elektronischer Filter — Die Elektrotechnik bezeichnet Schaltungen als Filter, die ein elektrisches Signal abhängig von der Frequenz in der Amplitude und Phase verändern. Dadurch können unerwünschte Signalanteile abgeschwächt und unterdrückt werden. Bekannte Anwendungen… …   Deutsch Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”