Geodesic

Geodesic

[
great circle arcs.] In mathematics, a geodesic IPA|/ˌdʒiəˈdɛsɪk, -ˈdisɪk/ [jee-uh-des-ik, -dee-sik] is a generalization of the notion of a "straight line" to "curved spaces". In presence of a metric, geodesics are defined to be (locally) the shortest path between points on the space. In the presence of an affine connection, geodesics are defined to be curves whose tangent vectors remain parallel if they are transported along it.

The term "geodesic" comes from "geodesy", the science of measuring the size and shape of Earth; in the original sense, a geodesic was the shortest route between two points on the Earth's surface, namely, a segment of a great circle. The term has been generalized to include measurements in much more general mathematical spaces; for example, in graph theory, one might consider a geodesic between two vertices/nodes of a graph.

Geodesics are of particular importance in general relativity, as they describe the motion of inertial test particles.

Introduction

The shortest path between two points in a curved space can be found by writing the equation for the length of a curve (a function "f" from an open interval of R to the manifold), and then minimizing this length using the calculus of variations. This has some minor technical problems, because there is an infinite dimensional space of different ways to parametrize the shortest path. It is simpler to demand not only that the curve locally minimize length but also that it is parametrized "with constant velocity", meaning that the distance from "f"("s") to "f"("t") along the geodesic is proportional to|"s"−"t"|. Equivalently, a different quantity may be defined, termed the energy of the curve; minimizing the energy leads to the same equations for a "constant velocity" geodesic. Intuitively, one can understand this second formulation by noting that an elastic band stretched between two points will contract its length, and in so doing will minimize its energy; the resulting shape of the band is a geodesic.

In Riemannian geometry geodesics are not the same as "shortest curves" between two points, though the two concepts are closely related. The difference is that geodesics are only "locally" the shortest distance between points, and are parametrized with "constant velocity". Going the "long way round" on a great circle between two points on a sphere is a geodesic but not the shortest path between the points. The map "t"→"t"2 from the unit interval to itself gives the shortest path between 0 and 1, but is not a geodesic because the velocity of the corresponding motion of a point is not constant.

Geodesics are commonly seen in the study of Riemannian geometry and more generally metric geometry. In relativistic physics, geodesics describe the motion of point particles under the influence of gravity alone. In particular, the path taken by a falling rock, an orbiting satellite, or the shape of a planetary orbit are all geodesics in curved space-time. More generally, the topic of sub-Riemannian geometry deals with the paths that objects may take when they are not free, and their movement is constrained in various ways.

This article presents the mathematical formalism involved in defining, finding, and proving the existence of geodesics, in the case of Riemannian and pseudo-Riemannian manifolds. The article geodesic (general relativity) discusses the special case of general relativity in greater detail.

Examples

The most familiar examples are the straight lines in Euclidean geometry. On a sphere, the images of geodesics are the great circles.The shortest path from point "A" to point "B" on a sphere is given by the shorter piece of the great circle passing through "A" and "B". If "A" and "B" are antipodal points (like the North pole and the South pole), then there are "infinitely many" shortest paths between them.

Metric geometry

In metric geometry, a geodesic is a curve which is everywhere locally a distance minimizer. More precisely, a curve γ: "I" → "M" from an interval "I" of the reals to the metric space "M" is a geodesic if there is a constant "v" ≥ 0 such that for any "t" ∈ "I" there is a neighborhood "J" of "t" in "I" such that for any "t"1, "t"2 ∈ "J" we have

:d(gamma(t_1),gamma(t_2))=v|t_1-t_2|.,

This generalizes the notion of geodesic for Riemannian manifolds. However, in metric geometry the geodesic considered is often equipped with natural parametrization, i.e. in the above identity "v" = 1 and

:d(gamma(t_1),gamma(t_2))=|t_1-t_2|.,

If the last equality is satisfied for all "t"1, "t"2 ∈"I", the geodesic is called a minimizing geodesic or shortest path.

In general, a metric space may have no geodesics, except constant curves. At the other extreme, any two points in a length metric space are joined by a minimizing sequence of rectifiable paths, although this minimizing sequence need not converge to a geodesic.

(Pseudo-)Riemannian geometry

A geodesic on a smooth manifold "M" with an affine connection ∇ is defined as a curve γ("t") such that parallel transport along the curve preserves the tangent vector to the curve, so: abla_{dotgamma} dotgamma= 0at each point along the curve, where dotgamma is the derivative with respect to t.

Using local coordinates on "M", we can write the geodesic equation (using the summation convention) as:frac{d^2x^lambda }{dt^2} + Gamma^{lambda}_{~mu u }frac{dx^mu }{dt}frac{dx^ u }{dt} = 0 ,where x^mu (t) are the coordinates of the curve γ("t") and Gamma^{lambda }_{~mu u } are the Christoffel symbols of the connection ∇. This is just an ordinary differential equation for the coordinates. It has a unique solution, given an initial position and an initial velocity. Therefore, from the point of view of classical mechanics, geodesics can be thought of as trajectories of free particles in a manifold.

Geodesics for a (pseudo-)Riemannian manifold "M" are defined to be geodesics for its Levi-Civita connection.In a Riemannian manifold a geodesic is the same as a curve that locally minimizes the length :l(gamma)=int_gamma sqrt{ g(dotgamma(t),dotgamma(t)) },dt ,and is parametrized so that the tangent vector has constant length. Geodesics can also be defined as extremal curves for the following action energy functional:S(gamma)=frac{1}{2}int g(dotgamma(t),dotgamma(t)),dt,where g is a Riemannian (or pseudo-Riemannian) metric. In pure mathematics, this quantity would generally be referred to as an energy. The geodesic equation can then be obtained as the Euler–Lagrange equations of motion for this action.

In a similar manner, one can obtain geodesics as a solution of the Hamilton–Jacobi equations, with (pseudo-)Riemannian metric taken as Hamiltonian. See Riemannian manifolds in Hamiltonian mechanics for further details.

Existence and uniqueness

The "local existence and uniqueness theorem" for geodesics states that geodesics on a smooth manifold with an affine connection exist, and are unique; this is a variant of the Frobenius theorem. More precisely:

:For any point "p" in "M" and for any vector "V" in "T""p""M" (the tangent space to "M" at "p") there exists a unique geodesic gamma , : "I" → "M" such that ::gamma(0) = p , and ::dotgamma(0) = V,:where "I" is a maximal open interval in R containing 0.

In general, "I" may not be all of R as for example for an open disc in R2. The proof of this theorem follows from the theory of ordinary differential equations, by noticing that the geodesic equation is a second-order ODE. Existence and uniqueness then follow from the Picard-Lindelöf theorem for the solutions of ODEs with prescribed initial conditions. γ depends smoothly on both "p" and "V".

Geodesic flow

Geodesic flow is an mathbb R-action on tangent bundle T(M) of a manifold M defined in the following way :G^t(V)=dotgamma_V(t)where tin mathbb R, Vin T(M) and gamma_V denotes the geodesic with initial data dotgamma_V(0)=V.

It defines a Hamiltonian flow on (co)tangent bundle with the (pseudo-)Riemannian metric as the Hamiltonian. In particular it preserves the (pseudo-)Riemannian metric g, i.e.:g(G^t(V),G^t(V))=g(V,V).That makes possible to define geodesic flow on unit tangent bundle UT(M) of the Riemannian manifold M when the geodesic gamma_V is of unit speed.

Geodesic spray

The geodesic flow defines a family of curves in the tangent bundle. The derivatives of these curves define a vector field on the total space of the tangent bundle, known as the geodesic spray.

Affine and projective geodesics

In the presence of a metric, geodesics are (locally) the length-minimizing curves. However, even if a manifold lacks a metric, geodesics are still well-defined in the presence of an affine connection. A curve in such a manifold is a geodesic if its tangent vector remains parallel to the curve when it is transported along it. Geodesics defined in this way carry a preferred class of affine parameterizations. These are those parameterizations for which: abla_{dot{gamma}(t)}dot{gamma}(t) = 0.

This equation is invariant under affine reparameterizations; that is, parameterizations of the form:tmapsto at+bwhere "a" and "b" are constant real numbers.

An affine connection is "determined by" its family of affinely parameterized geodesics, up to torsion harv|Spivak|1999|loc=Chapter 6, Addendum I. The torsion itself does not, in fact, affect the family of geodesics, since the geodesic equation depends only on the symmetric part of the connection. More precisely, if abla, ar{ abla} are two connections such that the difference tensor:D(X,Y) = abla_XY-ar{ abla}_XYis skew-symmetric, then abla and ar{ abla} have the same geodesics, with the same affine parameterizations. Furthermore, there is a unique connection having the same geodesics as abla, but with vanishing torsion.

Geodesics without a particular parameterization are described by a projective connection.

ee also


* Basic introduction to the mathematics of curved spacetime
* Complex geodesic
* Differential geometry of curves
* Exponential map
* Geodesic dome
* Geodesic (general relativity)
* Geodesics as Hamiltonian flows
* Hopf-Rinow theorem
* Intrinsic metric
* Jacobi field
* Quasigeodesic
* Solving the geodesic equations
* Barnes Wallis, who applied geodesics to aircraft structural design in the design of the Vickers Wellesley and Vickers Wellington aircraft, and the R100 airship.

References

*. "See chapter 2".
*. "See section 2.7".
*. "See section 1.4".
*. "See section 87".
*
*. Note especially pages 7 and 10.
*Citation | last1=Spivak | first1=Michael | author1-link=Michael Spivak | title=A Comprehensive introduction to differential geometry (Volume 2) | publisher=Publish or Perish | location=Houston, TX | isbn=978-0-914098-71-3 | year=1999
*. "See chapter 3".

External links

* [http://www.black-holes.org/relativity5.html Caltech Tutorial on Relativity] — A nice, simple explanation of geodesics with accompanying animation.


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • geodesic — [jē΄ə des′ik, jē΄ōdē′sik] adj. 1. GEODETIC (sense 1) 2. a) designating the shortest surface line between two points on a surface, esp. a curved surface b) of or pertaining to the geometry of such lines ☆ 3. Archit. having a structurally strong… …   English World dictionary

  • Geodesic — Ge o*des ic (j[=e] [ o]*d[e^]s [i^]k), Geodesical Ge o*des ic*al ( [i^]*kal), a. [Cf. F. g[ e]od[ e]sique.] 1. (Math.) Of or pertaining to geodesy; geodetic. [1913 Webster] 2. (Architecture) Made of lightweight structural supporting elements… …   The Collaborative International Dictionary of English

  • geodesic — 1821, from GEODESY (Cf. geodesy) surveying + IC (Cf. ic). Alternative adjective form geodetic is from 1834; geodetical is from c.1600. Geodesic dome attested from 1953 …   Etymology dictionary

  • geodesic — ► ADJECTIVE 1) referring to the shortest possible line between two points on a sphere or other curved surface. 2) (of a dome) constructed from struts which follow geodesic lines and form an open framework of triangles and polygons …   English terms dictionary

  • Geodesic — Ge o*des ic, n. A geodetic line or curve. [1913 Webster] …   The Collaborative International Dictionary of English

  • geodesic — adj. (also geodetic) 1 of or relating to geodesy. 2 of, involving, or consisting of a geodesic line. Phrases and idioms: geodesic dome a dome constructed of short struts along geodesic lines. geodesic line the shortest possible line between two… …   Useful english dictionary

  • geodesic — /jee euh des ik, dee sik/, adj. 1. Also, geodesical. pertaining to the geometry of curved surfaces, in which geodesic lines take the place of the straight lines of plane geometry. n. 2. See geodesic line. [1815 25; < F géodésique. See GEODESY,… …   Universalium

  • geodesic — ge•o•des•ic [[t]ˌdʒi əˈdɛs ɪk, ˈdi sɪk[/t]] adj. Also, ge o•des′i•cal 1) math. pertaining to the geometry of curved surfaces, in which geodesic lines take the place of the straight lines of plane geometry 2) pertaining to geodesy; geodetic 3)… …   From formal English to slang

  • geodesic — /dʒioʊˈdɛsɪk/ (say jeeoh desik), / ˈdisɪk/ (say deesik) adjective Also, geodesical. 1. relating to the geometry of curved surfaces, in which geodesic lines take the place of the straight lines of plane geometry. –noun 2. a geodesic line …  

  • geodesic — I. adjective Date: 1821 1. geodetic 2. made of light straight structural elements mostly in tension < a geodesic dome > II. noun Date: 1883 the shortest line between two points that lies in a given surface …   New Collegiate Dictionary

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”