- Machine head
A machine head, also called a tuner, gear head, or tuning machine, is part of a string instrument ranging from guitars to double basses, a geared apparatus for tensioning and thereby tuning a string, usually located at the
headstock . A headstock has several machine heads, one per string. Non-geared tuning devices as used on violins, violas, cellos, lutes and (formerly) Flamenco guitars and ukuleles are known as tuning pegs.Construction and action
Traditionally, a single machine head consists of a cylinder or capstan, mounted at the center of a
pinion gear, a knob or "button" and aworm gear that links them. The capstan has a hole through the far end from the gear, and the string is made to go through that hole, and is wrapped around the capstan. To complete the string installation, the string is tightened by turning the capstan using the tuning knob. The worm gear ensures that the capstan cannot turn without a movement on the knob; it also allows precise tuning.Banjo s usually employ a different mechanism usingplanetary gears - in this case the knob and the capstan both rotate on the same axis. A few guitars (e.g. the originalGibson Firebird , early Gibson basses andMario Maccaferri 's plastic instruments) have used this design.The guitarist adjusts the tension of the various strings using the knobs so that they are correctly tuned: a higher tension yields a sharper pitch, a lower tension a flatter pitch. Typical tensions for steel-string acoustic guitars with "light" tension strings are 10.5
kgf (23.3lbf , 103 N) to 13.8 kgf (30.2 lbf, 135 N).Varieties
Normally, worm gears provide a
gear ratio of 14:1, though versions with 18:1 gear ratio also exist. They provide better accuracy in fine tuning, though are somewhat slower for initial string winding.Several kinds of machine head apparatus exist:
* onclassical guitar s (with nylon strings), the worm gears are generally exposed; the strings are wound on the pins inside grooves in the head;
* on steel-string guitars, including "folk" acoustic guitars andelectric guitar s, the worm gears are generally placed in individual sealed enclosures with permanentlubrication , although budget models may have exposed gears fixed on plates housing a row of gears; several machine head placements are possible, depending on the shape of theheadstock :
** rectangular head, 2 rows of 3 pins (or 6 pins for 12-string guitars): found on most "Folk" and "Jazz" guitars and onGibson Les Paul guitars;
** a single diagonal row of 6 pins: found onFender Telecaster and Stratocaster guitars;
** one diagonal row of four pins and one diagonal row of two pins: found on Music Man guitars;
* onbass guitar s, where string tension is extremely high, larger, heavier-duty machine heads than those used on guitars are used. Bass tuners generally feature larger knobs than guitar tuners as well; often these are distinctively shaped, and known as "elephant ears." Gear ratios of 20:1 are used often. Exposed gears are much more common in premium bass guitars than in six string non-bass instruments.Since 1950s, guitar performance techniques evolved, and aggressive usage of
tremolo arm became widespread. However, the original machine heads couldn't withstand the rigors of constant string tension changing, and strings got out of tune after using tremolo several times. Several manufacturers, including Grover andFloyd Rose , introduced a new design, commonly named "locking machine heads" nowadays: a machine head with additional mechanism to lock it in place and stabilize tuning while playing and using tremolo. However, such machine heads reached limited success, mostly because of their price:as of 2006 , locking ones are about 50% more expensive than original. Many break strings when tension is increased while the mechanism is locked and later unlocked, which frequently happens in music stores.Note that on some guitars, such as those with
Floyd Rose bridge, string tuning may be also conducted using "microtuning" tuners located at guitar bridge. In this case, main machine heads at headstock may be missing entirely, as well as the headstock itself.Likewise, 'headless' guitars and basses, notably those designed by
Steinberger and their licensed imitations, such as theHohner Jack Bass, and unlicensed imitations such as theWashburn Bantam, have the machine heads at the body end.Steinberger s andHohner s require specialist double-ball end strings, whereas theWashburn Bantam can take regular strings.Notable designs
Several manufacturers established well-known designs of knobs and whole machine heads. These designs are subject to copy and reference:
* Rodgers
* Grover-style
* Schaller-style
* Kluson-style
* Gotoh-style
* Wilkinson-style
* Fender-style
* Gibson-style
*Speedwinder
* Sperzel-style
* Dean - style
* ESP - styleReferences
There are several US patents on machine heads, mostly covering various aspects of locking:
* US patent reference
number=5285709
y=1994|m=02|d=15
inventor=John D. Grant
title=Machine head for tuning a stringed instrument, especially a guitar or the like
* US patent reference
number=D388817
y=1998|m=01|d=06
inventor=Han Soo Kang
title=Machine head for a guitar
* US patent reference
number=D389508
y=1998|m=01|d=20
inventor=Han Soo Kang
title=Machine head for guitar
* US patent reference
number=6078001
y=2000|m=06|d=20
inventor=Han Soo Kang
title=Machine head for guitars
* US patent reference
number=6580022
y=2003|m=06|d=17
inventor=Han Soo Kang
title=Machine head for guitar
Wikimedia Foundation. 2010.