- Air pollution dispersion terminology
Air pollution dispersion terminology describes the words and
technical terms that have a special meaning to those who work in the field of air pollution dispersion modeling. Governmental environmental protection agencies (local, state, province and national) of many countries have also adopted and used much of the terminology in their laws and regulations regarding air pollutioncontrol.
It should be noted that some of the words and technical terms in Air pollution dispersion terminology quite often have other special meanings when used in fields of activity other than air pollution dispersion modeling.
Air pollution emission plumes
There are three primary types of air pollution
Buoyantplumes — Plumes which are lighter than air because they are at a higher temperatureand lower densitythan the ambient air which surrounds them, or because they are at about the same temperature as the ambient air but have a lower molecular weight and hence lower density than the ambient air. For example, the emissions from the flue gas stacksof industrial furnaces are buoyant because they are considerably warmer and less dense than the ambient air. As another example, an emission plume of methanegas at ambient air temperatures is buoyant because methane has a lower molecular weight than the ambient air.
* Dense gas plumes — Plumes which are heavier than air because they have a higher density than the surrounding ambient air. A plume may have a higher density than air because it has a higher molecular weight than air (for example, a plume of
carbon dioxide). A plume may also have a higher density than air if the plume is at a much lower temperature than the air. For example, a plume of evaporated gaseous methane from an accidental release of liquefied natural gas(LNG) may be as cold as -161 °C.
* Passive or neutral plumes — Plumes which are neither lighter or heavier than air.
Air pollution dispersion models
There are five types of air pollution dispersion models, as well as some hybrids of the five types: [
Compilation of atmospheric dispersion models]
* Box model — The box model is the simplest of the model types. [ [http://apollo.lsc.vsc.edu/classes/met130/notes/chapter18/dispersion_intro.html Air Pollution Dispersion: Ventilation Factor] by Dr. Nolan Atkins, Lyndon State College] It assumes the
airshed(i.e., a given volume of atmospheric air in a geographical region) is in the shape of a box. It also assumes that the air pollutants inside the box are homogeneously distributed and uses that assumption to estimate the average pollutant concentrations anywhere within the airshed. Although useful, this model is very limited in its ability to accurately predict dispersion of air pollutants over an airshed because the assumption of homogeneous pollutant distribution is much too simple.
*Gaussian model — The Gaussian model is perhaps the oldest (circa 1936) [Bosanquet, C.H. and Pearson, J.L. (1936)."The spread of smoke and gases from chimney", Trans. Faraday Soc., 32:1249.] and perhaps the most commonly used model type. It assumes that the air pollutant dispersion has a Gaussian distribution, meaning that the pollutant distribution has a normal probability distribution. Gaussian models are most often used for predicting the dispersion of continuous, buoyant air pollution plumes originating from ground-level or elevated sources. Gaussian models may also be used for predicting the dispersion of non-continuous air pollution plumes (called "puff models"). The primary algorithm used in Gaussian modeling is the "Generalized Dispersion Equation For A Continuous Point-Source Plume". [Atmospheric Dispersion Modeling] cite book|author=Beychok, Milton R.|title=
Fundamentals Of Stack Gas Dispersion|edition=4th Edition|publisher=author-published|year=2005|id=ISBN 0-9644588-0-2 (Chapter 8, page 124)]
*Lagrangian model — a Lagrangian dispersion model mathematically follows pollution plume parcels (also called particles) as the parcels move in the atmosphere and they model the motion of the parcels as a
random walkprocess. The Lagrangian model then calculates the air pollution dispersion by computing the statistics of the trajectories of a large number of the pollution plume parcels. A Lagrangian model uses a moving frame of reference[http://rem.jrc.cec.eu.int/etex/37.htm Features of Dispersion Models] publication of the European UnionJoint Research Centre (JRC)] as the parcels move from their initial location. It is said that an observer of a Lagrangian model follows along with the plume.
*Eulerian model — an Eulerian dispersions model is similar to a Lagrangian model in that it also tracks the movement of a large number of pollution plume parcels as they move from their initial location. The most important difference between the two models is that the Eulerian model uses a fixed three-dimensional
Cartesian gridas a frame of reference rather than a moving frame of reference. It is said that an observer of an Eulerian model watches the plume go by.
*Dense gas model — Dense gas models are models that simulate the dispersion of dense gas pollution plumes (i.e., pollution plumes that are heavier than air). The three most commonly used dense gas models are:
**The DEGADIS model developed by Dr. Jerry Havens and Dr. Tom Spicer at the
University of Arkansasunder commission by the US Coast Guard and US EPA. [ [http://www.epa.gov/scram001/dispersion_alt.htm DEGADIS Technical Manual and User's Guide] (US EPA's download website)]
** The SLAB model developed by the
Lawrence Livermore National Laboratoryfunded by the US Department of Energy, the US Air Force and the American Petroleum Institute. [ [http://support.lakes-environmental.com/Models/SLAB/slabman.pdf SLAB User's Manual] ]
** The HEGADAS model developed by Shell Oil's research division. [ [http://www.hgsystem.com/tech_ref/Chap07.pdf HEGADIS Technical Reference Manual] ]
Air pollutant emission sources
The types of air pollutant emission sources are commonly characterized as either point, line, area or volume sources:
* Point source — A point source is a single, identifiable source of air pollutant emissions (for example, the emissions from a
combustionfurnace flue gas stack). Point sources are also characterized as being either elevated or at ground-level. A point source has no geometricdimensions.
* Line sources — A line source is one-dimensional source of air pollutant emissions (for example, the emissions from the vehicular traffic on a roadway).
* Area source — An area source is a two-dimensional source of diffuse air pollutant emissions (for example, the emissions from a
forest fire, a landfillor the evaporated vapors from a large spill of volatile liquid).
* Volume source — A volume source is a three-dimensional source of diffuse air pollutant emissions. Essentially, it is an area source with a third (height) dimension (for example, the fugitive gaseous emissions from
piping flanges, valvesand other equipment at various heights within industrial facilities such as oil refineriesand petrochemicalplants). Another example would be the emissions from an automobile paint shop with multiple roof vents or multiple open windows.
Other air pollutant emission source characterizations are:
* Sources may be characterized as either urban or rural because urban areas constitute a so-called "heat island" and the heat rising from an urban area causes the atmosphere above an urban area to be more turbulent than the atmosphere above a rural area.
* Sources may be characterized by their elevation relative to the ground as either surface or ground-level, near surface or elevated sources.
* Sources may also be characterized by their time duration:
** puff or intermittent: short term sources (for example, many accidental emission releases are short term puffs)
** continuous: a long term source (for example, most flue gas stack emissions are continuous)
Characterization of atmospheric turbulence
The amount of
turbulencein the ambient atmosphere has a major effect on the dispersion of air pollution plumes because turbulence increases the entrainment and mixing of unpolluted air into the plume and thereby acts to reduce the concentration of pollutants in the plume (i.e, enhances the plume dispersion). It is therefore important to categorize the amount of atmospheric turbulence present at any given time.
The Pasquill atmospheric stability classes
The oldest and, for a great many years, the most commonly used method of categorizing the amount of atmospheric turbulence present was the method developed by Pasquill in 1961. [Pasquill, F. (1961). "The estimation of the dispersion of windborne material", The Meteorological Magazine, vol 90, No. 1063, pp 33-49.] He categorized the atmospheric turbulence into six stability classes named A, B, C, D, E and F with class A being the most unstable or most turbulent class, and class F the most stable or least turbulent class. Table 1 lists the six classes and Table 2 provides the meteorological conditions that define each class.
For air dispersion modeling exercises, the conditions of dual stability classes like A – B, B – C and C – D can be considered as B, C and D respectively.
Table 1: The Pasquill stability classes
Table 2: Meteorological conditions that define the Pasquill stability classes
Historical stability class data, known as the Stability Array (STAR) data, for sites within the USA can be purchased from the National Climatic Data Center (NCDC). [ [http://www.ncdc.noaa.gov/oa/climate/rcsg/specialized.html NCDC website for ordering stability array data] ]
Advanced methods of categorizing atmospheric turbulence
Many of the more advanced air pollution dispersion models do not categorize atmospheric turbulence by using the simple meteorological parameters commonly used in defining the six Pasquill classes as shown in Table 2. The more advanced models use some form of Monin-Obukhov similarity theory.
For example, the US EPA's most advanced model,
AERMOD, [http://www.epa.gov/scram001/7thconf/aermod/aermod_mfd.pdf AERMOD:Description of Model Formulation] ] no longer uses the Pasquill stability classes to categorize atmospheric turbulence. Instead, it uses the surface roughness lengthand the Monin-Obukhov length.
As another example, the
United Kingdom's most advanced model, ADMS 3, [http://www.cerc.co.uk/software/adms3.htm Model developer's description of ADMS 3] (click on "next" for more description)] uses the Monin-Obukhov length, the boundary layerheight and the windspeed to categorize the atmospheric turbulence.
The detailed explanation of the mathematical formulation for the turbulence categorization methods used in AERMOD, ADMS 3 and other advanced air pollution dispersion models is very complex and beyond the scope of this article. More detailed explanations are available on the Internet.
Miscellaneous other terminology
::"(Work on this section is continuously in progress)"
*Building effects or downwash: When an air pollution plume flows over nearby buildings or other structures, turbulent eddies are formed in the downwind side of the building. Those eddies cause a plume from a stack source located within about five times the height of a nearby building or structure to be forced down to the ground much sooner than it would if a building or structure were not present. The effect can greatly increase the resulting near-by ground-level pollutant concentrations downstream of the building or structure. If the pollutants in the plume are subject to depletion by contact with the ground (
particulates, for example), the concentration increase just downstream of the building or structure will decrease the concentrations further downstream.
*Deposition of the pollution plume components to the underlying surface can be defined as either dry or wet deposition:
**Dry deposition is the removal of gaseous or particulate material from the pollution plume by contact with the ground surface or vegetation (or even water surfaces) through transfer processes such as absorption and gravitational
sedimentation. This may be calculated by means of a "deposition velocity", which is related to the resistance of the underlying surface to the transfer.
**Wet deposition is the removal of pollution plume components by the action of rain. The wet deposition of radionuclides in a pollution plume by a burst of rain often forms so called "hot spots" of radioactivity on the underlying surface.
*Inversion layers: Normally, the air near the
Earth's surface is warmer than the air above it because the atmosphere is heated from below as solar radiation warms the earth's surface, which in turn then warms the layer of the atmosphere directly above it. Thus, the atmospheric temperature normally decreases with increasing altitude. However, under certain meteorological conditions, atmospheric layers may form in which the temperature increases with increasing altitude. Such layers are called inversion layers. When such a layer forms at the earth's surface, it is called a surface inversion. When an inversion layer forms at some distance above the earth, it is called an inversion aloft (sometimes referred to as a " capping inversion"). The air within an inversion aloft is very stable with very little vertical motion. Any rising parcel of air within the inversion soon expands, thereby adiabatically cooling to a lower temperature than the surrounding air and the parcel stops rising. Any sinking parcel soon compresses adiabatically to a higher temperature than the surrounding air and the parcel stops sinking. Thus, any air pollution plume that enters an inversion aloft will undergo very little vertical mixing unless it has sufficient momentumto completely pass through the inversion aloft. That is one reason why an inversion aloft is sometimes called a capping inversion.
*Mixing height: When an inversion aloft is formed, the atmospheric layer between the earth's surface and the bottom of the inversion aloft is known as the mixing layer and the distance between the earth's surface and the bottom of inversion aloft is known as the mixing height. Any air pollution plume dispersing beneath an inversion aloft will be limited in vertical mixing to that which occurs beneath the bottom of the inversion aloft (sometimes called the "lid"). Even if the pollution plume penetrates the inversion, it will not undergo any further significant vertical mixing. As for a pollution plume passing completely through an inversion layer aloft, that rarely occurs unless the pollution plume's source stack is very tall and the inversion lid is fairly low.
Air pollution dispersion models
Bibliography of atmospheric dispersion modeling
AP 42 Compilation of Air Pollutant Emission Factors
Atmospheric dispersion modeling
Roadway air dispersion modeling
Useful conversions and formulas for air dispersion modeling
Compilation of air dispersion models
For those who would like to learn more about this topic, it is suggested that either one of the following books be read:
*cite book | author=Turner, D.B. | title=Workbook of atmospheric dispersion estimates: an introduction to dispersion modeling| edition=2nd Edition| publisher=CRC Press | year=1994 | id=ISBN 1-56670-023-X [http://www.crcpress.com/shopping_cart/products/product_detail.asp?sku=L1023&parent_id=&pc= www.crcpress.com]
*cite book|author=Beychok, Milton R.|title=
Fundamentals of Stack Gas Dispersion|edition=4th Edition|publisher=author-published|year=2005|id=ISBN 0-9644588-0-2 [http://www.air-dispersion.com www.air-dispersion.com]
* [http://www.epa.gov/scram001/dispersion_prefrec.htm EPA's Preferred/Recommended Models] (on the US EPA's website)
* [http://pandora.meng.auth.gr/mds/strquery.php?wholedb The Model Documententation System (MDS)] of the European Topic Centre on Air and Climate Change (part of the
European Environment Agency)
Wikimedia Foundation. 2010.
Look at other dictionaries:
Atmospheric dispersion modeling — Industrial air pollution source Atmospheric dispersion modeling is the mathematical simulation of how air pollutants disperse in the ambient atmosphere. It is performed with computer programs that solve the mathematical equations and algorithms… … Wikipedia
List of atmospheric dispersion models — Atmospheric dispersion models are computer programs that use mathematical algorithms to simulate how pollutants in the ambient atmosphere disperse and, in some cases, how they react in the atmosphere. Contents 1 U.S. Environmental Protection… … Wikipedia
Compilation of atmospheric dispersion models — Atmospheric dispersion models are computer programs that use mathematical algorithms to simulate how pollutants in the ambient atmosphere disperse and, in some cases, how they react in the atmosphere. The dispersion models are used to estimate or … Wikipedia
Point source pollution — A point source of pollution is a single identifiable localized source of air, water, thermal, noise or light pollution. A point source has negligible extent, distinguishing it from other pollution source geometries. The sources are called point… … Wikipedia
UK Dispersion Modelling Bureau — The UK Dispersion Modelling Bureau is part of the Met Office (originally an abbreviation for Meteorological Office, but now the official name in itself) which is the UK s national weather and meteorological service. The meteorologists in the… … Wikipedia
Fundamentals Of Stack Gas Dispersion — infobox book name=Fundamentals of Stack Gas Dispersion image caption= author=Milton R. Beychok language=English subject= Air dispersion modeling publisher=Milton R. Beychok release date=2005 (4th Edition) media type=Soft cover pages=201 (21.5 cm… … Wikipedia
UK Atmospheric Dispersion Modelling Liaison Committee — The UK Atmospheric Dispersion Modelling Liaison Committee (ADMLC) is composed of representatives from UK governmental departments, agencies and research organizations as well as from non governmental organizations and groups. The ADML s purpose… … Wikipedia
Area source (pollution) — Area sources are sources of pollution which emit a substance or radiation from a specified area. For example, area sources of air pollution are air pollution sources which operate within a certain region. Locomotives operating on certain tracks… … Wikipedia
Volume source (pollution) — A Volume source of pollution is a three dimensional source of pollutant emissions. Essentially, it is an area source with a third dimension.Examples of a volume source of pollution are:* Dust emissions from the wind erosion of uncovered gravel… … Wikipedia
National Environmental Research Institute of Denmark — NERI, the National Environmental Research Institute of Denmark (Danish: Danmarks Miljøundersøgelser or simply DMU) is an independent research institute under the Aarhus University. NERI undertakes scientific consultancy work and monitoring of… … Wikipedia