Aeolian processes


Aeolian processes

Aeolian (or Eolian or Æolian) processes pertain to the activity of the winds and more specifically, to the winds' ability to shape the surface of the Earth and other planets. Winds may erode, transport, and deposit materials, and are effective agents in regions with sparse vegetation and a large supply of unconsolidated sediments. Although water is much more powerful than wind, aeolian processes are important in arid environments such as deserts.

The term is derived from the name of the Greek god, Æolus, the keeper of the winds.

Wind erosion

Wind erodes the Earth's surface by deflation (the removal of loose, fine-grained particles), by the turbulent eddy action of the wind and by abrasion (the wearing down of surfaces by the grinding action and sandblasting of windborne particles).

Regions which experience intense and sustained erosion are called deflation zones. Most aeolian deflation zones are composed of desert pavement, a sheet-like surface of rock fragments that remains after wind and water have removed the fine particles. Almost half of Earth's desert surfaces are stony deflation zones. The rock mantle in desert pavements protects the underlying material from deflation.

A dark, shiny stain, called desert varnish or rock varnish, is often found on the surfaces of some desert rocks that have been exposed at the surface for a long period of time. Manganese, iron oxides, hydroxides, and clay minerals form most varnishes and provide the shine.

Deflation basins, called blowouts, are hollows formed by the removal of particles by wind. Blowouts are generally small, but may be up to several kilometers in diameter.

Wind-driven grains abrade landforms. Grinding by particles carried in the wind creates grooves or small depressions. Ventifacts are rocks which have been cut, and sometimes polished, by the abrasive action of wind.

Sculpted landforms, called yardangs, are up to tens of meters high and kilometers long and are forms that have been streamlined by desert winds. The famous sphinx at Giza in Egypt may be a modified yardang.


Timothy H. O'Sullivan, USGS, 1871)
Structures_created_by_wind_erosion,_which_has_differentially_removed_rock_according_to_hardness_and_the_height_of_wind-blown_sand;_Timna,_Negev, Israel.
Sand_blowing_off_a_crest_in_the_Kelso Dunes of the Mojave Desert, California.

Transport

Particles are transported by winds through suspension, saltation, and creep.

Small particles may be held in the atmosphere in suspension. Upward currents of air support the weight of suspended particles and hold them indefinitely in the surrounding air. Typical winds near Earth's surface suspend particles less than 0.2 millimeters in diameter and scatter them aloft as dust or haze.

Saltation is downwind movement of particles in a series of jumps or skips. Saltation normally lifts sand-size particles no more than one centimeter above the ground, and proceeds at one-half to one-third the speed of the wind. A saltating grain may hit other grains that jump up to continue the saltation. The grain may also hit larger grains that are too heavy to hop, but that slowly creep forward as they are pushed by saltating grains. Surface creep accounts for as much as 25 percent of grain movement in a desert.

Aeolian turbidity currents are better known as dust storms. Air over deserts is cooled significantly when rain passes through it. This cooler and denser air sinks toward the desert surface. When it reaches the ground, the air is deflected forward and sweeps up surface debris in its turbulence as a dust storm.

Crops, people, villages, and possibly even climates are affected by dust storms. Some dust storms are intercontinental, a few may circle the globe, and occasionally they may engulf entire planets. When the Mariner 9 spacecraft entered its orbit around Mars in 1971, a dust storm lasting one month covered the entire planet, thus delaying the task of photo-mapping the planet's surface.

Most of the dust carried by dust storms is in the form of silt-size particles. Deposits of this windblown silt are known as loess. The thickest known deposit of loess, 335 meters, is on the Loess Plateau in China. In Europe and in the Americas, accumulations of loess are generally from 20 to 30 meters thick.

Small whirlwinds, called dust devils, are common in arid lands and are thought to be related to very intense local heating of the air that results in instabilities of the air mass. Dust devils may be as much as one kilometer high.



Dust storm approaching Spearman, Texas April 14, 1935.
Dust storm in Amarillo, Texas. FSA photo by Arthur Rothstein (1936)
A_massive_sand storm cloud is close to enveloping a military camp as it rolls over Al Asad, Iraq, just before nightfall on April 27, 2005.

Deposition

Wind-deposited materials hold clues to past as well as to present wind directions and intensities. These features help us understand the present climate and the forces that molded it. Wind-deposited sand bodies occur as sand sheets, ripples, and dunes.

Sand sheets are flat, gently undulating sandy plots of sand surfaced by grains that may be too large for saltation. They form approximately 40 percent of aeolian depositional surfaces. The Selima Sand Sheet, which occupies 60,000 square kilometers in southern Egypt and northern Sudan, is one of the Earth's largest sand sheets. The Selima is absolutely flat in some places; in others, active dunes move over its surface.

Wind blowing on a sand surface ripples the surface into crests and troughs whose long axes are perpendicular to the wind direction. The average length of jumps during saltation corresponds to the wavelength, or distance between adjacent crests, of the ripples. In ripples, the coarsest materials collect at the crests. This distinguishes small ripples from dunes, where the coarsest materials are generally in the troughs.

Wind-blown sand moves up the gentle upwind side of the dune by saltation or creep. Sand accumulates at the brink, the top of the slipface. When the buildup of sand at the brink exceeds the angle of repose, a small avalanche of grains slides down the slipface. Grain by grain, the dune moves downwind.

Accumulations of sediment blown by the wind into a mound or ridge, dunes have gentle upwind slopes on the wind-facing side. The downwind portion of the dune, the lee slope, is commonly a steep avalanche slope referred to as a slipface. Dunes may have more than one slipface. The minimum height of a slipface is about 30 centimeters.

Some of the most significant experimental measurements on aeolian sand movement were performed by Ralph Alger Bagnold, a British engineer who worked in Egypt prior to World War II. Bagnold investigated the physics of particles moving through the atmosphere and deposited by wind. He recognized two basic dune types, the crescentic dune, which he called "barchan," and the linear dune, which he called longitudinal or "sief" (Arabic for "sword").


Death Valley National Park.
Death Valley looking toward the Cottonwood Mountains from the north west arm of Star Dune (2003)
Holocene_eolianite deposit on Long Island, The Bahamas. This unit is formed of wind-blown carbonate grains.

ee also

*Saltation
*Dune
*Barchan
*Médanos
*Sandhills
*Blowouts
*Ventifact
*Dreikanter
*Yardang
*Cross-bedding
*Wind Erosion on European Light Soils
*The Physics of Blown Sand and Desert Dunes
*Bagnold formula
*Aeolian landform

References

*cite web | last = | first = | authorlink = | coauthors = | title = Eolian Processes | publisher = USGS | date = 1997 | url = http://pubs.usgs.gov/gip/deserts/eolian/ | format = HTML | accessdate = 2006-11-01

External links

* [http://www.lbk.ars.usda.gov/wewc/biblio/bar.htm The Bibliography of Aeolian Research]
* [http://digital.library.unt.edu/permalink/meta-dc-1551:1 "Facts about wind erosion and dust storms on the Great Plains"] hosted by the [http://digital.library.unt.edu/browse/department/govdocs/ UNT Government Documents Department]


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Aeolian landform — is a feature of the Earth s surface produced by either the erosive or constructive action of the wind. It must be noted, however, that this process is not unique to earth, and it has been observed and studied on other planets, most notably Mars… …   Wikipedia

  • Aeolian — may refer to: * things related to Æolus, the Greek God of wind * Aeolian harp, a harp that is played by the wind * Aeolian processes, wind generated geologic processes * Aeolians, an ancient Greek tribe said to be descended from Æolus * Aeolian… …   Wikipedia

  • Sediment — Cobbles on a beach River Rhône flowing into Lake Geneva …   Wikipedia

  • Dune — For other uses, see Dune (disambiguation). Erg Chebbi, Morocco …   Wikipedia

  • Wind — For other uses, see Wind (disambiguation). Wind, from the …   Wikipedia

  • Desert pavement — near Barstow, California, in the Mojave Desert. A desert pavement is a desert surface that is covered with closely packed, interlocking angular or rounded rock fragments of pebble and cobble size …   Wikipedia

  • Olympia Undae — Mars Global Digital Dune Database MC 1 map showing the North Polar Sand Sea. Olympia Undae is the area with dune coverage between 120° to 240°E longitude …   Wikipedia

  • Weathering — This article is about weathering of rocks and minerals. For weathering of polymers, see Polymer degradation and Weather testing of polymers. Weathering is the breaking down of rocks, soils and minerals as well as artificial materials through… …   Wikipedia

  • Ripple marks — Ancient wave ripple marks in sandstone, Moenkopi Formation, Capitol Reef National Park, Utah …   Wikipedia

  • Erg (landform) — For other uses, see Erg (disambiguation). Issaouane Erg, Algeria. (31°11 …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.