Drilling engineering

Drilling engineering

Drilling engineering is a subset of petroleum engineering.

Drilling engineers design and implement procedures to drill wells as safely and economically as possible. They work closely with the drilling contractor, service contractors, and compliance personnel, as well as with geologists and other technical specialists. The drilling engineer has the responsibility for ensuring that costs are minimized while getting information to evaluate the formations penetrated, protecting the health and safety of workers and other personnel, and protecting the environment.[1]

Contents

Overview

The planning phases involved in drilling an oil or gas well typically involve estimating the value of sought reserves, estimating the costs to access reserves, acquiring property by a mineral lease, a geological survey, a well bore plan, and a layout of the type of equipment required to reach the depth of the well. Drilling engineers are in charge of the process of planning and drilling the wells. Their responsibilities include:

  1. Designing well programs (e.g., casing sizes and setting depths) to prevent blowouts (uncontrolled well-fluid release) while allowing adequate formation evaluation.
  2. Designing or contributing to the design of casing strings and cementing plans, directional drilling plans, drilling fluids programs, and drill string and drill bit programs.
  3. Specifying equipment, material and ratings and grades to be used in the drilling process.
  4. Providing technical support and audit during the drilling process.
  5. Performing cost estimates and analysis.
  6. Developing contracts with vendors.

Drilling engineers are often degreed as petroleum engineers, although they may come from other technical disciplines (e.g., mechanical engineering or geology) and subsequently be trained by an oil and gas company. They also may have practical experience as a rig hand or mudlogger or mud engineer.

See also

Suggested Reading

  • Hyne, N.J. (2000), Nontechnical Guide to Petroleum Geology, Exploration, Drilling and Production
  • Journal of Petroleum Technology, Society of Petroleum Engineers

References



Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • Drilling fluid invasion — is a process that occurs in a well being drilled with higher wellbore pressure than formation pressure. The liquid component of the drilling fluid (known as the mud filtrate) continues to invade the porous and permeable formation until the solids …   Wikipedia

  • Drilling fluid — This article is about fluids used when drilling a well. For fluids used with drill bits during metal working, see cutting fluid. Driller pouring a foaming agent down the rod string on a drilling rig In geotechnical engineering, drilling fluid is… …   Wikipedia

  • Drilling riser — joints with buoyancy modules A drilling riser is a conduit that provides a temporary extension of a subsea oil well to a surface drilling facility. Drilling risers are categorised into two types: marine drilling risers used with subsea blowout… …   Wikipedia

  • Engineering geology — is the application of the geologic sciences to engineering practice for the purpose of assuring that the geologic factors affecting the location, design, construction, operation and maintenance of engineering works are recognized and adequately… …   Wikipedia

  • Drilling rig — For a detailed diagram of a Petroleum drilling rig, see List of components of oil drilling rigs. Drilling rig preparing rock blasting …   Wikipedia

  • Drilling — For other uses, see Drilling (disambiguation). Drilling is a cutting process that uses a drill bit to cut or enlarge a hole in solid materials. The drill bit is a multipoint, end cutting tool. It cuts by applying pressure and rotation to the… …   Wikipedia

  • Drilling mud — In geotechnical engineering, drilling mud, also known as spud mud (when beginning the drilling process), is a drilling fluid used to drill boreholes into the earth. Often used while drilling oil and natural gas wells and on exploration drilling… …   Wikipedia

  • Drilling and blasting — Before the advent of tunnel boring machines, drilling and blasting was the only economical way of excavating long tunnels through hard rock, where digging is not possible. Even today, the method is still used in the construction of tunnels, such… …   Wikipedia

  • Department of Petroleum Engineering and Applied Geophysics, NTNU — Institutt for Petroleumsteknologi og anvendt Geofysikk Established 1973 Type Public university …   Wikipedia

  • petroleum engineering — Introduction       the branch of engineering that involves the development and exploitation of crude oil and natural gas fields as well as the technical analysis and forecasting of their future performance. Its origins lie in both mining… …   Universalium

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”