Lewis structure

Lewis structure
The Lewis structure of water.

Lewis structures (also known as Lewis dot diagrams, electron dot diagrams, and electron dot structures) are diagrams that show the bonding between atoms of a molecule and the lone pairs of electrons that may exist in the molecule.[1][2][3] A Lewis structure can be drawn for any covalently bonded molecule, as well as coordination compounds. The Lewis structure was named after Gilbert Newton Lewis, who introduced it in his 1916 article The Atom and the Molecule.[4] They are similar to electron dot diagrams in that the valence electrons in lone pairs are represented as dots, but they also contain lines to represent shared pairs in a chemical bond (single, double, triple, etc.).

Lewis structures show each atom and its position in the structure of the molecule using its chemical symbol. Lines are drawn between atoms that are bonded to one another (pairs of dots can be used instead of lines). Excess electrons that form lone pairs are represented as pairs of dots, and are placed next to the atoms.

Although many of the elements react by gaining, losing or sharing electrons until they have achieved a valence shell electron configuration with a full octet (8) of electrons, there are many noteworthy exceptions to the 'octet rule'. Hydrogen(H) conforms instead to a duet rule wherein it fills its first (and outermost) shell with just two electrons or empties it completely. Some compounds like boron trifluoride have incomplete orbitals whle other such as sulphur hexafluoride have valence shell with more than eight electrons.



Counting electrons

The total number of electrons represented in a Lewis structure is equal to the sum of the numbers of valence electrons on each individual atom. Non-valence electrons are not represented in Lewis structures.

The octet rule states atoms with eight electrons in their valence shell will be stable, regardless of whether these electrons are bonding or nonbonding. The rule applies well to acidic compounds. The 18-Electron rule is operative on atoms from period 4, which have to achieve 18 electrons to their orbitals and achieve a stable configuration which has the same electron configuration as a Noble gas. Similarly from period 6, the atoms have to achieve 32 electrons to fill their orbitals.

Placing electrons

Lewis structures for oxygen, fluorine, the hydrogen sulfate anion, and formamide

Once the total number of available electrons has been determined, electrons must be placed into the structure. They should be placed initially as lone pairs: one pair of dots for each pair of electrons available. Lone pairs should initially be placed on outer atoms (other than hydrogen) until each outer atom has eight electrons in bonding pairs and lone pairs; extra lone pairs may then be placed on the central atom. When in doubt, lone pairs should be placed on more electronegative atoms first.

Once all lone pairs are placed, atoms, especially the central atoms, may not have an octet of electrons. In this case, the atoms must form a double bond; a lone pair of electrons is moved to form a second bond between the two atoms. As the bonding pair is shared between the two atoms, the atom that originally had the lone pair still has an octet; the other atom now has two more electrons in its valence shell.

Aside from organic compounds, only a minority of compounds have an octet of electrons. Incomplete octets are common for compounds of groups 2 and 13 such as beryllium, boron, and aluminium. Compounds with more than eight electrons in the Lewis representation of the valence shell of an atom are called hypervalent, and are common for elements of groups 15 to 18, such as phosphorus, sulfur, iodine, and xenon.

Lewis structures for polyatomic ions may be drawn by the same method. When counting electrons, negative ions should have extra electrons placed in their Lewis structures; positive ions should have fewer electrons than an uncharged molecule.

When the Lewis structure of an ion is written, the entire structure is placed in brackets, and the charge is written as a superscript on the upper right, outside the brackets.

A simpler method has been proposed for constructing Lewis structures eliminating the need for electron counting: the atoms are drawn showing the valence electrons, bonds are then formed by pairing up valence electrons of the atoms involved in the bond-making process and anions and cations are formed by adding or removing electrons to/from the appropriate atoms.[5]

A trick is to count up valence electrons, then count up the number of electrons needed to complete the octet rule (or with Hydrogen just 2 electrons), then take the difference of these two numbers and your answer is the number of electrons that make up the bonds. The rest of the electrons just go and fill all the other atoms' octets.

Formal charge

In terms of Lewis structures, formal charge is used in the description, comparison and assessment of likely topological and resonance structures[6] by determining the apparent electronic charge of each atom within, based upon its electron dot structure assuming exclusive covalency or non-polar bonding. It has uses in determining possible electron re-configuration when referring to reaction mechanisms, and often results in the same sign as the partial charge of the atom, with exceptions. In general, the formal charge of an atom can be calculated using the following formula, assuming non-standard definitions for the markup used:

C_f = N_v - U_e - B_n\


  • Cf is the Formal charge.
  • Nv represents the number of valence electrons in a free atom of the element.
  • Ue represents the number of unshared electrons on the atom.
  • Bn represents the total number of bonds the atom has with another.

The formal charge of an atom is computed as the difference between the number of valence electrons that a neutral atom would have and the number of electrons that belong to it in the Lewis structure. Electrons in covalent bonds are split equally between the atoms involved in the bond. The total of the formal charges on an ion should be equal to the charge on the ion, and the total of the formal charges on a neutral molecule should be equal to zero.


For some molecules and ions, it is difficult to determine which lone pairs should be moved to form double or triple bonds. This is sometimes the case when multiple atoms of the same type surround the central atom, and is especially common for polyatomic ions.

When this situation occurs, the molecule's Lewis structure is said to be a resonance structure, and the molecule exists as a resonance hybrid. Each of the different possibilities is superimposed on the others, and the molecule is considered to have a Lewis structure equivalent to an average of these states.

The nitrate ion (NO3-), for instance, must form a double bond between nitrogen and one of the oxygens to satisfy the octet rule for nitrogen. However, because the molecule is symmetrical, it does not matter which of the oxygens forms the double bond. In this case, there are three possible resonance structures. Expressing resonance when drawing Lewis structures may be done either by drawing each of the possible resonance forms and placing double-headed arrows between them or by using dashed lines to represent the partial bonds.

When comparing resonance structures for the same molecule, usually those with the fewest formal charges contribute more to the overall resonance hybrid. When formal charges are necessary, resonance structures that have negative charges on the more electronegative elements and positive charges on the less electronegative elements are favored.

The resonance structure should not be interpreted to indicate that the molecule switches between forms, but that the molecule acts as the average of multiple forms.

Example: Lewis structure of the nitrite ion

The formula of the nitrite ion is NO2.

  • Step one: Nitrogen is the least electronegative atom, so it is the central atom by multiple criteria.
  • Step two: Count valence electrons. Nitrogen has 5 valence electrons; each oxygen has 6, for a total of (6 × 2) + 5 = 17. The ion has a charge of −1, which indicates an extra electron, so the total number of electrons is 18.
  • Step three: Place ion pairs. Each oxygen must be bonded to the nitrogen, which uses four electrons — two in each bond. The 14 remaining electrons should initially be placed as 7 lone pairs. Each oxygen may take a maximum of 3 lone pairs, giving each oxygen 8 electrons including the bonding pair. The seventh lone pair must be placed on the nitrogen atom.
  • Step four: Satisfy the octet rule. Both oxygen atoms currently have 8 electrons assigned to them. The nitrogen atom has only 6 electrons assigned to it. One of the lone pairs on an oxygen atom must form a double bond, but either atom will work equally well. We therefore must have a resonance structure.
  • Step five: Tie up loose ends. Two Lewis structures must be drawn: one with each oxygen atom double-bonded to the nitrogen atom. The second oxygen atom in each structure will be single-bonded to the nitrogen atom. Place brackets around each structure, and add the charge (−) to the upper right outside the brackets. Draw a double-headed arrow between the two resonance forms.

Alternative formats

Two varieties of condensed structural formula, both showing butane
A skeletal diagram of butane
A space filling diagram for butane.

Chemical structures may be written in more compact forms, particularly when showing organic molecules. In condensed structural formulas, many or even all of the covalent bonds may be left out, with subscripts indicating the number of identical groups attached to a particular atom. Another shorthand structural diagram is the skeletal formula (also known as a bond-line formula or carbon skeleton diagram). In skeletal formulae, carbon atoms are not signified by the symbol C but by the vertices of the lines. Hydrogen atoms bonded to carbon are not shown — they can be inferred by counting the number of bonds to a particular carbon atom — each carbon is assumed to have four bonds in total, so any bonds not shown are, by implication, to hydrogen atoms.

Other diagrams may be more complex than Lewis structures, showing bonds in 3D using various forms such as space filling diagrams.

See also


  1. ^ IUPAC definition of Lewis formula
  2. ^ Zumdahl, S. (2005) Chemical Principles Houghton-Mifflin (ISBN 0-618-37206-7)
  3. ^ Miessler, G. L., Tar, D. A., (2003) "Inorganic Chemistry" 2nd ed. Pearson Prentice-Hall (ISBN 0-130-35471-6)
  4. ^ Lewis, G. N. The Atom and the Molecule. J. Am. Chem. Soc. 1916, 38, 762-785. doi:10.1021/ja02261a002
  5. ^ Simplified Lewis Structure Drawing for Non-science Majors Miburo, Barnabe B. J. Chem. Educ. 1993 75 317. Link
  6. ^ Miessler, G. L., Tar, D. A., (2003), p53 - Explanation of formal charge usage.

Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Lewis (disambiguation) — Lewis is the largest island of the Western Isles of Scotland.Lewis may also refer to: * Lewis (surname), a family nameIn U.S. places: * Lewis, Colorado * Lewis, Indiana * Lewis, Iowa * Lewis, Kansas * Lewis, Essex County, New York * Lewis, Lewis… …   Wikipedia

  • Lewis conjugate — In chemistry, a Lewis conjugate might mean:* The conjugate base of a Lewis acid or the conjugate acid of a Lewis base * A molecule having a conjugated system of bonds in its Lewis structure …   Wikipedia

  • Lewis Miller Cottage — Lewis Miller Cottage, Chautauqua Institution U.S. National Register of Historic Places U.S. National Historic Landmark …   Wikipedia

  • Lewis Coser — Lewis A. Coser Lewis Alfred Coser (27 novembre 1913 le 8 juillet 2003) était un sociologue américain d origine allemande. Né à Berlin, Coser a été le premier sociologue à tenter d appliquer le fonctionnalisme à l analyse du conflit. Ses… …   Wikipédia en Français

  • Lewis alfred coser — Lewis A. Coser Lewis Alfred Coser (27 novembre 1913 le 8 juillet 2003) était un sociologue américain d origine allemande. Né à Berlin, Coser a été le premier sociologue à tenter d appliquer le fonctionnalisme à l analyse du conflit. Ses… …   Wikipédia en Français

  • Lewis Hine — Lewis Wickes Hine (September 26, 1874 – November 3, 1940), was an American photographer. For Hine, the camera was both a research tool and an instrument of social reform.Early lifeBorn in Oshkosh, Wisconsin, in 1874. After his father died in an… …   Wikipedia

  • Lewis A. Coser — Lewis Alfred Coser (27 novembre 1913 le 8 juillet 2003) était un sociologue américain d origine allemande. Né à Berlin, Coser a été le premier sociologue à tenter d appliquer le fonctionnalisme à l analyse du conflit. Ses recherches ont porté… …   Wikipédia en Français

  • Lewis C. Bidamon — Lewis Crum Bidamon Born January 16, 1806(1806 01 16)[1] Harmony Township, Pennsylvania Died February 11, 1891(1891 02 11) (aged 85) Nauvoo House, Na …   Wikipedia

  • Lewis Turco — Lewis P. Turco (born May 2, 1934), is an American poet, teacher, and writer of fiction and non fiction. Turco is an advocate for Formalist poetry (or New Formalism) in the United States.Life and workTurco took a keen interest in poetry as a… …   Wikipedia

  • Lewis A. Coser — Lewis Alfred Coser, ursprünglich Ludwig Cohen, manchmal auch abweichend Ludwig Cohn (* 27. November 1913 in Berlin; † 8. Juli 2003 in Cambridge, Massachusetts), wirkte als Soziologe in den USA. Der Sohn einer wohlhabenden und gebildeten Familie… …   Deutsch Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.