Kahan summation algorithm

Kahan summation algorithm

In numerical analysis, the Kahan summation algorithm (also known as compensated summation) significantly reduces the numerical error in the total obtained by adding a sequence of finite precision floating point numbers, compared to the obvious approach. This is done by keeping a separate running compensation (a variable to accumulate small errors).

In particular, simply summing n numbers in sequence has a worst-case error that grows proportional to n, and a root mean square error that grows as \sqrt{n} for random inputs (the roundoff errors form a random walk).[1] With compensated summation, the worst-case error bound is independent of n, so a large number of values can be summed with an error that only depends on the floating-point precision.[1]

The algorithm is attributed to William Kahan.[2] Similar, earlier techniques are, for example, Bresenham's line algorithm, keeping tab of the accumulated error in integer operations (although first documented around the same time[3]) and the Delta-sigma modulation[4] (integrating, not just summing the error).

Contents

The algorithm

In pseudocode, the algorithm is:

function KahanSum(input)
    var sum = 0.0
    var c = 0.0          //A running compensation for lost low-order bits.
    for i = 1 to input.length do
        y = input[i] - c    //So far, so good: c is zero.
        t = sum + y         //Alas, sum is big, y small, so low-order digits of y are lost.
        c = (t - sum) - y   //(t - sum) recovers the high-order part of y; subtracting y recovers -(low part of y)
        sum = t             //Algebraically, c should always be zero. Beware eagerly optimising compilers!
        //Next time around, the lost low part will be added to y in a fresh attempt.
    return sum

Worked example

This example will be given in decimal. Computers typically use binary arithmetic, but the principle being illustrated is the same. Suppose we are using six-digit decimal floating point arithmetic, sum has attained the value 10000.0, and the next two values of input(i) are 3.14159 and 2.71828. The exact result is 10005.85987, which rounds to 10005.9. With a plain summation, each incoming value would be aligned with sum and many low order digits lost (by truncation or rounding.) The first result, after rounding, would be 10003.1. The second result would be 10005.81828 before rounding, and 10005.8 after rounding. This is not correct.

However, with compensated summation, we get the correct rounded result of 10005.9.

Assume that c has the initial value zero.

  y = 3.14159 - 0                   y = input[i] - c
  t = 10000.0 + 3.14159
    = 10003.1                       Many digits have been lost!
  c = (10003.1 - 10000.0) - 3.14159 This must be evaluated as written! 
    = 3.10000 - 3.14159             The assimilated part of y recovered, vs. the original full y.
    = -.0415900                     Trailing zeros shown because this is six-digit arithmetic.
sum = 10003.1                       Thus, few digits from input(i) met those of sum.

The sum is so large that only the high-order digits of the input numbers are being accumulated. But on the next step, c gives the error.

  y = 2.71828 - -.0415900           The shortfall from the previous stage gets included.
    = 2.75987                       It is of a size similar to y: most digits meet.
  t = 10003.1 + 2.75987             But few meet the digits of sum.
    = 10005.85987, rounds to 10005.9
  c = (10005.9 - 10003.1) - 2.75987 This extracts whatever went in.
    = 2.80000 - 2.75987             In this case, too much.
    = .040130                       But no matter, the excess would be subtracted off next time.
sum = 10005.9                       Exact result is 10005.85987, this is correctly rounded to 6 digits.

So the summation is performed with two accumulators: sum holds the sum, and c accumulates the parts not assimilated into sum, to nudge the low-order part of sum the next time around. Thus the summation proceeds with "guard digits" in c which is better than not having any but is not as good as performing the calculations with double the precision of the input. However, simply increasing the precision of the calculations is not practical in general; if input is already double precision, few systems supply quadruple precision and if they did, input could then be quadruple precision!

Accuracy

A careful analysis of the errors in compensated summation is needed to appreciate its accuracy characteristics. While it is more accurate than naive summation, it can still give large relative errors for ill-conditioned sums.

Suppose that one is summing n values xi, for i=1,...,n. The exact sum is:

S_n = \sum_{i=1}^n x_i (computed with infinite precision)

With compensated summation, one instead obtains Sn + En, where the error En is bounded above by:[1]

|E_n| \leq \left[ 2\varepsilon + O(n\varepsilon^2) \right] \sum_{i=1}^n |x_i|

where ε is the machine precision of the arithmetic being employed (e.g. ε≈10−16 for IEEE standard double precision floating point). Usually, the quantity of interest is the relative error | En | / | Sn | , which is therefore bounded above by:

\frac{|E_n|}{|S_n|} \leq \left[ 2\varepsilon + O(n\varepsilon^2) \right] \frac{\sum_{i=1}^n |x_i|}{\left| \sum_{i=1}^n x_i \right|}.

In the expression for the relative error bound, the fraction Σ|xi|/|Σxi| is the condition number of the summation problem. Essentially, the condition number represents the intrinsic sensitivity of the summation problem to errors, regardless of how it is computed.[5] The relative error bound of every (backwards stable) summation method by a fixed algorithm in fixed precision (i.e. not those that use arbitrary precision arithmetic, nor algorithms whose memory and time requirements change based on the data), is proportional to this condition number.[1] An ill-conditioned summation problem is one in which this ratio is large, and in this case even compensated summation can have a large relative error. For example, if the summands xi are uncorrelated random numbers with zero mean, the sum is a random walk and the condition number will grow proportional to \sqrt{n}. On the other hand, for random inputs with nonzero mean the condition number asymptotes to a finite constant as n\to\infty. If the inputs are all non-negative, then the condition number is 1.

Given a condition number, the relative error of compensated summation is effectively independent of n. In principle, there is the O(nε2) that grows linearly with n, but in practice this term is effectively zero: since the final result is rounded to a precision ε, the nε2 term rounds to zero unless n is roughly 1/ε or larger.[1] In double precision, this corresponds to an n of roughly 1016, much larger than most sums. So, for a fixed condition number, the errors of compensated summation are effectively O(ε), independent of n.

In comparison, the relative error bound for naive summation (simply adding the numbers in sequence, rounding at each step) grows as On) multiplied by the condition number.[1] This worst-case error is rarely observed in practice, however, because it only occurs if the rounding errors are all in the same direction. In practice, it is much more likely that the rounding errors have a random sign, with zero mean, so that they form a random walk; in this case, naive summation has a root mean square relative error that grows as O(\varepsilon \sqrt{n}) multiplied by the condition number.[6] This is still much worse than compensated summation, however. Note, however, that if the sum can be performed in twice the precision, then ε is replaced by ε2 and naive summation has a worst-case error comparable to the O(nε2) term in compensated summation at the original precision.

By the same token, the Σ|xi| that appears in En above is a worst-case bound that occurs only if all the rounding errors have the same sign (and are of maximum possible magnitude).[1] In practice, it is more likely that the errors have random sign, in which case terms in Σ|xi| are replaced by a random walk—in this case, even for random inputs with zero mean, the error En grows only as O(\varepsilon \sqrt{n}) (ignoring the nε2 term), the same rate the sum Sn grows, canceling the \sqrt{n} factors when the relative error is computed. So, even for asymptotically ill-conditioned sums, the relative error for compensated summation can often be much smaller than a worst-case analysis might suggest.

Alternatives

Although Kahan's algorithm achieves O(1) error growth for summing n numbers, only slightly worse O(log n) growth can be achieved by pairwise summation: one recursively divides the set of numbers into two halves, sums each half, and then adds the two sums.[1] This has the advantage of requiring the same number of arithmetic operations as the naive summation (unlike Kahan's algorithm, which requires more arithmetic). The base case of the recursion could in principle be the sum of only one (or zero) numbers, but to amortize the overhead of recursion one would normally use a larger base case. The equivalent of pairwise summation is used in many fast Fourier transform (FFT) algorithms, and is responsible for the logarithmic growth of roundoff errors in those FFTs.[7] In practice, with roundoff errors of random signs, the root mean square errors of cascade summation actually grow as O(\sqrt{\log n}).[6]

Another alternative is to use arbitrary precision arithmetic, which in principle need do no rounding at all at the cost of much greater computational effort. A way of performing exactly rounded sums using arbitrary precision that is extended adaptively using multiple floating-point components, to minimize computational cost in common cases where high precision is not needed, was described by Shewchuk.[8][9] Another method that uses only integer arithmetic, but a large accumulator was described by Kirchner and Kulisch[10]; a hardware implementation was described by Müller, Rüb and Rülling[11].

Computer languages

In principle, a sufficiently aggressive optimizing compiler could destroy the effectiveness of Kahan summation: for example, if the compiler simplified expressions according to the associativity rules of real arithmetic, it might "simplify" the second step in the sequence t = sum + y; c = (t - sum) - y; to ((sum + y) - sum) - y; then to c = 0;, eliminating the error compensation.[12] In practice, many compilers do not use associativity rules (which are only approximate in floating-point arithmetic) in simplifications unless explicitly directed to do so by compiler options enabling "unsafe" optimizations,[13][14][15][16] although the Intel C++ Compiler is one example that allows associativity-based transformations by default.[17] The original K&R C version of the C programming language allowed the compiler to re-order floating-point expressions according to real-arithmetic associativity rules, but the subsequent ANSI C standard prohibited re-ordering in order to make C better suited for numerical applications (and more similar to Fortran, which also prohibits re-ordering),[18] although in practice compiler options can re-enable re-ordering as mentioned above.

In general, built-in "sum" functions in computer languages typically provide no guarantees that a particular summation algorithm will be employed, much less Kahan summation.[citation needed] The BLAS standard for linear algebra subroutines explicitly avoids mandating any particular computational order of operations for performance reasons,[19] and BLAS implementations typically do not use Kahan summation.

The standard library of the Python computer language specifies an fsum function for exactly rounded summation, using the Shewchuk algorithm to track multiple partial sums.

References

  1. ^ a b c d e f g h Higham, Nicholas J. (1993), "The accuracy of floating point summation", SIAM Journal on Scientific Computing 14 (4): 783–799, doi:10.1137/0914050 
  2. ^ Kahan, William (January 1965), "Further remarks on reducing truncation errors", Communications of the ACM 8 (1): 40, doi:10.1145/363707.363723 
  3. ^ Jack E. Bresenham, "Algorithm for computer control of a digital plotter", IBM Systems Journal, Vol. 4, No.1, January 1965, pp. 25–30
  4. ^ H. Inose, Y. Yasuda, J. Murakami, "A Telemetering System by Code Manipulation – ΔΣ Modulation," IRE Trans on Space Electronics and Telemetry, Sep. 1962, pp. 204–209.
  5. ^ L. N. Trefethen and D. Bau, Numerical Linear Algebra (SIAM: Philadelphia, 1997).
  6. ^ a b Manfred Tasche and Hansmartin Zeuner Handbook of Analytic-Computational Methods in Applied Mathematics Boca Raton, FL: CRC Press, 2000).
  7. ^ S. G. Johnson and M. Frigo, "Implementing FFTs in practice, in Fast Fourier Transforms, edited by C. Sidney Burrus(2008).
  8. ^ Jonathan R. Shewchuk, Adaptive Precision Floating-Point Arithmetic and Fast Robust Geometric Predicates, Discrete and Computational Geometry, vol. 18, pp. 305–363 (October 1997).
  9. ^ Raymond Hettinger, Recipe 393090: Binary floating point summation accurate to full precision, Python implementation of algorithm from Shewchuk (1997) paper (28 March 2005).
  10. ^ R. Kirchner, U. W. Kulisch, Accurate arithmetic for vector processors, Journal of Parallel and Distributed Computing 5 (1988) 250-270
  11. ^ M. Muller, C. Rub, W. Rulling [1], Exact accumulation of floating-point numbers, Proceedings 10th IEEE Symposium on Computer Arithmetic (Jun 1991), doi 10.1109/ARITH.1991.145535
  12. ^ Goldberg, David (March 1991), "What every computer scientist should know about floating-point arithmetic" (PDF), ACM Computing Surveys 23 (1): 5–48, doi:10.1145/103162.103163, http://www.validlab.com/goldberg/paper.pdf 
  13. ^ GNU Compiler Collection manual, version 4.4.3: 3.10 Options That Control Optimization, -fassociative-math (Jan. 21, 2010).
  14. ^ Compaq Fortran User Manual for Tru64 UNIX and Linux Alpha Systems, section 5.9.7 Arithmetic Reordering Optimizations (retrieved March 2010).
  15. ^ Börje Lindh, Application Performance Optimization, Sun BluePrints OnLine (March 2002).
  16. ^ Eric Fleegal, "Microsoft Visual C++ Floating-Point Optimization", Microsoft Visual Studio Technical Articles (June 2004).
  17. ^ Martyn J. Corden, "Consistency of floating-point results using the Intel compiler," Intel technical report (Sep. 18, 2009).
  18. ^ Tom Macdonald, "C for Numerical Computing", Journal of Supercomputing vol. 5, pp. 31–48 (1991).
  19. ^ BLAS Technical Forum, section 2.7 (August 21, 2001).

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • Summation — For evaluation of sums in closed form see evaluating sums. : Summation is also a term used to describe a process in synapse biology. Summation is the addition of a set of numbers; the result is their sum or total . The numbers to be summed may be …   Wikipedia

  • William Kahan — Infobox Scientist name = William Morton Kahan image width = caption = birth date = birth date and age|1933|6|5 birth place = flagicon|CAN Toronto, Ontario death date = death place = residence = citizenship = nationality = Canadian ethnicity =… …   Wikipedia

  • List of numerical analysis topics — This is a list of numerical analysis topics, by Wikipedia page. Contents 1 General 2 Error 3 Elementary and special functions 4 Numerical linear algebra …   Wikipedia

  • Rounding — This article is about numerical rounding. For lip rounding in phonetics, see Labialisation. For other uses, see Rounding (disambiguation). Rounding a numerical value means replacing it by another value that is approximately equal but has a… …   Wikipedia

  • List of algorithms — The following is a list of the algorithms described in Wikipedia. See also the list of data structures, list of algorithm general topics and list of terms relating to algorithms and data structures.If you intend to describe a new algorithm,… …   Wikipedia

  • Список алгоритмов — Эта страница информационный список. Основная статья: Алгоритм Ниже приводится список алгоритмов, группированный по категориям. Более детальные сведения приводятся в списке структур данных и …   Википедия

  • List of mathematics articles (K) — NOTOC K K approximation of k hitting set K ary tree K core K edge connected graph K equivalence K factor error K finite K function K homology K means algorithm K medoids K minimum spanning tree K Poincaré algebra K Poincaré group K set (geometry) …   Wikipedia

  • Floating point — In computing, floating point describes a method of representing real numbers in a way that can support a wide range of values. Numbers are, in general, represented approximately to a fixed number of significant digits and scaled using an exponent …   Wikipedia

  • Decimal floating point — Floating point precisions IEEE 754: 16 bit: Half (binary16) 32 bit: Single (binary32), decimal32 64 bit: Double (binary64), decimal64 128 bit: Quadruple (binary128), decimal128 Other: Minifloat · Extended precision Arbitrary precision… …   Wikipedia

  • Singular value decomposition — Visualization of the SVD of a 2 dimensional, real shearing matrix M. First, we see the unit disc in blue together with the two canonical unit vectors. We then see the action of M, which distorts the disk to an ellipse. The SVD decomposes M into… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”