# Extreme value theorem

﻿
Extreme value theorem
A continuous function ƒ(x) on the closed interval [a,b] showing the absolute max (red) and the absolute min (blue).

In calculus, the extreme value theorem states that if a real-valued function f is continuous in the closed and bounded interval [a,b], then f must attain its maximum and minimum value, each at least once. That is, there exist numbers c and d in [a,b] such that:

$f(c) \ge f(x) \ge f(d)\quad\text{for all }x\in [a,b].\,$

A related theorem is the boundedness theorem which states that a continuous function f in the closed interval [a,b] is bounded on that interval. That is, there exist real numbers m and M such that:

$m \le f(x) \le M\quad\text{for all }x \in [a,b].\,$

The extreme value theorem enriches the boundedness theorem by saying that not only is the function bounded, but it also attains its least upper bound as its maximum and its greatest lower bound as its minimum.

The extreme value theorem is used to prove Rolle's theorem. In a formulation due to Karl Weierstrass, this theorem states that a continuous function from a compact space to a subset of the real numbers attains its maximum and minimum.

## History

The extreme value theorem was originally proved by Bolzano in 1830's in a work Function Theory but the work remained unpublished until 1930. Bolzano's proof consisted of showing that a continuous function on a closed interval was bounded, and then showing that the function attained its maximum and minimum value. Both proofs involved what is known today as the Bolzano–Weierstrass theorem (Rusnock & Kerr-Lawson 2005). The result was also discovered later by Weierstrass in 1860[citation needed].

## Functions to which theorem does not apply

The following examples show why the function domain must be closed and bounded in order for the theorem to apply. Each fails to attain a maximum on the given interval.

1. ƒ(x) = x defined over [0, ∞) is not bounded from above.
2. ƒ(x) = x / (1 + x) defined over [0, ∞) is bounded but does not attain its least upper bound 1.
3. ƒ(x) = 1 / x defined over (0, 1] is not bounded from above.
4. ƒ(x) = 1 – x defined over (0, 1] is bounded but never attains its least upper bound 1.

Defining ƒ(0) = 0 in the last two examples shows that both theorems require continuity on [ab].

## Extension to semi-continuous functions

If the continuity of the function f is weakened to semi-continuity, then the corresponding half of the boundedness theorem and the extreme value theorem hold and the values –∞ or +∞, respectively, from the extended real number line can be allowed as possible values. More precisely:

Theorem: If a function f : [a,b] → [–∞,∞) is upper semi-continuous, meaning that

$\limsup_{y\to x} f(y)\le f(x)\,$

for all x in [a,b], then f is bounded above and attains its supremum.

Proof: If f(x) = –∞ for all x in [a,b], then the supremum is also –∞ and the theorem is true. In all other cases, the proof is a slight modification of the proofs given above. In the proof of the boundedness theorem, the upper semi-continuity of f at x only implies that the limit superior of the subsequence {f(xnk)} is bounded above by f(x) < ∞, but that is enough to obtain the contradiction. In the proof of the extreme value theorem, upper semi-continuity of f at d implies that the limit superior of the subsequence {f(dnk)} is bounded above by f(d), but this suffices to conclude that f(d) = M

Applying this result to −f proves:

Theorem: If a function f : [a,b] → (–∞,∞] is lower semi-continuous, meaning that

$\liminf_{y\to x} f(y)\ge f(x)\,$

for all x in [a,b], then f is bounded below and attains its infimum.

A real-valued function is upper as well as lower semi-continuous, if and only if it is continuous in the usual sense. Hence these two theorems imply the boundedness theorem and the extreme value theorem.

## Topological formulation

In general topology, the extreme value theorem follows from the general fact that compactness is preserved by continuous functions, and the fact that a subset of the real line is compact if and only if it is both closed and bounded.

## Proving the theorems

We look at the proof for the upper bound and the maximum of f. By applying these results to the function –f, the existence of the lower bound and the result for the minimum of f follows. Also note that everything in the proof is done within the context of the real numbers.

We first prove the boundedness theorem, which is a step in the proof of the extreme value theorem. The basic steps involved in the proof of the extreme value theorem are:

1. Prove the boundedness theorem.
2. Find a sequence so that its image converges to the supremum of f.
3. Show that there exists a subsequence that converges to a point in the domain.
4. Use continuity to show that the image of the subsequence converges to the supremum.

### Proof of the boundedness theorem

Suppose the function f is not bounded above on the interval [a,b]. Then, by the Archimedean property of the real numbers, for every natural number n, there exists an xn in [a,b] such that f(xn) > n. This defines a sequence {xn}. Because [a,b] is bounded, the Bolzano-Weierstrass theorem implies that there exists a convergent subsequence {$x_{n_k}$} of {xn}. Denote its limit by x. As [a,b] is closed, it contains x. Because f is continuous at x, we know that {f($x_{n_k}$)} converges to the real number f(x) (as f is sequentially continuous at x.) But f(xnk) > nkk for every k, which implies that {f(xnk)} diverges to +∞, a contradiction. Therefore, f is bounded above on [a,b].

### Proof of the extreme value theorem

By the boundedness theorem, f is bounded from above, hence, by the Dedekind-completeness of the real numbers, the least upper bound (supremum) M of f exists. It is necessary to find a d in [a,b] such that M = f(d). Let n be a natural number. As M is the least upper bound, M – 1/n is not an upper bound for f. Therefore, there exists dn in [a,b] so that M – 1/n < f(dn). This defines a sequence {dn}. Since M is an upper bound for f, we have M – 1/n < f(dn) ≤ M for all n. Therefore, the sequence {f(dn)} converges to M.

The Bolzano-Weierstrass theorem tells us that there exists a subsequence {$d_{n_k}$}, which converges to some d and, as [a,b] is closed, d is in [a,b]. Since f is continuous at d, the sequence {f($d_{n_k}$)} converges to f(d). But {f(dnk)} is a subsequence of {f(dn)} that converges to M, so M = f(d). Therefore, f attains its supremum M at d

### Alternative proof of the extreme value theorem

The set {yR : y = f(x) for some x ∈ [a,b]} is a bounded set. Hence, its least upper bound exists by least upper bound property of the real numbers. Let M = sup(f(x)) on [ab]. If there is no point x on [ab] so that f(x) = M then f(x) < M on [ab]. Therefore 1/(M − f(x)) is continuous on [a, b].

However, to every positive number ε, there is always some x in [ab] such that M − f(x) < ε because M is the least upper bound. Hence, 1/(M − f(x)) > 1/ε, which means that 1/(M − f(x)) is not bounded. Since every continuous function on a [a, b] is bounded, this contradicts the conclusion that 1/(M − f(x)) was continuous on [ab]. Therefore there must be a point x in [ab] such that f(x) = M.

### Proof using the hyperreals

In the setting of non-standard calculus, let N  be an infinite hyperinteger. The interval [0, 1] has a natural hyperreal extension. Consider its partition into N subintervals of equal infinitesimal length 1/N, with partition points xi = i /N as i "runs" from 0 to N. The function ƒ  is also naturally extended to a function ƒ* defined on the hyperreals between 0 and 1. Note that in the standard setting (when N  is finite), a point with the maximal value of ƒ can always be chosen among the N+1 points xi, by induction. Hence, by the transfer principle, there is a hyperinteger i0 such that 0 ≤ i0 ≤ N and $f^*(x_{i_0})\geq f^*(x_i)$  for all i = 0, …, N. Consider the real point

$c= {\rm st}(x_{i_0})$

where st is the standard part function. An arbitrary real point x lies in a suitable sub-interval of the partition, namely $x\in [x_i,x_{i+1}]$, so that  st(xi) = x. Applying st to the inequality $f^*(x_{i_0})\geq f^*(x_i)$, we obtain ${\rm st}(f(x_{i_0}))\geq {\rm st}(f(x_i))$. By continuity of ƒ  we have

${\rm st}(f^*(x_{i_0}))= f({\rm st} (x_{i_0}))=f(c)$.

Hence ƒ(c) ≥ ƒ(x), for all x, proving c to be a maximum of ƒ. See Keisler (1986, p. 164).

## References

Wikimedia Foundation. 2010.

### Look at other dictionaries:

• Extreme - получить на Академике действующий промокод IntimShop или выгодно extreme купить со скидкой на распродаже в IntimShop

• Extreme value — The largest and the smallest element of a set are called extreme values, absolute extrema, or extreme records.For a differentiable function f, if f(x 0) is an extreme value for the set of all values f(x), and if x 0 is in the interior of the… …   Wikipedia

• Extreme value theory — is a branch of statistics dealing with the extreme deviations from the median of probability distributions. The general theory sets out to assess the type of probability distributions generated by processes. Extreme value theory is important for… …   Wikipedia

• Mean value theorem — For the theorem in harmonic function theory, see Harmonic function#Mean value property. Topics in Calculus Fundamental theorem Limits of functions Continuity Mean value theorem Differential calculus  Derivative Change of variables …   Wikipedia

• Generalized extreme value distribution — Probability distribution name =Generalized extreme value type =density pdf cdf parameters =mu in [ infty,infty] , location (real) sigma in (0,infty] , scale (real) xiin [ infty,infty] , shape (real) support =x>mu sigma/xi,;(xi > 0) x …   Wikipedia

• Rolle's theorem — In calculus, a branch of mathematics, Rolle s theorem essentially states that a differentiable function, which attains equal values at two points, must have a stationary point somewhere between them.tandard version of the theoremIf a real valued… …   Wikipedia

• Singular value decomposition — Visualization of the SVD of a 2 dimensional, real shearing matrix M. First, we see the unit disc in blue together with the two canonical unit vectors. We then see the action of M, which distorts the disk to an ellipse. The SVD decomposes M into… …   Wikipedia

• Darboux's theorem (analysis) — Darboux s theorem is a theorem in real analysis, named after Jean Gaston Darboux. It states that all functions that result from the differentiation of other functions have the intermediate value property: the image of an interval is also an… …   Wikipedia

• Weierstrass theorem — Several theorems are named after Karl Weierstrass. These include: *The Weierstrass approximation theorem, also known as the Stone Weierstrauss theorem *The Bolzano Weierstrass theorem, which ensures compactness of closed and bounded sets in R n… …   Wikipedia

• Maximum theorem — The maximum theorem provides conditions for the continuity of an optimized function and the set of its maximizers as a parameter changes. The statement was first proven by Claude Berge in 1959[1]. The theorem is primarily used in mathematical… …   Wikipedia

• Inverse function theorem — In mathematics, specifically differential calculus, the inverse function theorem gives sufficient conditions for a function to be invertible in a neighborhood of a point in its domain. The theorem also gives a formula for the derivative of the… …   Wikipedia