Nuclear chain reaction

Nuclear chain reaction
A possible nuclear fission chain reaction. 1. A uranium-235 atom absorbs a neutron, and fissions into two new atoms (fission fragments), releasing three new neutrons and a large amount of binding energy. 2. One of those neutrons is absorbed by an atom of uranium-238, and does not continue the reaction. Another neutron leaves the system without being absorbed. However, one neutron does collide with an atom of uranium-235, which then fissions and releases two neutrons and more binding energy. 3. Both of those neutrons collide with uranium-235 atoms, each of which fissions and releases a few neutrons, which can then continue the reaction.

A nuclear chain reaction occurs when one nuclear reaction causes an average of one or more nuclear reactions, thus leading to a self-propagating number of these reactions. The specific nuclear reaction may be the fission of heavy isotopes (e.g. 235U) or the fusion of light isotopes (e.g. 2H and 3H). The nuclear chain reaction releases several million times more energy per reaction than any chemical reaction.

Contents

History

Chemical chain reactions were first proposed by German chemist Max Bodenstein in 1913, and reasonably well understood before nuclear chain reactions were proposed.[1] It was understood that chemical chain reactions were responsible for exponentially increasing rates in reactions, such as produced chemical explosions.

The concept of a nuclear chain reaction was first hypothesized by Hungarian scientist Leó Szilárd on August 12, 1933. The neutron had been discovered in 1932, shortly before. Szilard realized that if a nuclear reaction produced neutrons, which then caused further nuclear reactions, the process might be self-perpetuating. Szilárd, however, did not propose fission as the mechanism for his chain reaction, since the fission reaction was not yet discovered or even suspected. Instead, Szilard proposed using mixtures of lighter known isotopes which produced neutrons in copious amounts. He filed a patent for his idea of a simple nuclear reactor the following year.[2]

In 1936, Szilárd attempted to create a chain reaction using beryllium and indium, but was unsuccessful. After nuclear fission was discovered by others in 1938, Szilárd and Enrico Fermi in 1939 searched for, and discovered, neutron multiplication in uranium, proving that a nuclear chain reaction by this mechanism was indeed possible.[3] This discovery prompted the letter from Albert Einstein to President Franklin D. Roosevelt warning of the possibility that Nazi Germany might be attempting to build an atomic bomb.[4][5]

Enrico Fermi created the first artificial self-sustaining nuclear chain reaction, called Chicago Pile-1 (CP-1), in a racquets court below the bleachers of Stagg Field at the University of Chicago on December 2, 1942. Fermi's experiments at the University of Chicago were part of Arthur H. Compton's Metallurgical Laboratory facility, which was part of the Manhattan Project.

In 1956, Paul Kuroda of the University of Arkansas postulated that a natural fission reactor may have once existed. Since nuclear chain reactions only require natural materials (such as water and uranium), it is possible to have these chain reactions occur where there is the right combination of materials within the Earth's crust. Kuroda's prediction was verified with the discovery of evidence of natural self-sustaining nuclear chain reactions in the past at Oklo in Gabon, Africa in September 1972.[6]

Fission chain reaction

Fission chain reactions occur because of interactions between neutrons and fissile isotopes (such as 235U). The chain reaction requires both the release of neutrons from fissile isotopes undergoing nuclear fission and the subsequent absorption of some of these neutrons in fissile isotopes. When an atom undergoes nuclear fission, a few neutrons (the exact number depends on several factors) are ejected from the reaction. These free neutrons will then interact with the surrounding medium, and if more fissile fuel is present, some may be absorbed and cause more fissions. Thus, the cycle repeats to give a reaction that is self-sustaining.

Nuclear power plants operate by precisely controlling the rate at which nuclear reactions occur, and that control is maintained through the use of several redundant layers of safety measures. Moreover, the materials in a nuclear reactor core and the uranium enrichment level make a nuclear explosion impossible, even if all safety measures failed. On the other hand, nuclear weapons are specifically engineered to produce a reaction that is so fast and intense it cannot be controlled after it has started. When properly designed, this uncontrolled reaction can lead to an explosive energy release.

Nuclear fission fuel

Nuclear fission weapons must use an extremely high quality, highly-enriched fuel exceeding the critical size and geometry (critical mass) in order to obtain an explosive chain reaction. The fuel for a nuclear fission reactor is very different, usually consisting of a low-enriched oxide material (e.g. UO2).

Fission reaction products

When a heavy atom undergoes nuclear fission it breaks into two or more fission fragments. Also, several free neutrons, gamma rays, and neutrinos are emitted, and a large amount of energy is released. The sum of the rest masses of the fission fragments and ejected neutrons is less than the sum of the rest masses of the original atom and incident neutron (of course the fission fragments are not at rest). The mass difference is accounted for in the release of energy according to the equation E=Δmc²:

mass of released energy = \frac{E}{c^2} = m_\mbox{original}-m_\mbox{final}

Due to the extremely large value of the speed of light, c, a small decrease in mass is associated with a tremendous release of active energy (for example, the kinetic energy of the fission fragments). This energy (in the form of radiation and heat) carries the missing mass, when it leaves the reaction system (total mass, like total energy, is always conserved). While typical chemical reactions release energies on the order of a few eVs (e.g. the binding energy of the electron to hydrogen is 13.6 eV), nuclear fission reactions typically release energies on the order of hundreds of millions of eVs.

Two typical fission reactions are shown below with average values of energy released and number of neutrons ejected:

{}^{235}U + \mbox{neutron} \rightarrow \mbox{fission fragments} + 2.4\mbox{ neutrons} + 192.9\mbox{ MeV}[7]
{}^{239}Pu + \mbox{neutron} \rightarrow \mbox{fission fragments} + 2.9\mbox{ neutrons} + 198.5\mbox{ MeV}[7]

Note that these equations are for fissions caused by slow-moving (thermal) neutrons. The average energy released and number of neutrons ejected is a function of the incident neutron speed.[7] Also, note that these equations exclude energy from neutrinos since these subatomic particles are extremely non-reactive and, therefore, rarely deposit their energy in the system.

Timescales of nuclear chain reactions

Prompt neutron lifetime

The prompt neutron lifetime, l, is the average time between the emission of neutrons and either their absorption in the system or their escape from the system.[8] The term lifetime is used because the emission of a neutron is often considered its "birth," and the subsequent absorption is considered its "death." For thermal (slow-neutron) fission reactors, the typical prompt neutron lifetime is on the order of 10−4 seconds, and for fast fission reactors, the prompt neutron lifetime is on the order of 10−7 seconds.[7] These extremely short lifetimes mean that in 1 second, 10,000 to 10,000,000 neutron lifetimes can pass. The average (also referred to as the adjoint unweighted) prompt neutron lifetime takes into account all prompt neutrons regardless of their importance in the reactor core; the effective prompt neutron lifetime (referred to as the adjoint weighted over space, energy, and angle) refers to a neutron with average importance.[9]

Mean generation time

The mean generation time, Λ, is the average time from a neutron emission to a capture that results in fission.[7] The mean generation time is different from the prompt neutron lifetime because the mean generation time only includes neutron absorptions that lead to fission reactions (not other absorption reactions). The two times are related by the following formula:

\Lambda = \frac{l}{k}

In this formula, k is the effective neutron multiplication factor, described below.

Effective neutron multiplication factor

The effective neutron multiplication factor, k, is the average number of neutrons from one fission that cause another fission. The remaining neutrons either are absorbed in non-fission reactions or leave the system without being absorbed. The value of k determines how a nuclear chain reaction proceeds:

  • k < 1 (subcriticality): The system cannot sustain a chain reaction, and any beginning of a chain reaction dies out over time. For every fission that is induced in the system, an average total of 1/(1 − k) fissions occur.
  • k = 1 (criticality): Every fission causes an average of one more fission, leading to a fission (and power) level that is constant. Nuclear power plants operate with k = 1 unless the power level is being increased or decreased.
  • k > 1 (supercriticality): For every fission in the material, it is likely that there will be "k" fissions after the next mean generation time. The result is that the number of fission reactions increases exponentially, according to the equation e(k − 1)t / Λ, where t is the elapsed time. Nuclear weapons are designed to operate under this state. There are two subdivisions of supercriticality: prompt and delayed.

When describing kinetics and dynamics of nuclear reactors and also in the practice of reactor operation is used the concept of Reactivity (nuclear), which characterizes the deflection of reactor from the critical state. ρ=(k-1)/k.

In a nuclear reactor, k will actually oscillate from slightly less than 1 to slightly more than 1, due primarily to thermal effects (as more power is produced, the fuel rods warm and thus expand, lowering their capture ratio, and thus driving k lower). This leaves the average value of k at exactly 1. Delayed neutrons play an important role in the timing of these oscillations.

In an infinite medium, the multiplication factor may be described by the four factor formula; in a non-infinite medium, the multiplication factor may be described by the six factor formula.

Prompt and delayed supercriticality

Not all neutrons are emitted as a direct product of fission; some are instead due to the radioactive decay of some of the fission fragments. The neutrons that occur directly from fission are called "prompt neutrons," and the ones that are a result of radioactive decay of fission fragments are called "delayed neutrons." The fraction of neutrons that are delayed is called β, and this fraction is typically less than 1% of all the neutrons in the chain reaction.[7]

The delayed neutrons allow a nuclear reactor to respond several orders of magnitude more slowly than just prompt neutrons would alone.[8] Without delayed neutrons, changes in reaction rates in nuclear reactors would occur at speeds that are too fast for humans to control.

The region of supercriticality between k = 1 and k = 1/(1-β) is known as delayed supercriticality (or delayed criticality). It is in this region that all nuclear power reactors operate. The region of supercriticality for k > 1/(1-β) is known as prompt supercriticality (or prompt criticality), which is the region in which nuclear weapons operate.

The change in k needed to go from critical to prompt critical is defined as a dollar[10]

Neutron multiplication in nuclear weapons

Nuclear fission weapons require a mass of fissile fuel that is prompt supercritical.

For a given mass of fissile material the value of k can be increased by increasing the density. Since the probability per distance traveled for a neutron to collide with a nucleus is proportional to the material density, increasing the density of a fissile material can increase k. This concept is utilized in the implosion method for nuclear weapons. In these devices, the nuclear chain reaction begins after increasing the density of the fissile material with a conventional explosive.

In the gun-type fission weapon two subcritical pieces of fuel are rapidly brought together. The value of k for a combination of two masses is always greater than that of its components. The magnitude of the difference depends on distance, as well as the physical orientation.

The value of k can also be increased by using a neutron reflector surrounding the fissile material

Once the mass of fuel is prompt supercritical, the power increases exponentially. However, the exponential power increase cannot continue for long since k decreases when the amount of fission material that is left decreases (i.e. it is consumed by fissions). Also, the geometry and density are expected to change during detonation since the remaining fission material is torn apart from the explosion.

Predetonation

Detonation of a nuclear weapon involves bringing fissile material into its optimal supercritical state very rapidly. During part of this process, the assembly is supercritical, but not yet in an optimal state for a chain reaction. Free neutrons, in particular from spontaneous fissions, can cause the device to undergo a preliminary chain reaction that destroys the fissile material before it is ready to produce a large explosion, which is known as predetonation. To keep the probability of predetonation low, the duration of the non-optimal assembly period is minimized and fissile and other materials are used which have low spontaneous fission rates. In fact, the combination of materials has to be such that it is unlikely that there is even a single spontaneous fission during the period of supercritical assembly. In particular, the gun method cannot be used with plutonium (see nuclear weapon design).

Uncontrolled chain reactions and explosions in nuclear power plants

It is impossible for a nuclear power plant to undergo a nuclear chain reaction that results in an explosion of power comparable with a nuclear weapon, but even low-powered explosions due to uncontrolled chain reactions, that would be considered "fizzles" in a bomb, may still cause considerable damage and meltdown in a reactor. For example, the Chernobyl disaster involved a runnaway chain reaction but the result was a low-powered steam explosion from the relatively small release of heat, as compared with a bomb. However, the reactor complex was destroyed by the heat, as well as by ordinary burning of the graphite exposed to air.[8] Such steam explosions would be typical of the very diffuse assembly of materials in a nuclear reactor, even under the worst conditions.

In addition, other steps can be taken for safety. For example, power plants licensed in the United States require a negative void coefficient of reactivity (this means that if water is removed from the reactor core, the nuclear reaction will tend to shut down, not increase). This eliminates the possibility of the type of accident that occurred at Chernobyl (which was due to a positive void coefficient). However, nuclear reactors are still capable of causing smaller explosions even after complete shutdown, such as was the case of the Fukushima Daiichi nuclear disaster. In such cases, residual decay heat from the core may cause high temperatures if there is loss of loss of coolant flow, even a day after the chain reaction has been shut down (see SCRAM). This may cause a chemical reaction between water and fuel that produces hydrogen gas which can explode after mixing with air, with severe contamination consequences, since fuel rod material may still be exposed to the atmosphere from this process. However, such explosions do not happen during a chain reaction, but rather as a result of energy from radioactive beta decay, after the fission chain reaction has been stopped.

Fusion chain reaction

In a more generalized sense, a nuclear fusion reaction can be considered a nuclear chain reaction: it occurs under extreme pressure and temperature conditions, which are maintained by the energy released in the fusion process.

See also

References

  1. ^ See this 1956 Nobel lecture for history of the chain reaction in chemistry
  2. ^ L. Szilárd, "Improvements in or relating to the transmutation of chemical elements," British patent number: GB630726 (filed: 28 June 1934; published: 30 March 1936). esp@cenet document view
  3. ^ H. L. Anderson, E. Fermi, and Leo Szilárd, "Neutron production and absorption in uranium," The Physical Review, vol. 56, pages 284–286 (1 August 1939). Available on-line at FDRlibrary.marist.edu
  4. ^ AIP.org
  5. ^ Atomicarchive.com
  6. ^ Oklo: Natural Nuclear Reactors—Fact Sheet
  7. ^ a b c d e f Duderstadt, James; Hamilton, Louis (1976). Nuclear Reactor Analysis. John Wiley & Sons, Inc. ISBN 0-471-22363-8. 
  8. ^ a b c Lamarsh, John; Baratta, Anthony (2001). Introduction to Nuclear Engineering. Prentice Hall. ISBN 0-201-82498-1. 
  9. ^ Deterministic and Monte Carlo Analyses of YALINA Thermal Subcritical Assembly
  10. ^ Sizes.com

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • nuclear chain reaction — grandininė branduolinė reakcija statusas T sritis fizika atitikmenys: angl. nuclear chain reaction vok. Kettenkernreaktion, f rus. цепная ядерная реакция, f pranc. réaction en chaîne nucléaire, f; réaction nucléaire en chaîne, f …   Fizikos terminų žodynas

  • Chain reaction — This article is about chain reactions in chemistry and physics. For other uses, see Chain reaction (disambiguation). A chain reaction is a sequence of reactions where a reactive product or by product causes additional reactions to take place. In… …   Wikipedia

  • Chain reaction (disambiguation) — A chain reaction is a type of chemical or nuclear reaction in which the formation of one product leads directly to another or series of any events where each one is triggered by the previous event. Chain reaction or The Chain reaction may also… …   Wikipedia

  • chain reaction — chain re action n 1.) technical a chemical or ↑nuclear reaction which produces energy and causes more reactions of the same kind 2.) a series of related events, each of which causes the next ▪ A sudden drop on Wall Street can set off a chain… …   Dictionary of contemporary English

  • chain reaction — n a self sustaining chemical or nuclear reaction yielding energy or products that cause further reactions of the same kind …   Medical dictionary

  • chain reaction — n. 1. a self sustaining series of chemical or nuclear reactions in which the products of the reaction contribute directly to the process: it can be started by light, an electric spark, bombardment with neutrons, etc. 2. any sequence of events,… …   English World dictionary

  • chain reaction — 1. Physics. a self sustaining reaction in which the fission of nuclei of one generation of nuclei produces particles that cause the fission of at least an equal number of nuclei of the succeeding generation. 2. Chem. a reaction that results in a… …   Universalium

  • nuclear fission chain reaction — grandininė branduolinė reakcija statusas T sritis Energetika apibrėžtis Branduolių dalijimosi reakcija, kurią sukelia neutronai, susidarę ankstesnio dalijimosi metu. atitikmenys: angl. nuclear fission chain reaction vok. nukleare Kettenreaktion,… …   Aiškinamasis šiluminės ir branduolinės technikos terminų žodynas

  • chain reaction — noun a) A nuclear reaction in which particles produced by the fission of one atom trigger fissions of other atoms. The Manhattan Project produced the first recorded controlled chain reaction. b) A series of events, each one causing the next. The… …   Wiktionary

  • chain reaction — /tʃeɪn riˈækʃən/ (say chayn ree akshuhn) noun 1. Physics a nuclear reaction which produces enough neutrons to sustain itself. 2. Chemistry a reaction which results in a product necessary for the continuance of the reaction. 3. a series of… …  

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”