Organofluorine chemistry

Organofluorine chemistry
Some important organofluorine compounds.
A: fluoromethane
B: isoflurane
C: a CFC
D: an HFC
E: triflic acid
F: Teflon
G: PFOS
H: fluorouracil
I: fluoxetine

Organofluorine chemistry describes the chemistry of organofluorine compounds, organic compounds that contain the carbon–fluorine bond. Organofluorine compounds find diverse applications ranging from oil- and water-repellents to pharmaceuticals, refrigerants and reagents in catalysis. In addition to these applications, some organofluorine compounds are pollutants because of contributions to ozone depletion, global warming, bioaccumulation, and toxicity. The area of organofluorine chemistry often requires special techniques associated with the handling of fluorinating agents.

Contents

The carbon–fluorine bond

Fluorine has several distinctive differences from all other substituents encountered in organic molecules. As a result, the physical and chemical properties of organofluorines can be distinctive in comparison to other organohalogens.

  1. The carbon–fluorine bond is one of the strongest in organic chemistry (an average bond energy around 480 kJ/mol[1]). This is significantly stronger than the bonds of carbon with other halogens (an average bond energy of e.g. C-Cl bond is around 320 kJ/mol[1]) and is one of the reasons why fluoroorganic compounds have high thermal and chemical stability.
  2. The carbon–fluorine bond is relatively short (around 1.4 Å[1]).
  3. The Van der Waals radius of the fluorine substituent is only 1.47 Å[1], which is shorter than in any other substituent and is close to that of hydrogen (1.2 Å). This, together with the short bond length, is the reason why there is no steric strain in polyfluorinated compounds. This is another reason for their high thermal stability. In addition, the fluorine substituents in polyfluorinated compounds efficiently shield the carbon skeleton from possible attacking reagents. This is another reason for the high chemical stability of polyfluorinated compounds.
  4. Fluorine has the highest electronegativity of all elements: 3.98[1]. This causes the high dipole moment of C-F bond (1.41 D[1]).
  5. Fluorine has the lowest polarizability of all atoms: 0.56 10-24 cm3.[1] This causes very weak dispersion forces between polyfluorinated molecules and is the reason for the often-observed boiling point reduction on fluorination as well as for the simultaneous hydrophobicity and lipophobicity of polyfluorinated compounds whereas other perhalogenated compounds are more lipophilic.

In comparison to aryl chlorides and bromides, aryl fluorides form Grignard reagents only reluctantly. On the other hand, aryl fluorides, e.g. fluoroanilines and fluorophenols, often undergo nucleophilic substitution efficiently.

Types of organofluorine compounds

Hydrofluorocarbons

Hydrofluorocarbons, organic compounds that contain only one or a few fluorine atoms, are the more common type of organofluorine compounds. Used as refrigerants in place of the older chlorofluorocarbons such as Freon-12, they do not harm the ozone layer if they do not contain chlorine or bromine. However, their atmospheric concentrations are rapidly increasing, causing international concern about a different process: their rising contribution to anthropogenic radiative forcing emissions (i.e., greenhouse gas global warming).

Fluorocarbons with few C-F bonds behave similarly to the parent hydrocarbons, but their reactivity can be altered significantly. For example, both uracil and 5-fluorouracil are colourless, high-melting crystalline solids, but the latter is a potent anti-cancer drug. The use of the C-F bond in pharmaceuticals is predicated on this altered reactivity.[2] Several drugs and agrochemicals contain only one fluorine center or one trifluoromethyl group.

Fluorocarbons and fluorocarbon derivatives

Fluorocarbon based molecules are more chemically and thermally stable than hydrocarbons, reflecting the relative inertness of the C-F bond. They are also relatively lipophobic. Because of the reduced intermolecular van der Waals interactions, fluorocarbon-based compounds are often lubricants or are highly volatile. Gas soluble fluorocarbon liquids have medical applications. Fully fluorinated organic compounds, sometimes called perfluorocarbons or fluorocarbons, contain only carbon and fluorine. Chlorofluorocarbons (CFCs) are typically highly fluorinated.

Fluoropolymers

Polymeric organofluorine compounds are numerous and commercially significant. They range from fully fluorinated species, e.g. PTFE to partially fluorinated, e.g. polyvinylidene fluoride ([CH2CF2]n) and polychlorotrifluoroethylene ([CFClCF2]n.

The structure of organofluorine compounds can be distinctive, again reflecting the polarizing character of the C-F bond. Fluorination affects packing of organofluorine molecules with hydrocarbons. As shown below, perfluorinated aliphatic compounds tend to segregate from hydrocarbons. This "like dissolves like effect" is related to the usefulness of fluorous phases and the use of PFOA in processing of fluoropolymers. In contrast to the aliphatic derivatives, perfluoroaromatic derivatives tend to form mixed phases with nonfluorinated aromatic compounds, resulting from donor-acceptor interactions between the pi-systems.

Segregation of alkyl and perfluoroalkyl substituents.[3]
Packing in a crystal pentafluorotolan (C6F5CCC6H5), illustrating the donor-acceptor interactions between the fluorinated and nonfluorinated rings.[4]

Fluorocarbenes

As indicated throughout this article, fluorine-substituents lead to reactivity that differs strongly from classical organic chemistry. The premier example is difluorocarbene, CF2, which is a singlet whereas carbene (CH2) has a triplet ground state.[5] This difference is significant because difluorocarbene is a precursor to tetrafluoroethylene.

Methods for preparation of C-F bonds

Organofluorine compounds are prepared by numerous routes, depending on the degree and regiochemistry of fluorination sought and the nature of the precursors. The direct fluorination of hydrocarbons with F2, often diluted with N2, is useful for highly fluorinated compounds:

R3CH + F2R3CF + HF

Such reactions however are often unselective and require care because hydrocarbons can uncontrollably "burn" in F2, analogous to the combustion of hydrocarbon in O2. For this reason, alternative fluorination methodologies have been developed. Generally, such methods are classified into two classes.

Electrophilic fluorination

Electrophilic fluorination rely on sources of "F+". Often such reagents feature N-F bonds, for example F-TEDA-BF4. Asymmetric fluorination, whereby only one of two possible enantiomeric products are generated from a prochiral substrate, rely on electrophilic fluorination reagents.[6] Illustrative of this approach is the preparation of a precursor to anti-inflammatory agents:[7]

SelectfluorRxn.png

Electrosynthetic methods

A specialized but important method of electrophilic fluorination involves electrosynthesis. The method is mainly used to perfluorinate, i.e. replace all C–H bonds by C–F bonds. The hydrocarbon is dissolved or suspended in liquid HF, and the mixture is electrolyzed at 5–6 V using Ni anodes.[8] The method was first demonstrated with the preparation of perfluoropyridine (C5F5N) from pyridine (C5H5N). Several variations of this technique have been described, including the use of molten potassium bifluoride or organic solvents.

Nucleophilic fluorination

The major alternative to electrophilic fluorination is, naturally, nucleophilic fluorination using reagents that are sources of "F-," for Nucleophilic displacement typically of chloride and bromide. Metathesis reactions employing alkali metal fluorides are the simplest.[9]

R3CCl + MFR3CF + MCl (M = Na, K, Cs)

The decomposition of aryldiazonium tetrafluoroborates in the Sandmeyer[10] or Schiemann reactions exploit fluoroborates as F- sources.

ArN2BF4ArF + N2 + BF3

Although hydrogen fluoride may appear to be an unlikely nucleophile, it is the most common source of fluoride in the synthesis of organofluorine compounds. Such reactions are often catalysed by metal fluorides such as chromium trifluoride. 1,1,1,2-Tetrafluoroethane, a replacement for CFC’s, is prepared industrially using this approach:[11]

Cl2C=CClH + 4 HF → F3CCFH2 + 3 HCl

Notice that this transformation entails two reaction types, metathesis (replacement of Cl- by F-) and hydrofluorination of an alkene.

Deoxofluorination

Deoxofluorination agents effect the replacement hydroxyl and carbonyl groups with one and two fluorides, respectively. One such reagent, useful for fluoride for oxide exchange in carbonyl compounds, is sulfur tetrafluoride:

RCO2H + SF4 → RCF3 + SO2 + HF

Alternates to SF4 include the diethylaminosulfur trifluoride (DAST, NEt2SF3) and bis(2-methoxyethyl)aminosulfur trifluoride (deoxo-fluor). These organic reagents are easier to handle and more selective:[12]

bis(2-methoxyethyl)aminosulfur trifluoride reaction

From fluorinated building blocks

Many organofluorine compounds are generated from reagents that deliver perfluoroalkyl and perfluoroaryl groups. (Trifluoromethyl)trimethylsilane, CF3Si(CH3)3, is used as a source of the trifluoromethyl group, for example.[13] Among the available fluorinated building blocks are CF3X (X = Br, I), C6F5Br, and C3F7I. These species form Grignard reagents that then can be treated with a variety of electrophiles. The development of fluorous technologies (see below, under solvents) is leading to the development of reagents for the introduction of "fluorous tails."

A special but significant application of the fluorinated building block approach is the synthesis of tetrafluoroethylene, which is produced on a large-scale industrially via the intermediacy of difluorocarbene. The process begins with the thermal (600-800 °C) dehydrochlorination of chlorodifluoromethane:[2]

CHClF2 → CF2 + HCl
2 CF2 → C2F4

Sodium fluorodichloroacetate (CAS# 2837-90-3) is used to generate chlorofluorocarbene, for cyclopropanations.

18F-Delivery methods

The usefulness of fluorine-containing radiopharmaceuticals in 18F-positron emission tomography has motivated the development of new methods for forming C-F bonds. Because of the short half-life of 18F, these syntheses must be highly efficient, rapid, and easy.[14] Illustrative of the methods is the preparation of fluoride-modified glucose by displacement of a triflate by a labeled fluoride nucleophile:

FDGprep.png

Applications

Organofluorine chemistry impacts many areas of everyday life and technology. The C-F bond is found in pharmaceuticals, agrichemicals, fluoropolymers, refrigerants, surfactants, anesthetics, oil-repellents, catalysis, and water-repellents, among others.

Pharmaceuticals and agrochemicals

The carbon-fluorine bond is commonly found in pharmaceuticals and agrochemicals because it is generally metabolically stable and fluorine acts as a bioisostere of the hydrogen atom. An estimated one fifth of pharmaceuticals contain fluorine, including several of the top drugs.[15] Examples include 5-fluorouracil, flunitrazepam (Rohypnol), fluoxetine (Prozac), paroxetine (Paxil), ciprofloxacin (Cipro), mefloquine, and fluconazole. Fluorine-substituted ethers are volatile anesthetics, including the commercial products methoxyflurane, enflurane, isoflurane, sevoflurane and desflurane. Fluorocarbon anesthetics reduce the hazard of flammability with diethyl ether and cyclopropane. Perfluorinated alkanes are used as blood substitutes.

Fluorosurfactants

Fluorosurfactants, which have a polyfluorinated "tail" and a hydrophilic "head", serve surfactants because they concentrate at the liquid-air interface due to their lipophobicity. Fluorosurfactants have low surface energies and dramatically lower surface tension. The fluorosurfactants perfluorooctanesulfonic acid (PFOS) and perfluorooctanoic acid (PFOA) are two of the most studied because of their ubiquity, toxicity, and long residence times in humans and wildlife.

Solvents

Fluorinated compounds often display distinct solubility properties. Dichlorodifluoromethane and chlorodifluoromethane were widely used refrigerants. CFCs have potent ozone depletion potential due to the homolytic cleavage of the carbon-chlorine bonds; their use is largely prohibited by the Montreal Protocol. Hydrofluorocarbons (HFCs), such as tetrafluoroethane, serve as CFC replacements because they do not catalyze ozone depletion. Oxygen exhibits a high solubility in perfluorocarbon compounds, reflecting again on their lipophilicity. Perfluorodecalin has been demonstrated as a blood substitutes, transporting oxygen to the lungs.

The solvent 1,1,1,2-tetrafluoroethane has been used for extraction of natural products such as taxol, evening primrose oil, and vanillin. 2,2,2-trifluoroethanol is an oxidation-resistant polar solvent.[16]

Organofluorine reagents

The development of organofluorine chemistry has contributed many reagents of value beyond organofluorine chemistry. Triflic acid (CF3SO3H) and trifluoroacetic acid (CF3CO2H) are useful throughout organic synthesis. Their strong acidity is attributed to the electronegativity of the trifluoromethyl group that stabilizes the negative charge. The triflate-group (the conjugate base of the triflic acid) is a good leaving group in substitution reactions.

Fluorous phases

Of topical interest in the area of "Green Chemistry,"[17] highly fluorinated substituents, e.g. perfluorohexyl (C6F13) confer distinctive solubility properties to molecules, which facilitates purification of products in organic synthesis.[18] This area, described as "fluorous chemistry," exploits the concept of like-dissolves-like in the sense that fluorine-rich compounds dissolve preferentially in fluorine-rich solvents. Because of the relative inertness of the C-F bond, such fluorous phases are compatible with even harsh reagents. This theme has spawned techniques of “fluorous tagging’’ and ‘‘fluorous protection’’. Illustrative of fluorous technology is the use of fluoroalkyl-substituted tin hydrides for reductions, the products being easily separated from the spent tin reagent by extraction using fluorinated solvents.[19]

Hydrophobic fluorinated ionic liquids, such as organic salts of bistriflimide or hexafluorophosphate, can form phases that are insoluble in both water and organic solvents, producing multiphasic liquids.

Organofluorine ligands in transition metal chemistry

Organofluorine ligands have long been featured in organometallic and coordination chemistry. One advantage to F-containing ligands is the convenience of 19F NMR spectroscopy for monitoring reactions. The organofluorine compounds can serve as a "sigma-donor ligand," as illustrated by the titanium(III) derivative [(C5Me5)2Ti(FC6H5)]BPh4. Most often, however, fluorocarbon substituents are used to enhance the Lewis acidity of metal centers. A premier example is “Eufod,” a coordination complex of europium(III) that features a perfluoroheptyl modified acetylacetonate ligand. This and related species are useful in organic synthesis and as "shift reagents" in NMR spectroscopy.

Structure of [(C5Me5)2Ti(FC6H5)]+, a coordination complex of an organofluorine ligand.

In an area where coordination chemistry and materials science overlap, the fluorination of organic ligands is used to tune the properties of component molecules. For example, the degree and regiochemistry of fluorination of metalated 2-phenylpyridine ligands in platinum(II) complexes significantly modifies the emission properties of the complexes.[20]

The coordination chemistry of organofluorine ligands also embraces fluorous technologies. For example, triphenylphosphine has been modified by attachment of perfluoroalkyl substituents that confer solubility in perfluorohexane as well as supercritical carbon dioxide. As a specific example, [(C8F17C3H6-4-C6H4)3P.[21]

C-F bond activation

An active area of organometallic chemistry encompasses the scission of C-F bonds by transition metal-based reagents. Both stoichiometric and catalytic reactions have been developed and are of interest from the perspectives of organic synthesis and remediation of xenochemicals.[22] C-F bond activation has been classified as follows “(i) oxidative addition of fluorocarbon, (ii) M–C bond formation with HF elimination, (iii) M–C bond formation with fluorosilane elimination, (iv) hydrodefluorination of fluorocarbon with M–F bond formation, (v) nucleophilic attack on fluorocarbon, and (vi) defluorination of fluorocarbon.” An illustrative metal-mediated C-F activation reaction is the defluorination of fluorohexane by a zirconium dihydride, an analogue of Schwartz's reagent:

(C5Me5)2ZrH2 + 1-FC6H13 → (C5Me5)2ZrH(F) + C6H14

Fluorocarbon anions in Ziegler-Natta catalysis

Fluorine-containing compounds are often featured in noncoordinating or weakly coordinating anions. Both tetrakis(pentafluorophenyl)borate, B(C6F5)4-, and the related tetrakis(3,5-bis(trifluoromethyl)phenyl)borate, are useful in Ziegler-Natta catalysis and related alkene polymerization methodologies. The fluorinated substituents render the anions weakly basic and enhance the solubility in weakly basic solvents, which are compatible with strong Lewis acids.

Materials science

Organofluorine compounds enjoy many niche applications in materials science. With a low coefficient of friction, fluid fluoropolymers are used as specialty lubricants. Fluorocarbon-based greases are used in demanding applications. Representative products include Fomblin and Krytox, manufactured by Solvay Solexis and DuPont, respectively. Certain firearm lubricants such as "Tetra Gun" contain fluorocarbons. Capitalizing on their nonflammability, fluorocarbons are used in fire fighting foam. Organofluorine compounds are components of liquid crystal displays. The polymeric analogue of triflic acid, nafion is a solid acid that is used as the membrane in most low temperature fuel cells. The bifunctional monomer 4,4'-difluorobenzophenone is a precursor to PEEK-class polymers.

Biosynthesis of organofluorine compounds

Fluorinase.png

In contrast to the many naturally-occurring organic compounds containing the heavier halides, chloride, bromide, and iodide, only a handful of biologically synthesized carbon-fluorine bonds are known.[23] The most common natural organofluorine species is fluoroacetate, a toxin found in a few species of plants. Others include fluorooleic acid, fluoroacetone, nucleocidin (4’-fuoro-5’-O-sulphamoyladenosine), fluorothreonine, and 2-fluorocitrate. Several of these species are probably biosynthesized from fluoroacetaldehyde. The enzyme fluorinase catalyzed the synthesis of 5'-fluoro-5-deoxyadenosine (see scheme to right).

History

Organofluorine chemistry began in the 1800s with the development of organic chemistry as a whole.[11] The first organofluorine compounds were prepared by metathesis reactions using antimony trifluoride as the F- source. The nonflammability and nontoxicity of the chlorofluorocarbons CCl3F and CCl2F2 attracted industrial attention in the 1920s. In the 1930s, scientists at duPont discovered polytetrafluoroethylene.[24] Subsequent major developments, especially in the US, benefited from expertise gained in the production of uranium hexafluoride.[2] Starting in the late 1940’s, a series of electrophilic fluorinating methodologies were introduced, beginning with CoF3. About this time, electrochemical fluorination ("electrofluorination") was announced, having been developed in the 1930s with the goal of generating highly stable perfluorinated materials compatible with uranium hexafluoride.[8] These new methodologies allowed the synthesis of C-F bonds without using elemental fluorine and without relying on metathetical methods. In 1957, the anticancer activity of 5-fluorouracil was described. This report provided one of the first examples of rational design of drugs.[25] This discovery sparked a surge of interest in fluorinated pharmaceuticals and agrichemicals. The discovery of the noble gas compounds, e.g. XeF4, provided a host of new reagents starting in the early 1960’s. In the 1970s, fluorodeoxyglucose was established as a useful reagent in 18F positron emission tomography. In Nobel Prize-winning work, CFC’s were shown to contribute to the depletion of atmospheric ozone. This discovery alerted the world to the negative consequences of organofluorine compounds and motivated the development of new routes to organofluorine compounds. In 2002, the first C-F bond-forming enzyme, fluorinase, was reported.[26]

Environmental and health aspects

In addition to their many beneficial aspects, some organofluorine compounds pose significant risks and dangers to health and the environment. CFCs and HCFCs (hydrochlorofluorocarbon) deplete the ozone layer, and HFCs, perfluorocarbons (PFCs), and sulphur hexafluoride (SF6) are potent greenhouse gases and are facing calls for stricter international regulation and phase out schedules as a fast acting greenhouse emission abatement measure. Fluorosurfactants, such as PFOS and PFOA, are persistent and global contaminants. Many organofluorine compounds are bioactive and some are quite toxic, such as fluoroacetate and perfluoroisobutene.

References

  1. ^ a b c d e f g Kirsch, Peer Modern fluoroorganic chemistry: synthesis, reactivity, applications. Wiley-VCH, 2004.
  2. ^ a b c G. Siegemund, W. Schwertfeger, A. Feiring, B. Smart, F. Behr, H. Vogel, B. McKusick “Fluorine Compounds, Organic” in “Ullmann’s Encyclopedia of Industrial Chemistry” 2005, Wiley-VCH, Weinheim. doi:10.1002/14356007.a11 349
  3. ^ J. Lapasset, J. Moret, M. Melas, A. Collet, M. Viguier, H. Blancou (1996). "Crystal structure of 12,12,13,13,14,14,15,15,16,16,17,17,17-tridecafluoroheptadecan-1-ol, C17H23F13O". Z. Kristallogr. 211 (12): 945. doi:10.1524/zkri.1996.211.12.945. CSD entry TULQOG.
  4. ^ C.E. Smith, P.S. Smith, R.Ll. Thomas, E.G. Robins, J.C. Collings, Chaoyang Dai, A.J. Scott, S. Borwick, A.S. Batsanov, S.W. Watt, S.J. Clark, C. Viney, J.A.K. Howard, W. Clegg, T.B. Marder (2004). "Arene-perfluoroarene interactions in crystal engineering: structural preferences in polyfluorinated tolans". J. Mater. Chem. 14 (3): 413. doi:10.1039/b314094f.  CSD entry ASIJIV.
  5. ^ Dana Lyn S. Brahms, and William P. Dailey (1996). "Fluorinated Carbenes". Chemical Reviews 96 (5): 1585–1632. doi:10.1021/cr941141k. PMID 11848805. 
  6. ^ Brunet, Vincent A.; O'Hagan, David (2008). "Catalytic Asymmetric Fluorination Comes of Age". Angewandte Chemie, International Edition 47 (7): 1179–1182. doi:10.1002/anie.200704700. PMID 18161722. 
  7. ^ Stéphane Caron, Robert W. Dugger, Sally Gut Ruggeri, John A. Ragan, and David H. Brown Ripin (2006). "Large-Scale Oxidations in the Pharmaceutical Industry". Chemical Reviews 106 (7): 2943–2989. doi:10.1021/cr040679f. PMID 16836305. 
  8. ^ a b J. H. Simons “The Electrochemical Process for the Production of Fluorocarbons” Journal of The Electrochemical Society, 1949, Volume 95, pp. 47-66. doi: 10.1149/1.2776733
  9. ^ Vogel, A. I.; Leicester, J.; Macey, W. A. T., "n-Hexyl Fluoride", Org. Synth., http://www.orgsyn.org/orgsyn/orgsyn/prepContent.asp?prep=cv4p0525 ; Coll. Vol. 4: 525 
  10. ^ Flood, D. T., "Fluorobenzene", Org. Synth., http://www.orgsyn.org/orgsyn/orgsyn/prepContent.asp?prep=cv2p0295 ; Coll. Vol. 2: 295 
  11. ^ a b William R. Dolbier, Jr. (2005). "Fluorine Chemistry at the Millennium". Journal of Fluorine Chemistry 126 (2): 157. doi:10.1016/j.jfluchem.2004.09.033. 
  12. ^ Gauri S. Lal, Guido P. Pez, Reno J. Pesaresi and Frank M. Prozonic (1999). "Bis(2-methoxyethyl)aminosulfur trifluoride: a new broad-spectrum deoxofluorinating agent with enhanced thermal stability". Chemical Communications (2): 215. doi:10.1039/a808517j. 
  13. ^ Pichika Ramaiah, Ramesh Krishnamurti, and G. K. Surya Prakash (1998), "1-trifluoromethyl)-1-cyclohexanol", Org. Synth.: 232, http://www.orgsyn.org/orgsyn/orgsyn/prepContent.asp?prep=cv9P0711 
  14. ^ Le Bars, D. (2006). "Fluorine-18 and Medical Imaging: Radiopharmaceuticals for Positron Emission Tomography". Journal of Fluorine Chemistry 127 (11): 1488–1493. doi:10.1016/j.jfluchem.2006.09.015. .
  15. ^ Ann M. Thayer “Fabulous Fluorine” Chemical and Engineering News, June 5, 2006, Volume 84, pp. 15-24. http://pubs.acs.org/cen/coverstory/84/8423cover1.html
  16. ^ Kabayadi S. Ravikumar, Venkitasamy Kesavan, Benoit Crousse, Danièle Bonnet-Delpon, and Jean-Pierre Bégué (2003), "Mild and Selective Oxidation of Sulfur Compounds in Trifluorethanol: Diphenyl Disulfide and Methyle Phenyl Sulfoxide", Org. Synth. 80: 184, http://www.orgsyn.org/orgsyn/orgsyn/prepContent.asp?prep=v80p0184 
  17. ^ E.G. Hopea, A.P. Abbotta, D.L. Daviesa, G.A. Solana and A.M. Stuarta “Green Organometallic Chemistry” in Comprehensive Organometallic Chemistry III, 2007, Volume 12, Pages 837-864. doi:10.1016/B0-08-045047-4/00182-5
  18. ^ J. A. Gladysz, D. P. Curran, I. T. Horváth (Eds.) "Handbook of Fluorous Chemistry", Wiley–VCH, Weinheim, 2004. ISBN 978-3-527-30617-6.
  19. ^ Aimee Crombie, Sun-Young Kim, Sabine Hadida, and Dennis P. Curran, "Synthesis of Tris(2-Perfluorohexylethyl)tin Hydride: A Highly Fluorinated Tin Hydride with Advantageous Features of Easy Purification", Org. Synth., http://www.orgsyn.org/orgsyn/orgsyn/prepContent.asp?prep=CV79P0001 ; Coll. Vol. 10: 712 
  20. ^ M.E. Thompson, P.E. Djurovich, S. Barlow and S. Marder “Organometallic Complexes for Optoelectronic Applications” Comprehensive Organometallic Chemistry III, 2007, Volume 12, Pages 101-194. doi:10.1016/B0-08-045047-4/00169-2
  21. ^ J.C. Peters, J.C. Thomas “Ligands, Reagents, and Methods in Organometallic Synthesis” in Comprehensive Organometallic Chemistry III, 2007, Volume 1, Pages 59-92. doi:10.1016/B0-08-045047-4/00002-9
  22. ^ R.N. Perutz and T. Braun “Transition Metal-mediated C–F Bond Activation” Comprehensive Organometallic Chemistry III, 2007, Volume 1, Pages 725-758. doi:10.1016/B0-08-045047-4/00028-5.
  23. ^ O'Hagan, D; B. Harper, David (1999). "Fluorine-Containing Natural Products". Journal of Fluorine Chemistry 100: 127–133. doi:10.1016/S0022-1139(99)00201-8. 
  24. ^ Roy J. Plunkett Chemical Heritage Foundation. Retrieved 10 September 2006.
  25. ^ C. Heidelberger, N. K. Chaudhuri, P. Danneberg, D. Mooren, L. Griesbach, R. Duschinsky, R. J. Schnitzer, E. Pleven, and J. Schreiner (1957). "Fluorinated Pyrimidines, A New Class of Tumour-Inhibitory Compounds". Nature 179 (4561): 663. doi:10.1038/179663a0. PMID 13418758. 
  26. ^ O'Hagan, D; Schaffrath, C; Cobb, S. L; Hamilton, J. T; Murphy, C. D (2002). "Biochemistry: biosynthesis of an organofluorine molecule". Nature. 416 (6878): 279. doi:10.1038/416279a. PMID 11907567. 

Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Organofluorine — Some important organofluorine compounds A: fluoromethane B: isoflurane C: a CFC D: an HFC E: triflic acid F: Teflon G: PFOS H: fluorouracil I: Prozac Organofluorine compounds are organic …   Wikipedia

  • Methoxyflurane — Methoxyflurane …   Wikipedia

  • DuPont Central Research — In 1957, the research organization of the Chemicals Department of E. I. du Pont de Nemours and Company was renamed Central Research Department, beginning the history of the premier scientific organization within DuPont and one of the foremost… …   Wikipedia

  • Fluorocarbon — Perfluorohexane, a stable fluoroalkane liquid Fluorocarbons, sometimes referred to as perfluorocarbons or PFCs, are organofluorine compounds that contain only carbon and fluorine bonded together in strong carbon–fluorine bonds. Fluoroalkanes that …   Wikipedia

  • Organic reaction — Organic reactions are chemical reactions involving organic compounds.[1] The basic organic chemistry reaction types are addition reactions, elimination reactions, substitution reactions, pericyclic reactions, rearrangement reactions,… …   Wikipedia

  • John Tedder, 2nd Baron Tedder — John Michael Tedder, 2nd Baron Tedder, (July 4, 1926 ndash; February 18, 1994), was the Purdie Professor of Chemistry at St. Andrews University, Scotland.Early life and educationHe was the second born son of Arthur William Tedder and Rosalinde… …   Wikipedia

  • Caesium fluoride — Caesium fluoride …   Wikipedia

  • electrofluorination — noun A foundational organofluorine chemistry method for the preparation of fluorocarbon based organofluorine compounds via electrosynthesis …   Wiktionary

  • Gauche effect — Main article: alkane stereochemistry The term gauche refers to conformational isomers (conformers) where two vicinal groups are separated by a 60° torsion angle. IUPAC defines groups as gauche if they have a synclinal alignment of groups attached …   Wikipedia

  • Chlorofluorocarbon — A chlorofluorocarbon (CFC) is an organic compound that contains carbon, chlorine, and fluorine, produced as a volatile derivative of methane and ethane. A common subclass are the hydrochlorofluorocarbons (HCFCs), which contain hydrogen, as well.… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”