DNA separation by silica adsorption

DNA separation by silica adsorption

DNA Separation by Silica Adsorption is an important method of DNA separation that is used in novel technologies that use micro-channels. The principle behind this type of separation relies on DNA molecules binding to silica surfaces in the presence of certain salts and under certain pH conditions.

Contents

Why is this method of purification important?

Conventional methods for DNA extraction, such as centrifugation with ethanol or preparations using commercial purification kits, cannot be integrated onto microchips because they require multiple hands-on processing steps. In addition, they also require large equipment and high volumes of reagents and samples. DNA extraction on microchips provides a fast, cost effective, and effective for high-throughput screening, which also has a very small footprint. This new method has useful applications for biosensors, “lab on a chip” devices, and other new technologies that require rapid, high quality DNA at minimal cost.

How does this method of purification work?

Before going into great detail, let’s first outline the basic steps of this purification method:

1. The sample is run through a micro-channel
2. DNA binds to the channel, and all other molecules remain in the buffer solution
3. The channel is washed of impurities
4. An elution buffer removes the DNA from channel walls, and the DNA is collected at the end of the channel.

A sample (this may be anything from purified cells to a tissue specimen) is placed into the chip and lysed. The resultant mix of proteins, DNA, phospholipids, etc., is then run through the channel where the DNA is adsorbed by silica surface in the presence of solutions with high ionic strength. The highest DNA adsorption efficiencies are shown to occur in the presence of buffer solution with a pH at or below the pKa of the surface silanol groups. Although the exact mechanism for this interaction is not well understood, one possible explanation involves reduction of the silica’s surface’s negative charge due to the high ionic strength of the buffer. This decrease in surface charge leads to a decrease in the electrostatic repulsion between the negatively charged DNA and the negatively charged silica. Meanwhile, the buffer also reduces the activity of water by formatting hydrated ions. This leads to the silica surface and DNA becoming dehydrated. These conditions lead to an energetically favorable situation for DNA to adsorb to the silica surface.

A better explanation of how DNA binds to silica is based on the action of guanidium HCl (GuHCl), which acts as a chaotrope. A chaotrope denatures biomolecules by disrupting the shell of hydration around them. This allows positively charged ions to form a salt bridge between the negatively charged silica and the negatively charged DNA backbone in high salt concentration. The DNA can then be washed with high salt and ethanol, and ultimately eluted with low salt. After the DNA is adsorbed to the silica surface, all other molecules pass through the column. Most likely, theses molecules are sent to a waste section on the chip, which can then be closed off using a gated channel or a pressure- or voltage-controlled chamber. The DNA is then washed to remove any excess waste particles from the sample and then eluted from the channel using an elution buffer for further downstream processing.

The following solutions have been proposed and validated for use in this process:

DNA binding: GuHCl- based loading buffer
Channel Wash: 80% isopropanol
DNA elution: TE at pH 8.4

What kind of silicon micro DNA extraction surfaces exist?

Methods using silica beads and silica resins have already been created which successfully isolated DNA molecules which can then be PCR amplified. However, these methods have a few problems associated with them. First, beads and resins are highly variable depending on how well they are packed and are thus hard to reproduce. Each loading of a micro-channel can result in a different amount of packing and thus change the amount of DNA that adsorbed to the channel. Furthermore, these methods result in a two step manufacturing process.

Silica structures are a much more effective method of packing material because they are etched into the channel during its fabrication and is thus the result of a one step manufacturing processes via soft lithography. Silica structures are therefore easier to use in highly parallelized designs (since beads or resins don’t need to be introduced post manufacturing the chip). One of the possible explanation of DNA-silica interacting mechanism is described here: http://www.bio.davidson.edu/courses/Molbio/MolStudents/spring99/lauren/geneclean.html

References

  1. Cady, et al. Nucleic acid purification using microfabricated silicon structures. Biosensors and Bioelectronics 19, 59-66 (2003).
  2. K. A. Melzak, C. S. Sherwood, R. F. B. Turner, C. A. Haynes. Driving Forces for DNA Adsorption to Silica in Perchlorate Solutions. J Colloid and Interface Science 181, 635–644 (1996).
  3. Tian, et al. Evaluation of Silica Resins for Direct and Efficient Extration of DNA from Complex Biological Matrices in a Miniaturized Format.Analytical Biochemistry 283, 175-191 (2000).
  4. Wolfe, et al. Toward a microchip-based solid-phase extraction method for isolation of nucleic acids. Electrophoresis 23, 727-733 (2002).

See also


Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • separation and purification — ▪ chemistry Introduction       in chemistry, separation of a substance into its components and the removal of impurities. There are a large number of important applications in fields such as medicine and manufacturing. General principles… …   Universalium

  • Spin column-based nucleic acid purification — Silica on a minicolumn with water and with DNA sample in chaotropic buffer Column based nucleic acid purification is a solid phase extraction method to quickly purify nucleic acids. This method relies on the fact that the nucleic acid may bind… …   Wikipedia

  • Column-based nucleic acid purification — is a solid phase extraction method to quickly purify nucleic acids. This method relies on the fact that the nucleic acid may bind (adsorption) to the solid phase (silica or other) depending on the pH and the salt content of the buffer, which may… …   Wikipedia

  • Capillary electrophoresis — Infobox chemical analysis name = Capillary electrophoresis caption = acronym = CE classification =Electrophoresis analytes = Biomolecules Chiral molecules manufacturers = related = gel electrophoresis Two dimensional gel electrophoresis… …   Wikipedia

  • Phenol-chloroform extraction — is a liquid liquid extraction technique in biochemistry. It is widely used in molecular biology for isolating DNA, RNA and protein. Equal volumes of a phenol:chloroform mixture and an aqueous sample are mixed, forming a biphasic mixture. This… …   Wikipedia

  • Nanofluidic circuitry — is a nanotechnology aiming for control of fluids in nanometer scale. Due to the effect of an electrical double layer within the fluid channel, the behavior of nanofluid is observed to be significantly different compared with its microfluidic… …   Wikipedia

  • Monolithic HPLC column — A monolithic HPLC column is a special type of column used in HPLC with porous channels rather than beads. High performance liquid chromatography (HPLC) is the third most widely used laboratory instrument, surpassed only by analytical balances and …   Wikipedia

  • (C6H11NO)n — Poly(N isopropylacrylamide) Structure du poly(N isopropylacrylamide). La structure entre crochets constitue, en se répétant, le squelette des chaînons du polymère. Le poly(N isopropylacrylamide) (abrégé en polyNIPAM, PNIPAM ou PNIPAAm) est un… …   Wikipédia en Français

  • 25189-55-3 — Poly(N isopropylacrylamide) Structure du poly(N isopropylacrylamide). La structure entre crochets constitue, en se répétant, le squelette des chaînons du polymère. Le poly(N isopropylacrylamide) (abrégé en polyNIPAM, PNIPAM ou PNIPAAm) est un… …   Wikipédia en Français

  • PNIPAAm — Poly(N isopropylacrylamide) Structure du poly(N isopropylacrylamide). La structure entre crochets constitue, en se répétant, le squelette des chaînons du polymère. Le poly(N isopropylacrylamide) (abrégé en polyNIPAM, PNIPAM ou PNIPAAm) est un… …   Wikipédia en Français

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”