Boeing 2707

Boeing 2707

Infobox Aircraft
name = 2707
type = Supersonic transport
manufacturer = Boeing Commercial Airplanes




caption = Model of a Boeing 2707.
designer =
status = Cancelled
number built = 0 completed
unit cost =
variants with their own articles =

The Boeing 2707 was developed as the first American supersonic transport (SST). After winning a competition for a government-funded contract to build an American SST, Boeing began development at its facilities in Seattle, Washington. Rising costs, the lack of a clear market, and increasing outcry over the environmental effects of the aircraft—notably sonic boom—led to its cancellation in 1971 before two prototypes had been completed.

Development

Early studies

Boeing had worked on a number of small-scale SST studies since 1952. In 1958, it established a permanent research committee, which grew to a $1 million effort by 1960. The committee proposed a variety of alternative designs, all under the name Model 733. Most of the designs featured a large delta wing, but in 1959 another design was offered as an offshoot of Boeing's efforts in the swing-wing TFX project (which led to the purchase of the General Dynamics F-111 instead of the Boeing offering). In 1960, an internal "competition" was run on a baseline 150-seat aircraft for trans-Atlantic routes, and the swing-wing version won. [ [http://www.unrealaircraft.com/classics/sst.php Lost Classics - Boeing 2707-200 SST] ]

By mid-1962, it was becoming clear that tentative talks earlier that year between the Bristol Aeroplane Company and Sud Aviation on a merger of their SST projects were more serious than originally thought. It appeared there was a very real chance the combined companies would be offering a design. In November, the two companies announced that a design called "Concorde" would be built by a consortium effort. This set off something of a wave of panic in other countries, as it was widely believed that almost all future commercial aircraft would be supersonic, and it looked like the Europeans would start off with a huge lead.

National commitment

On June 5, 1963, President John F. Kennedy formed the National Supersonic Transport program, which committed the government to subsidizing 75% of the development costs of a commercial airliner to compete with Concorde. The director of the Federal Aviation Administration, Najeeb Halaby, decided Concorde was too far ahead in development to bother building a direct competitor, and instead selected a much more advanced standard as their baseline. The American SST was intended to carry 250 passengers (more than twice as many as Concorde), fly at Mach 2.7–3.0, and have a trans-Atlantic range of convert|4000|mi|km. The high speed demanded that the aircraft be made out of either stainless steel or titanium, because skin friction at speeds above Mach 2.2 would cause conventional aircraft duralumin (an aluminum alloy) to lose its temper and strength. The target speed thus significantly inflated the price. This decision would dramatically increase costs, and calculations later showed this would have only cut 20 minutes from a journey across the Atlantic over Concorde due to acceleration time and similar issues.

Requests for Proposals were sent out to airframe manufacturers Boeing, Lockheed, and North American for the airframes; and Curtiss-Wright, General Electric and Pratt & Whitney for engines. The FAA estimated that there would be a market for 500 SSTs by 1990.

Design competition

Preliminary designs were submitted to the FAA on January 15, 1964. Boeing's entry was essentially identical to the swing-wing Model 733 studied in 1960; it was known officially as the Model 733-197, but also referred to both as the 1966 Model and the Model 2707. The latter name became the best known in public, while Boeing continued to use 733 model numbers. The design had an uncanny resemblance to the future B-1 Lancer bomber, with the exception that the four engines were mounted in individual nacelles instead of the box-like system mounted in pairs on the four-engined Lancer.

A "downselect" of the proposed models resulted in the North American NAC-60 and Curtiss-Wright efforts being dropped from the program, with both Boeing and Lockheed asked to offer SST models meeting the more demanding FAA requirements and able to use either of the remaining engine designs. In November, another design review was held, and by this time Boeing had scaled up the original design into a 250-seat model, the Model 733-290. Due to concerns about jet blast, the four engines were moved to a position underneath an enlarged tailplane. When the wings were in their swept-back position, they merged with the tailplane to give a delta-wing platform.

Both companies were now asked for considerably more detailed proposals, to be presented for final selection in 1966. When this occurred, Boeing's design was now the 300-seat Model 733-390. Both the Boeing and Lockheed L-2000 designs were presented in September 1966 along with full-scale mock-ups. A lengthy review followed, and on December 31, 1966, Boeing was announced as the winner. The design would be powered by the General Electric GE4/J5 engines. Lockheed's L-2000 was judged simpler to produce and less risky, but its performance was slightly lower and its noise levels slightly higher.

Refining the design

The -390 would have been an advanced aircraft even if it had been only subsonic. It was one of the earliest wide-body designs, using a 2-3-2 row seating arrangement in a fuselage that was considerably wider than aircraft then in service. The SST mock-up included both overhead storage for smaller items with restraining nets, as well as large drop-in bins between sections of the aircraft. In the main 247-seat tourist-class cabin, the entertainment system consisted of retractable televisions placed between every sixth row in the overhead storage. In the 30-seat first-class area, every pair of seats included smaller televisions in a console between the seats. Windows were only 6" due to the high altitudes the aircraft flew at maximizing the pressure on them, but the internal pane was 12" to give an illusion of size.

Boeing predicted that if the go-ahead were given, construction of the SST prototypes would begin in early 1967 and the first flight could be made in early 1970. Production aircraft could start being built in early 1969, with the flight testing in late 1972 and certification by mid-1974.

A major change in the design came when Boeing added canards behind the nose—which added weight. Boeing also faced insurmountable weight problems due to the swing-wing mechanism. In October 1968, the company was finally forced to abandon the variable geometry wing. The Boeing team fell back on a tailed delta wing—somewhat in irony given that the rejected Lockheed design had a fixed wing. The new design was also smaller, seating 234, and known as the Model 2707-300. Work began on a full-sized mock-up and two prototypes in September 1969, now two years behind schedule.

A promotional film claimed that airlines would soon pay back the federal investment in the project, and it was projected that SSTs would dominate the skies with subsonic jumbo jets (such as Boeing's own 747) being only a passing intermediate fad.

Environmental concerns

By this point, the opposition to the project was becoming increasingly vocal. Environmentalists were the most influential group, voicing concerns about possible depletion of the ozone layer due to the high altitude flights, and about noise at airports from sonic booms. The latter became the most significant rallying point, and supersonic flight over land in the United States was eventually banned.

The project suffered political opposition from the left, which disliked the government subsidizing the development of a commercial aircraft to be used by private enterprise. The anti-SST campaign was led by Democratic Senator William Proxmire (D-Wisconsin), who saw the campaign as a crusade against unnecessary spending by the federal government.

Government funding cut

In March 1971, despite the project's strong support by the administration of President Richard Nixon, the U.S. Senate rejected further funding. Afterward, letters of support from aviation buffs, containing nearly $1 million worth of contributions, poured in. But the SST project was canceled on May 20, 1971. At the time, there were 115 unfilled orders by 25 airlines; at the same time, Concorde had 74 orders from 16 customers.cite journal | author=Thomas, Geoffrey | title=The New 747| journal=Airways | year=2006 | volume=13 | issue=122 | pages=16–22 | url=http://airwaysmag.com ] The two prototypes were never completed. The SST became known as "the airplane that almost ate Seattle." Due to the loss of several government contracts and a downturn in the civilian aviation market, Boeing reduced its number of employees by more than 60,000. A billboard was erected in 1971 that read, "Will the last person leaving Seattle - turn out the lights"cite web | title=The Online Encyclopedia of Washington State History | work=Turning Point 7: A Bumpy Ride: Seattle's Economic Booms, Busts and Comebacks | url=http://www.historylink.org/essays/output.cfm?file_id=3224 | accessdate=2006-04-16]

Legacy

North American Rockwell's B-1 [ [http://www.faqs.org/docs/air/avb1.html B-1 page on faqs.org] ] would successfully use a similar layout as the model 733-197. The B-1B is the only swing-wing aircraft still in service with US forces.

Seattle's NBA basketball team formed in 1968 was dubbed the Seattle SuperSonics or just "Sonics", a name inspired by the newly won SST contract. [ [http://basketball-reference.com/teams/SEA/ Seattle Supersonics Team Index] ] The team kept that name until its 2008 move to Oklahoma City, and Seattle holds the right to apply the name to any future NBA franchise there.

The Museum of Flight in Seattle parks its Concorde across from the building where the original mockup was housed in Seattle. [http://www.museumofflight.org/Display.asp?Page=Concorde Museum of Flight] While the Soviet Tu-144 had a short service life, [ [http://www.nasa.gov/centers/dryden/news/FactSheets/FS-062-DFRC.html] NASA Dryden Tu-144 "Limited range and other technical problems led to service being discontinued in 1978 after only 102 passenger flights"] Concorde was successful enough to fly as a small luxury fleet from 1976 into the 21st century. As the most advanced supersonic transports became some of the oldest airframes in the fleet, they also fell to the economics of new efficient subsonic jets and upgrade costs. [ [http://www.concordesst.com/retire/retireindex.html] Concorde retires]

Though many designs have been studied since, it is unlikely similar aircraft will be economically feasible in the foreseeable future. Concorde's model of cooperation paved the way for Airbus, Boeing's most formidable competitor. [ [http://www.centennialofflight.gov/essay/Aerospace/Airbus/Aero52.htm Airbus Industrie] ] Seattle's economy is now more diverse, and 2007 made Boeing a leader in sales again. Boeing's Future of Flight museum has the story and models of all of its production jetliners and Concorde, but not the SST project.

One of the wooden mockups was displayed at the SST Aviation Exhibit Center in Kissimmee, Florida from 1973 to 1981. It is now on display at the Hiller Aviation Museum of San Carlos, California. [ [http://www.lostparks.com/SST.html] ]

Airline commitments

*Aer Lingus (2)
*Aeronaves de México (2)
*Air France (6)
*Air India (3)
*Alitalia (6)
*American Airlines (6)
*BOAC (6)
*Braniff Airways (2)
*Canadian Pacific (3)
*Continental Airlines (3)
*Delta (3)
*Eastern (3)
*El Al (2)
*Iberia (3)
*Japan Airlines (5)
*KLM (3)
*Lufthansa (3)
*Northwest Airlines (4)
*Pakistan International Airlines (PIA) (2)
*Pan American World Airways (15)
*Qantas (6)
*Trans Am (2)
*Trans World Airlines (10)
*United Airlines (6)
*World Airways (3)

pecifications

Boeing 2707-200 SST

SPAN:180 ft 4 in (54.97 m) spread,105 ft 9 in (32.23 m) swept.

LENGTH:306 ft 0 in (93.27 m)

HEIGHT:46 ft 3 in (14.1 m)

TAKEOFF LENGTH:5,700 ft (1870 m)

LANDING LENGTH:6,500 ft (2133 m)

FUSELAGE MAX. EXTERNAL DIMENSIONS:Width 16 ft 8 in (5.08 m),depth 15 ft 7 in (4.75 m)

POWERPLANT:Four General Electric GE4/J5P turbojets,each of convert|63200|lb|abbr=on. st (28677 kgp) each,with augmentation.

EMPTY OPERATING WEIGHT(International model):287,500 lb (130308 kg)

MAX. RAMP WEIGHT:675,000 lb (306175 kg)

MAX. LANDING WEIGHT:430,000 lb (195045 kg)

MAX. PAYLOAD:75,000 lb (34020 kg)

NORMAL CRUISING SPEED:Mach 2.7 1,800 mph (2900 km/h)at 64,000 ft / 21000m

RANGE:4,250 mls (6840 km)with 277 passengers

ee also

aircontent
related=
similar aircraft=
* Concorde
* Tupolev Tu-144
* Tupolev Tu-444
* Lockheed L-2000
lists=
see also=

References

External links

* [http://history.nasa.gov/monograph39/mon39_a.pdf NASA Innovation in Flight] - NASA monograph covering projects from B-70 to Boeing and Lockheed SST designs and recent SST studies
* [http://www.boeing.com/history/boeing/sst.html Boeing Supersonic Transport page]
* [http://www.vectorsite.net/avsst.html#m1 Boeing 2707-300 on Vectorsite.net]
* [http://www.super70s.com/Super70s/Tech/Aviation/Aircraft/SST.asp Boeing SST on Super70s.com]
* [http://www.hiller.org/sst.shtml Boeing SST mockup on display at the Hiller Aviation Museum]
* [http://www.emotionreports.com/downloads/pdfs/boeing.pdf Boeing 2707-300 Description at emotionreports.com]
* [http://www.sergib.agava.ru/usa/boeing/733/b733.htm Initial 733 proposal images on Russian site sergib.agava.ru]


Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • Boeing 2707 — Modell des B 2707 300 Entwurfs …   Deutsch Wikipedia

  • Boeing 2707 — Maquette d un Boeing 2707 Rôle Avion de ligne supersonique Constructeur …   Wikipédia en Français

  • Boeing 2707 — Saltar a navegación, búsqueda Boeing 2707 Modelo de un Boeing 2707 Tipo Transporte Supersónico Fabricante …   Wikipedia Español

  • Boeing 2707 — Модель Boeing 2707 300. Тип …   Википедия

  • Boeing B-2707 — Boeing 2707 Entwurf B 2707 300 …   Deutsch Wikipedia

  • 2707 — Boeing 2707 Maquette d un Boeing 2707 Le Boeing 2707 devait être le premier avion de ligne supersonique des États Unis. Il aurait été assemblé dans les ateliers de Boeing à Renton, Washington, mais le coût très élevé du projet et les réactions… …   Wikipédia en Français

  • Boeing 747 — 400 Rôle Avion de ligne Constructeur …   Wikipédia en Français

  • Boeing 747-100 — Boeing 747 …   Deutsch Wikipedia

  • Boeing 747-131 — Boeing 747 …   Deutsch Wikipedia

  • Boeing 747-200 — Boeing 747 …   Deutsch Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”