Leather production processes

Leather production processes

The leather manufacturing process is divided into 3 fundamental sub-processes: preparatory stages, tanning and crusting. All true leathers will undergo these sub-processes. A further sub-process, surface coating can be added into the leather process sequence but not all leathers receive surface treatment. It's difficult to create a list of operations that all leathers must undergo, as there are so many types of leather.

Production management

The leather making process is in general restricted to batch processing, but if the surface coating sub-process is added then some continuous processing can be included. The operation flow has to follow the preparatory → tanning → crusting → surface coating sub-process order without deviation, but some of the sub-processes can be omitted to make certain leathers (or partially tanned/ untanned products). It is not uncommon for tanneries to

Preparatory stages

The preparatory stages are when the hide/skin is prepared for tanning [citation
title = Leather Technician's Handbook
first = J.H. | last = Sharphouse
page = 37
publisher = Leather Producer's Association
isbn = 0950228516
] . During the preparatory stages many of the unwanted raw skin components are removed. Many options for pretreatment of the skin exist. Not all of the options may be performed. Preparatory stages may include [citation
title = Leather Technnologist's Pocket Book
first = M.K. | last = Leafe
page = 23
publisher = Society of Leather Technologists and Chemists
] :

* preservation- the hide/skin is treated with a method which renders it temporarily unputrescible.
* soaking - water for purposes of washing or rehydration is reintroduced.
* liming - unwanted proteins and "opening up" is achieved.
* unhairing - the majority of hair is removed.
* fleshing - subcutaneous material is removed.
* splitting - the hide/skin is cut into two or more horizontal layers.
* reliming - the hide/skin is further treated to achieve more "opening up" or more protein removal.
* deliming - liming and unhairing chemicals are removed from the pelt.
* bating - proteolytic proteins are introduced to the skin to remove further proteins and to assist with softening of the pelt [citation
title = Fundamentals of Leather Manufacture
first = E. | last = Heidemann
page = 211
publisher = Eduard Roether KG
isbn = 3792902060
] .
* degreasing - natural fats/oils are stripped or as much as is possible from the hide/skin [citation
title = Physical Chemistry of Leather Making
first = K. | last = Bienkiewiecz
page = 298
publisher = Robert E. Krieger
isbn = 0898743044
] ..
* frizing - physical removal of the fat layer inside the skin [citation
title = Leather Technician's Handbook
first = J.H. | last = Sharphouse
page = 212
publisher = Leather Producer's Association
isbn = 0950228516
] . Also similar to Slicking.
* bleaching - chemical modification of dark pigments to yield a lighter coloured pelt.
* pickling - lowering of the pH value to the acidic region. Must be done in the presence of salts. Pickling is normally done to help with the penetration of certain tanning agents, e.g., chromium (and other metals), aldehydic and some polymeric tanning agents
* depickling - raising of the pH out of the acidic region to assist with penetration of certain tanning agents

Tanning

Tanning is the process converts the protein of the raw hide or skin into a stable material which will not putrefy and is suitable for a wide variety of end applications. The principal difference between raw hides and tanned hides is that raw hides dry out to form a hard inflexible material that when re-wetted (or wetted back) putrefy, whilst tanned material dries out to a flexible form that does not become putrid when wetted back. There is a large number of different tanning methods and materials that can be used, the choice is ultimately dependent on the end application of the leather. The most commonly used tanning material is chromium, which leaves the leather once tanned a pale blue colour (due to the chromium), this product is commonly called “wet blue”. The hides once they have finished pickling will typically be between pH of 2.8-3.2. At this point the hides would be loaded in a drum and immersed in a float containing the tanning liquor. The hides are allowed to soak (while the drum slowly rotates about its axle) and the tanning liquor slowly penetrates through the full substance of the hide. Regular checks will be made to see the penetration by cutting the cross section of a hide and observing the degree of penetration. Once a good even degree of penetration exists, the pH of the float is slowly raised in a process called basification. This basification process fixes the tanning material to the leather and the more tanning material fixed the higher the hydrothermal stability and increased shrinkage temperature resistance of the leather. The pH of the leather when chrome tanned would typically finish somewhere between 3.8-4.2 [citation
title = Fundamentals of Leather Manufacture
first = E. | last = Heidemann
page = 296
publisher = Eduard Roether KG
isbn = 3792902060
] .

Crusting

Crusting is when the hide/skin is thinned, retanned and lubricated. Often a coloring operation is included in the crusting sub-process. The chemicals added during crusting have to be fixed in place. The culmination of the crusting sub-process is the drying and softening operations. Crusting may include the following operations:

* wetting back - semi-processed leather is rehydrated.
* sammying - 45-55%(m/m) water is squeezed out the leather.
* splitting - the leather is split into one or more horizontal layers.
* shaving - the leather is thinned using a machine which cuts leather fibres off.
* rechroming - more chrome is fixed to the leather.
* neutralisation - the pH of the leather is adjusted to a value between 4.5 and 6.5.
* retanning - additional tanning agents are added to impart properties.
* dyeing - the leather is coloured.
* fatliquoring - fats/oils and waxes are fixed to the leather fibres.
* filling - heavy/dense chemicals that make the leather harder and heavier are added.
* stuffing - fats/oils and waxes are added between the fibres.
* stripping - superficially fixed tannins are removed.
* whitening - the colour of the leather is lightened.
* fixation - all unbound chemicals are chemically bonded/trapped or removed from the leather
* setting - area, grain flatness are imparted and excess water removed.
* drying - the leather is dried to various moisture levels (commonly 14-25%).
* conditioning - water is added to the leather to a level of 18-28%.
* milling
* staking
* buffing

urface coating

For some leathers a surface coating is applied. Tanners refer to this as finishing. Finishing operations may include:

* oiling
* brushing
* padding
* impregnation
* buffing
* spraying
* roller coating
* curtain coating
* polishing
* plating
* embossing
* ironing
* ironing/combing (Hair-on)
* glazing

References


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Leather — For other uses, see Leather (disambiguation). Modern leather working tools Leather is a durable and flexible material created via the tanning of putrescible animal rawhide and skin, primarily cattlehide. It can be produced through different… …   Wikipedia

  • Ostrich leather — is the result of tanning skins taken from African ostriches farmed for their feathers, skin and meat. The leather is distinctive for its pattern of bumps or vacant quill follicles, ranged across a smooth field in varying densities. It requires an …   Wikipedia

  • Mass production — This article is about large scale production. For the Iggy Pop piece, see The Idiot (album). For the American funk band, see Mass Production (band). Mass production (also flow production, repetitive flow production, series production, or serial… …   Wikipedia

  • Tannin — For other uses, see Tannin (demon). Tannic acid …   Wikipedia

  • Livestock — For other uses, see Livestock (disambiguation). Domestic sheep and a cow (heifer) pastured together in South Africa Livestock refers to one or more domesticated animals raised in an agricultural setting to produce commodities such as food, fiber… …   Wikipedia

  • Character mask — Part of a series on Marxism …   Wikipedia

  • soap and detergent — ▪ chemical compound Introduction       substances that, when dissolved in water, possess the ability to remove dirt (detergent) from surfaces such as the human skin, textiles, and other solids. The seemingly simple process of cleaning a soiled… …   Universalium

  • Halocin — Halocins are bacteriocins produced by halophilic Archaeacite journal |author=Li Y, Xiang H, Tan H |title= [Halocin: protein antibiotics produced by extremely halophilic archaea] |language=Chinese |journal=Wei Sheng Wu Xue Bao |volume=42 |issue=4… …   Wikipedia

  • List of Russian people — The Millennium of Russia monument in Veliky Novgorod, featuring the statues and reliefs of the most celebrated people in the first 1000 years of Russian history …   Wikipedia

  • Bozouls — is a commune in the Aveyron département in southern France.Located in southwestern France in the Rodez arrondissement the tranquil hamlet of Bozouls, the entrance door of the highland, is home to 2,600 inhabitants within Aveyron, the largest of… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”