Outwood Windmill

Outwood Windmill

Outwood Windmill is a Grade I listed[1] post mill in Outwood, Surrey. Built in 1665 by Thomas Budgen, a miller from Nutfield in Surrey, it is Britain's oldest working windmill.[2]

The windmill was one of a pair, as there was a smock mill built alongside in 1797. This mill had the tallest smock tower in the United Kingdom. The mill collapsed in 1960.

Contents

History

Post mill

Outwood post mill
Outwood Windmill.jpg
Outwood post mill
Origin
Mill name Outwod post mill
Mill location Outwood, Surrey
Grid reference TQ 328 456
Coordinates 51°11′38″N 0°06′04″W / 51.194°N 0.101°W / 51.194; -0.101Coordinates: 51°11′38″N 0°06′04″W / 51.194°N 0.101°W / 51.194; -0.101
Operator(s) Private
Year built 1665
Information
Purpose Corn mill
Type Post mill
Roundhouse storeys Single storey roundhouse
Number of sails Four sails
Type of sails Spring sails
Windshaft Wood, with cast iron poll end
Winding Tailpole
Number of pairs of millstones Two pairs, Head and Tail
Size of millstones 4 feet (1.22 m) diameter

Outwood Windmill was built for Thomas Budgen (1640–1716) in 1665. The original deed for its erection is still in existence. Thomas Budgen borrowed the money to finance the building of the windmill from two of his brothers-in-law. He was able to repay them within two years. The builders of the mill are traditionally said to have watched the Great Fire of London glowing in the distance, some 25 miles (40 km) away. In 1678, Thomas Budgen was convicted under the Convecticle Act as a seditious preacher, and fined £20.[3]

John Budgen took the mill on his father's death, and in 1715 was paying Quit Rent on the mill, a malthouse and a brick kiln. John Budgen died in 1765 and the rent was paid by his widow until she died in 1768, when Ezekial Budgen took the mill. Ezekial Budgen was involved in a quarrel with his brother Isaac, which led to William Budgen (Ezekial's nephew) being granted a piece of land in near the mill in 1796 with liberty to erect a windmill upon it. By 1806, the mill was in the possession of John Jupp. William Jupp took the mill sometime before 1880 and ran it until he died in 1934. In 1929, the Windmill Section of the Society for the Protection of Ancient Buildings recognised the mill as "of paramount importance". A new pair of Spring sails were needed in 1931. The Society paid for Thomas Hunt, the Soham millwright to make and fit these at a cost of £80. William Jupp agreed not to sell the mill for demolition as a condition of the work being done. Publicity generated at the time led to an increase in orders at the mill. On 30 October 1931, a meeting was held to appeal for funds to replace the older pair of sails. Hilaire Belloc, who at the time owned Shipley windmill in Sussex, was the main speaker. Sir Joseph Rank was one of the subscribers. In 1933, a pair of sails was purchased secondhand[3] These had previously been on the Black Mill, Forncett End, Norfolk, which had been demolished in September 1932.[4] These replaced a pair of sails that had been on the mill for in excess of sixty years. William Jupp died in 1934.[3]

Stanley Jupp then took the mill. In the 1930s, the mill was little used, and started to deteriorate. Plans were drawn up for further restoration, but were postponed due to World War II. Milling ceased at Outwood in 1949 when the breast beam cracked and the windshaft dropped causing the sails to touch the roundhouse roof. Temporary repairs were made by millwrights E Hole & Son of Burgess Hill, followed by extensive repairs, including a new breast beam and prick post, in 1952. One of the sail stocks was found to be defective in 1955 and a new pair of spring sails was fitted. A grant of £750 from the Ministry of Works being given to enable the work to be carried out, on condition that public access would be given on appointment. The older of the two stocks broke in January 1956. E Hole & Son fitted a new stock and sail on 25 October 1958. William Jupp ran the mill until 1962. In the autumn of 1962, the mill was bought by the Thomas brothers.[3]

On 12 June 1964, the mill was caught in a severe thunderstorm. The mill was tailwinded, and only saved when the new owners turned the mill so that the wind was side on to the mill.[3] In 2003, the mill was offered for sale, with a price tag of £600,000.[5]

Smock mill

Outwood smock mill
Outwood smock mill.jpg
The smock mill, c.1903. Note the missing fantail has been drawn in
Origin
Mill name High Mill
Year built 1796
Information
Purpose Corn mill
Type Smock mill
Storeys Five storey smock
Base storeys Low brick base of a few courses
Smock sides Eight sides
Number of sails Four sails
Type of sails Spring Patent sails
Windshaft Cast iron
Winding Fantail
Number of pairs of millstones Four pairs
Year lost 1960
Other information Tallest smock tower of any windmill in the United Kingdom

On 24 November 1796, William Budgen was granted leave to erect a windmill on a plot of land near the post mill. The smock mill was run by the Budgen family until 1885 when Edward Scott, of Woolpits Mill, Nutfield bought the lease of the mill for £1,225. The mill was later worked be Edward's son, and in 1903 one of the sails broke whilst the mill was at work. It was worked with only two sails until 1914, assisted by a portable steam engine as necessary. In 1950, the preservation of the mill was proposed. A survey undertaken in 1953 showed the mill to be suffering from rot to the cant posts and sills at the south west side (facing the prevailing weather) and the cost to be prohibitive. The mill collapsed in the early hours of 25 November 1960.[3]

Description

Post mill

Outwood Mill is a post mill on a single storey roundhouse. It has four Spring sails controlled by elliptical springs, carried on a wooden Windshaft with a cast iron poll end. The mill drives two pairs of millstones, arranged Head and Tail and is winded by tailpole.

Substructure

The oak trestle is composed of two crosstrees, four quarterbars and the main post. The crosstrees are 22 feet (6.71 m) long and 12 inches (300 mm) square in section, as are the quarterbars. The main post is 16-foot-3-inch (4.95 m) high, and tapers from 29 inches (740 mm) square at the base to 16 inches (410 mm) diameter at the Samson Head. The whole is housed in a roundhouse of 22 feet (6.71 m) diameter[3] with 9 feet (2.74 m) high walls.

Body

The body of the mill measures 18 feet (5.49 m) by 11 feet (3.35 m) in plan, and the mill is 39 feet (11.89 m) tall to the roof. All the milling machinery is housed within the body. The Crown Tree bears a date of 1880, possibly indicating its replacement in that year.[3] The body weighs about 25 long tons (25.4 t).[2]

Machinery

The mill has carried a number of sails over the years. In 1905, it is known to have had odd sails, one pair being double shuttered Spring sails of 25 feet (7.62 m) length, and tapering from 7-foot-6-inch (2.29 m) wide at the heel to 7-foot-1-inch (2.16 m) at the tip. The other pair were narrower, tapering from 6 feet (1.83 m) at the heel to 5-foot-6-inch (1.68 m) at the tip. These were carried by an oak windshaft with a cast iron poll end.[3] The sails currently on the mill span 60 feet (18.29 m).[2] The windshaft is 16 feet (4.88 m) long, and tapers from 23 inches (0.58 m) diameter at the neck to 13 inches (0.33 m) diameter at the tail. The windshaft carries a 8-foot-3-inch (2.51 m) diameter wooden Head Wheel with 108 cogs and a composite Tail Wheel, with a cast iron centre and wooden rim. The Tail Wheel has 84 cogs. The Head stones are 4 feet (1.22 m) diameter Peak stones, and the Tail stones are French Burr stones. Both wheels drove additional machinery in the past, the Head wheel driving an oat crusher (now no longer in place) and the Tail Wheel driving the sack hoist.[3]

Smock mill

Outwood Smock Mill, also known as High Mill, was a tall smock mill of five storeys, with a stage at first floor level. It was built on a low brick base less than 2 feet (610 mm) high. The cant posts were 48 feet (14.63 m) long, and the mill stood 62 feet (18.90 m) high to the top of the cap. This made it the tallest smock ever built, although not the tallest smock mill (Union Mill, Cranbrook takes that honour). Unusually, the ground floor was above ground level, at a height of about 3 feet (910 mm). The smock was 26 feet (7.92 m) across the flats at the base, and 13 feet (3.96 m) at the curb. The cap was 13 feet (3.96 m) by 11-foot-6-inch (3.51 m) in plan, and winded by a five bladed fantail. The four sails were Spring Patents, spanning 80 feet (24.38 m), carried in a cast iron Windshaft. The Brake Wheel was 9-foot-10-inch (3.00 m) diameter, driving a 4 feet (1.22 m) diameter cast iron Wallower. This had replaced an earlier Wallower of 4-foot-8-inch (1.42 m) diameter which bore a date of 1864, indicating that the mill had three wallowers in a working life of 117 years. The wooden Upright shaft was sixteen-sided, 20 inches (510 mm) across the flats, with a dog clutch allowing the windmill to be disconnected when the mill was being driven by the portable engine. The wooden Great Spur Wheel was 8-foot-8-inch (2.64 m) diameter, with 120 cogs. The mill drove four pairs of overdrift millstones, one pair bearing a date of 1859.[3]

Public Access

Outwood windmill is open to public at the following times:-

Sundays - 12:00 (midday) until 18:00 PM Bank Holidays - 11:00 AM until 18:00 PM

Saturdays - the windmill is open on SOME Saturdays throughout the summer season

Millers

The following millers were associated with Outwood windmills.[3]

Post mill

  • Thomas Budgen 1665 - 1716
  • John Budgen 1716 - 1765
  • widow Budgen 1765 - 1768
  • Ezekiel Budgen 1768 -
  • John Jupp 1807 -
  • William Jupp 1880 – 1934
  • Stanley Jupp 1934 – 1962
  • Gerald & Raymond Thomas 1962 - 1996

Smock mill

  • William Budgen 1797 -
  • Edward Scott 1885 - 1914

References

  1. ^ "OUTWOOD POST MILL, GAYHOUSE LANE, BURSTOW, TANDRIDGE, SURREY". English Heritage. http://www.imagesofengland.org.uk/details/default.aspx?pid=2&id=287325. Retrieved 2008-05-05. 
  2. ^ a b c "THE WINDMILL". Outwood windmill. http://www.outwoodwindmill.co.uk/windmill.htm. Retrieved 2008-05-14. 
  3. ^ a b c d e f g h i j k l Farries, Kenneth and Mason, R T (1966). The Windmills of Surrey and Inner London. London: Charles Skilton. pp. 165–177. 
  4. ^ "Forncett St Peter, Forncett End black postmill". Norfolk Mills. http://www.norfolkmills.co.uk/Windmills/forncett-st-peter-black-postmill.html. Retrieved 2008-05-14. 
  5. ^ "For sale: Britain's oldest windmill". BBC News Online. 27 May 2003. http://news.bbc.co.uk/1/hi/england/southern_counties/2941136.stm. Retrieved 2008-05-14. 

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Outwood, Surrey — Coordinates: 51°11′27″N 0°06′43″W / 51.1907°N 0.112°W / 51.1907; 0.112 …   Wikipedia

  • Chesterton Windmill — in Warwickshire Origin Mill name Chesterton Windmill …   Wikipedia

  • Chillenden Windmill — Origin Grid reference …   Wikipedia

  • High Salvington Windmill — For an explanation of the various pieces on machinery mentioned, see Mill machinery. High Salvington Mill …   Wikipedia

  • Denver Windmill — The restored mill, April 2006 Origin Mill name Denver Mill Grid reference …   Wikipedia

  • Cley Windmill — The mill in 2008 Origin Mill name Cley Mill …   Wikipedia

  • Cromer Windmill, Ardeley — Ardeley Windmill The mill in 2006 Origin Mill name Cromer Mill …   Wikipedia

  • Nutley Windmill — Nutley Mill The mill in 2005 Origin Mill location TQ 451 291 …   Wikipedia

  • Chalton Windmill — Origin Mill name Chalton mill Grid reference SU 7160 1608 …   Wikipedia

  • Chislet Windmill — Origin Grid reference TR 224 679 Year built 1744 …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”