Oroville-Thermalito Complex

Oroville-Thermalito Complex
Oroville-Thermalito Complex

Region: Northern California
Nearest City(s): Oroville & Thermalito, CA
Operator(s): Department of Water Resources, State of California (aka: DWR)
Main Source: Lake Oroville
Other Sources: Feather River, Ground Run-off
Construction Period: 1961-1969
Opened/Operations Began: 1968-1969
Oroville, California. The complex serves as the headwaters for, and therefore is the most vital facility of, the California Department of Water Resources' State Water Project, the world's largest publicly built and operated water and power development and conveyance system.



The Oroville-Thermalito Complex was designed as an efficient water and power system. It stores about 3,500,000 acre feet (4.3 km3) and generates power from releases made through Hyatt Powerplant and two other Thermalito generating plants. A special fish barrier dam was built to lead salmon and steelhead, returning to spawn, into the Feather River Fish Hatchery.

Water released from Lake Oroville is used to produce electricity by Hyatt Powerplant, located in the bedrock beneath Oroville Dam. Water can either enter the Feather River through the one-unit Thermalito Diversion Dam Powerplant and the Diversion Dam's 14 radial spill gates or up to 17,000 cu ft/s (480 m3/s) can be diverted into the Thermalito Power Canal.

From there the water enters the Thermalito Power Canal and flows into Thermalito Forebay. At the end of the forebay, water enters the Thermalito Afterbay by way of the Thermalito Pumping-Generating Plant to produce electricity. The plant can also pump water back to the lake to be reused for power generation at Hyatt Powerplant.


Lake Oroville

Lake Oroville is the second largest reservoir in California, and stores winter and spring runoff which is released into the Feather River at controlled intervals to meet the Project's needs. It also provides pumped-storage capacity, 750,000 acre feet (930,000,000 m3) of flood control storage, recreation, and freshwater releases to control salinity intrusion in the Sacramento-San Joaquin Delta and for fish and wildlife protection. The Lake is perhaps the most important of all the Oroville Complex facilities, being that it serves as the headwater of the entire State Water Project.

Oroville Dam and spillway

The Oroville Dam, at 770 feet (230 m) tall, is the tallest dam in the United States and was constructed from 1961 to 1968/69.

Edward Hyatt Power Plant

Located in rock in the left abutment near the axis of Oroville Dam, Edward Hyatt Powerplant is an underground, hydroelectric, pumping-generating facility. Construction of the plant began in 1964 and was completed in 1967.

Hyatt Powerplant maximizes power production through a pumped-storage operation where water, released for power in excess of local and downstream requirements, is returned to storage in Lake Oroville during off-peak periods and is used for generation during peak power demands. Water from the lake is conveyed to the units through penstocks and branch lines. After passing through the units, water is discharged through the draft tubes to one free surface and one full-flow tailrace tunnel.

The facility was named for Edward Hyatt, who was State Engineer (1927-1950) of the Division of Water Resources under the Department of Public Works. The Division was the predecessor to the Department of Water Resources.

Thermalito Diversion Pool

The Thermalito Diversion Pool, in tandem with the Diversion Dam, serves to create a tailwater pool for Hyatt Powerplant, just around the bend to the East, at the base of Oroville Dam.. The Diversion Pool also acts as a forebay when Hyatt Powerplant is pumping water back into Lake Oroville, as well as provides recreation opportunities.

Thermalito Diversion Dam

Sitting at the South end of, (and impounding), the Diversion Pool reservoir, the Thermalito Diversion dam can either divert water west-ward into the Thermalito Power Canal for power generation at Thermalito Pumping-Generating Plant at the tail end of the Thermalito Forebay, or can release flow straight through, south, into the Feather River. The Diversion Dam is 143' feet tall and has a crest length of 1,300' feet.

Thermalito Diversion Dam Powerplant

The Thermalito Diversion Dam Powerplant is located at the Thermalito Diversion Dam below the left abutment of the dam. The powerplant generates electricity from water released to the Feather River to maintain fish habitat between the diversion dam and Thermalito Afterbay river outlet. It was constructed in 1985 and was completed in 1987. The power plant has 1 generating unit with an installed capacity of 3.3 Megavolt amperes, 615 cu ft/s (17.4 m3/s).

Thermalito Power Canal

The Thermalito Power Canal is a 10,000-foot-long (3,000 m) east–west oriented concrete lined canal that extends from a headworks structure, which is part of Thermalito Diversion Dam, to the Thermalito Forebay. It conveys water in either direction between Thermalito Diversion Dam and Thermalito Forebay for pumping and power generation at Hyatt Powerplant and Thermalito Pumping-Generating Plant. Construction on the canal began in 1965 and was completed in 1967. The Power Canal has a maximum generating flow of 16,900 cu ft/s (480 m3/s) with a maximum pumping flow of 9,000 cu ft/s (250 m3/s).

Thermalito Forebay

Thermalito Forebay is an offstream reservoir contained by the Thermalito Forebay Dam on the east and south and by Campbell Hills on the north and west. It is located about four miles (6 km) west of Oroville. The forebay conveys generating and pumping flows between Thermalito Power Canal and Thermalito Powerplant, provides regulatory storage and surge damping for the Hyatt-Thermalito power complex, and serves as a recreational area. The Thermalito Forebay has a maximum operating storage of 11,770 acre feet (14,520,000 m3), a water surface area of 630 acres (2.5 km2) at maximum storage, and a shoreline of 10 miles (at maximum operating storage). Construction on the Forebay began in 1965 and was completed in 1968.

Forebay Pumping-Generating Power Plant

Thermalito Pumping-Generating Plant is a principal feature of the Oroville-Thermalito pumped storage power complex. A pumping-generating plant, the facility is operated in tandem with Thermalito Diversion Dam Powerplant and Hyatt Powerplant to produce power. Water released for power in excess of local and downstream requirements is conserved by pumpback operation during off-peak hours through both power plants into Lake Oroville to be subsequently released for power generation during periods of peak power demand. The Plant has 4 units: 1 generating unit and 3 pumping-generating units, with an installed capacity of 120 Megavolt amperes, 17,400 cu ft/s (490 m3/s). Construction on the Plant began in 1964 and was completed in 1969, however, operations at the plant started a year prior to completion, in 1968.

Thermalito Afterbay

The Thermalito Afterbay is a significantly larger reservoir than that of the Forebay, and sits just 2 miles (3.2 km) south-west of the tail end of the Forebay, with only a 9,100-foot-long (2,800 m) canal connecting them. The Afterbay provides storage for the water required by the pumpback operation to Lake Oroville, helps regulate the power system, produces controlled flow in the Feather River downstream from the Oroville-Thermalito facilities, and provides recreation to the area. It also serves as a warming basin for agricultural water delivery to the numerous rice and grain fields just west of the Afterbay. The Afterbay has a maximum operating storage of 57,040 acre feet (70,360,000 m3), a water surface area of 4,300 acres (17 km2) at max. storage, and a shoreline of 26 miles (at max. operating storage). Also, at 42,000 feet (13,000 m) long, Thermalito Afterbay Dam is the longest crest in the California State Water Parks system. Construction on the Afterbay began in 1965 and was completed in 1968.

Fish Barrier Dam

The Barrier Dam, located right next to and just upstream of the Feather River Fish Hatchery, serves to divert fish away from the mainstream and into a fish ladder that leads to the hatchery. Flows at the Barrier Dam are controlled by releases at the Oroville Dam Spillway and Thermalito Diversion Dam. The Barrier Dam prevents the fish from entering the lake and guides them to the fish ladder. The Barrier Dam is 91 feet (28 m) tall and has a crest length of 600 feet (180 m). The Dam was constructed in 1962 and completed in 1964.

Feather River Fish Hatchery

The Feather River Fish Hatchery was built to compensate for spawning grounds lost to returning salmon and Steelhead trout with the construction of Oroville Dam in the early 1960s. Salmon and steelhead raised at the hatchery are transported in oxygenated, temperature-controlled tanks and released in the Feather and Sacramento Rivers, Lake Oroville, and/or in the Delta near the San Francisco Bay area. These fish account for an estimated 20 percent of the ocean sport and commercial catch in the Pacific Ocean. Hatchery salmon are also planted in Lake Oroville. The first salmon and steelhead entered the hatchery in September 1967. Today, the facility accommodates an average 8,000 fish. The Feather River Fish Hatchery was constructed between 1966 and 1967.

See also

Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Oroville Dam — View of Oroville Dam from the air. The main dam is to the right and the spillway is to the left; the Thermalito Diversion Pool is in the midground Location Butte County, California Coordinates …   Wikipedia

  • Concow, California — Concow   census designated place   Location in …   Wikipedia

  • List of school districts in California — Also available: Lists of school districts in California by countyCalifornia’s public education system is huge: 6,286,943 students in 9,674 schools, which are governed by 1,052 school boards and regulated by a complex Education Code. [ [http://www …   Wikipedia