- Critical exponent
Critical exponents describe the behaviour of physical quantities near continuous phase transitions. It is believed, though not proven, that they are universal, i.e. they do not depend on the details of the physical system, but only on
- the dimension of the system,
- the range of the interaction,
- the spin dimension.
These properties of critical exponents are supported by experimental data. The experimental results can be theoretically achieved in mean field theory for higher-dimensional systems (4 or more dimensions). The theoretical treatment of lower-dimensional systems (1 or 2 dimensions) is more difficult and requires the renormalization group. Phase transitions and critical exponents appear also in percolation systems.
Phase transitions occur at a certain temperature, called the critical temperature Tc. We want to describe the behaviour of a physical quantity f in terms of a power law around the critical temperature. So we introduce the reduced temperature τ: = (T − Tc) / Tc, which is zero at the phase transition, and define the critical exponent k.
This results in the power law we were looking for.
It is important to remember that this only represents the asymptotic behavior of the function f(τ) as .
More generally one might expect
The most important critical exponents
Above and below Tc the system has two different phases characterized by an order parameter Ψ, which vanishes at and above Tc.
Let us consider the disordered phase (τ > 0), ordered phase (τ < 0 ) and critical temperature (τ = 0) phases separately. Following the standard convention, the critical exponents related to the ordered phase are primed. It's also another standard convention to use the super/subscript +(-) for the disordered(ordered) state. We have spontaneous symmetry breaking in the ordered phase. So, we will arbitrarily take any solution in the phase.
Keys Ψ order parameter ( for the liquid-gas critical point, magnetization for the Curie point,etc.) τ f specific free energy C specific heat; J source field (e.g. where P is the pressure and Pc the critical pressure for the liquid-gas critical point, reduced chemical potential, the magnetic field H for the Curie point ) χ the susceptibility/compressibility/etc.; ξ correlation length d the number of spatial dimensions the correlation function r spatial distance
The following entries are evaluated at J = 0 (except for the δ entry)
Critical exponents for τ > 0 (disordered phase) Greek letter relation α γ ν Critical exponents for τ < 0 (ordered phase) Greek letter relation β Critical exponents for τ = 0 δ η
The critical exponents can be derived from the specific free energy f(J,T) as a function of the source and temperature. The correlation length can be derived from the functional F[J;T].
These relations are accurate close to the critical point in two- and three-dimensional systems. In four dimensions, however, the power laws are modified by logarithmic factors. This problem does not appear in 3.99 dimensions, though.
Mean field theory
If we add derivative terms turning it into a mean field Ginzburg–Landau theory, we get
One of the major discoveries in the study of critical points is that mean field theory is completely wrong in the vicinity of critical points in two and three dimensions. In four dimensions, we have logarithmic corrections.
The most accurately measured value of α is −0.0127 for the phase transition of superfluid helium (the so-called lambda transition). The value was measured in a satellite to minimize pressure differences in the sample (see here). This result agrees with theoretical prediction obtained by variational perturbation theory (see here or here).
In light of the critical scalings, we can reexpress all thermodynamic quantities in terms of dimensionless quantities. Close enough to the critical point, everything can be reexpressed in terms of certain ratios of the powers of the reduced quantities. These are the scaling functions.
The origin of scaling functions can be seen from the renormalization group. The critical point is an infrared fixed point. In a sufficiently small neighborhood of the critical point, we may linearize the action of the renormalization group. This basically means that rescaling the system by a factor of a will be equivalent to rescaling operators and source fields by a factor of aΔ for some Δ. So, we may reparameterize all quantities in terms of rescaled scale independent quantities.
Thus, the exponents above and below the critical temperature, respectively, have identical values. This is understandable, since the respective scaling functions, , originally defined for , should become identical if extrapolated to
Critical exponents are denoted by Greek letters. They fall into universality classes and obey scaling relations such as
and a lot of similar relations, which implies that there are only two independent exponents, e.g., and . All this follows from the theory of the renormalization group.
There are some anisotropic systems where the correlation length is direction dependent.
More complex behaviour may occur at multicritical points, at the border or on intersections of critical manifolds.
Static versus dynamic properties
The above examples exclusively refer to the static properties of a critical system. However dynamic properties of the system may become critical, too. Especially, the characteristic time, τchar, of a system diverges as , with a dynamical exponent z. Moreover, the large static universality classes of equivalent models with identical static critical exponents decompose into smaller dynamical universality classes, if one demands that also the dynamical exponents are identical.
The critical exponents can be computed from conformal field theory.
See also anomalous scaling dimension.
Critical exponents also exist for transport quantities like viscosity and heat conductivity.
Critical exponents also exist for self organized criticality for dissipative systems.
Phase transitions and critical exponents appear also in percolation processes where the concentration of occupied sites or links play the role of temperature.
- Hagen Kleinert and Verena Schulte-Frohlinde, Critical Properties of φ4-Theories, World Scientific (Singapore, 2001); Paperback ISBN 981-02-4658-7 (Read online at )
- Toda, M., Kubo, R., N. Saito, Statistical Physics I, Springer-Verlag (Berlin, 1983); Hardcover ISBN 3-540-11460-2
- J.M.Yeomans, Statistical Mechanics of Phase Transitions, Oxford Clarendon Press
- H. E. Stanley Introduction to Phase Transitions and Critical Phenomena, Oxford University Press, 1971
- A. Bunde and S. Havlin (editors), Fractals in Science, Springer, 1995
- A. Bunde and S. Havlin (editors), Fractals and Disordered Systems, Springer, 1996
Wikimedia Foundation. 2010.
См. также в других словарях:
Critical phenomena — In physics, critical phenomena is the collective name associated with the physics of critical points. Most of them stem from the divergence of the correlation length, but also the dynamics slows down. Critical phenomena include scaling relations… … Wikipedia
Critical temperature — The critical temperature, Tc, of a material is the temperature above which distinct liquid and gas phases do not exist. As the critical temperature is approached, the properties of the gas and liquid phases become the same resulting in only one… … Wikipedia
Critical dimension — For the minimum feature size in photolithography, see Photolithography. In the renormalization group analysis of phase transitions in physics, a critical dimension is the dimensionality of space at which the character of the phase transition… … Wikipedia
Purdue Exponent — Infobox Newspaper name = caption = The January 20, 2006 front page of The Exponent type = Daily independent student newspaper format = Broadsheet foundation = 1889 owners = Purdue Student Publishing Foundation headquarters = 460 Northwestern… … Wikipedia
Kritischer Exponent — Kritische Exponenten werden in der Theorie der kontinuierlichen Phasenübergänge zur Beschreibung des Verhaltens eines physikalischen Systems in der Nähe des kritischen Punktes und zur Klassifizierung des Phasenüberganges in Universalitätsklassen… … Deutsch Wikipedia
Power law — A power law is any polynomial relationship that exhibits the property of scale invariance. The most common power laws relate two variables and have the form:f(x) = ax^k! +o(x^k),where a and k are constants, and o(x^k) is of x. Here, k is… … Wikipedia
Phase transition — This diagram shows the nomenclature for the different phase transitions. A phase transition is the transformation of a thermodynamic system from one phase or state of matter to another. A phase of a thermodynamic system and the states of matter… … Wikipedia
Scale invariance — In physics and mathematics, scale invariance is a feature of objects or laws that do not change if length scales (or energy scales) are multiplied by a common factor. The technical term for this transformation is a dilatation (also known as… … Wikipedia
Conductivity near the percolation threshold — In a mixture between a dielectric and a metallic component, the conductivity σ and the dielectric constant ε of this mixture show a critical behavior if the fraction of the metallic component reaches the percolation threshold. The behavior of… … Wikipedia
Universality (dynamical systems) — In statistical mechanics, universality is the observation that there are properties for a large class of systems that are independent of the dynamical details of the system. Systems that display universality tend to be chaotic and often have a… … Wikipedia