Software flow control

Software flow control

Software flow control is a method of flow control used in computer data links, especially RS-232 serial. It uses special codes, transmitted in-band, over the primary communications channel. These codes are generally called XOFF and XON (from "transmit off" and "on", respectively). Thus, "software flow control" is sometimes called "XON/XOFF flow control". This is in contrast to flow control via dedicated out-of-band signals — "hardware flow control" — such as RTS/CTS.

Representation

For systems using the ASCII character code, XOFF is generally represented using a character or byte with value 19; XON with value 17.

The ASCII standard does not specify any control characters for use as XON/XOFF specifically. However, it does provide four generic "device control" characters (DC1 through DC4). The seminal ASR-33 Teletype adopted two of these, DC3 and DC1, for use as XOFF and XON, respectively. This usage was copied by others, and is now a de facto standard. The keyboard equivalents of CTRL+S for XOFF, and CTRL+Q for XON, also derive from this usage.

Mechanism

When one end of a data link is unable to accept any more data (or approaching that point), it sends XOFF to the other end. The other end receives the XOFF code, and suspends transmission. Once the first end is ready to accept data again, it sends XON, and the other end resumes transmission.

For example, imagine a computer connected to a slow printer. The computer starts sending data to the printer. Since the computer is faster than the printer, the printer falls behind, and starts to be overwhelmed by the data. The printer thus sends XOFF to the computer. The software on the computer "sees" the XOFF, and temporarily stops sending data. Once the printer has "caught up", it sends XON to the computer. The computer sees XON, and starts sending data again.

XOFF/XON can be employed in both directions -- for example, two teleprinters connected to each other.

Comparison with hardware flow control

The principal advantage of software flow control is the reduction in the number of electrical conductors between sender and receiver. Given a common ground, only two signals are needed, one to send and the other to receive. Hardware flow control requires additional wires between the two devices. It also requires specific hardware implementation, which had more significant costs in earlier days of computing (i.e., 1960s and 70s).

However, software flow control is not without its problems. Sending XOFF requires at least one character time to transmit, and may be queued behind already-transmitted data still in buffers. Hardware signals may be asserted almost instantaneously, and out-of-order.

As the name "software flow control" implies, flow control using this method is usually implemented in software (or at least a higher level of firmware), which can cause further delays in XOFF response. Hardware flow control is typically under the direct control of the transmitting UART, which is able to cease transmission immediately, without the intervention of higher levels.

Finally, since the XOFF/XON codes are sent in-band, they cannot appear in the data being transmitted without being mistaken for flow control commands. Any data containing the XOFF/XON codes thus must be encoded in some manner for proper transmission, with corresponding overhead. This is frequently done with some kind of escape sequence.

Applications

Software flow control is used extensively by low-speed devices, especially older printers and dumb terminals, to indicate they are temporarily unable to accept more data. Typically, this is due to a combination of limited output rate and any buffers being full. Some terminal control packages, such as termcap, employ "padding" to allow such equipment sufficient time to perform the requested actions without the need to assert XOFF.

XOFF/XON are still sometimes used manually by computer operators, to pause and restart output which otherwise would scroll off the display too quickly.

Terminal emulator software generally implements XOFF/XON support as a basic function. This generally includes the system console on modern Unix and Linux machines, as well as GUI emulators such as xterm and the Win32 console.

References

* [http://docs.hp.com/en/32022-90051/ch09s08.html How to control the flow of data: The XON/XOFF protocol] . In: Configuring Systems for Terminals, Printers, and Other Serial Devices: HP 3000 MPE/iX Computer Systems. Hewlett-Packard Company.


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • Flow control — distinguish|control flowIn computer networking, flow control is the process of managing the rate of data transmission between two nodes to prevent a fast sender from over running a slow receiver. This should be distinguished from congestion… …   Wikipedia

  • Flow Control — Mit Datenflusskontrolle (engl. data flow control) oder Datenflusssteuerung werden unterschiedliche Verfahren bezeichnet, mit denen die Datenübertragung von Endgeräten an einem Datennetz, die nicht synchron arbeiten, so gesteuert wird, dass eine… …   Deutsch Wikipedia

  • flow control —    1. In communications, control of the rate at which information is exchanged between two computers over a transmission channel. Flow control is needed when one of the devices cannot receive the information at the same rate as it can be sent,… …   Dictionary of networking

  • Control valves — are valves used to control conditions such as flow, pressure, temperature, and liquid level by fully or partially opening or closing in response to signals received from controllers that compare a setpoint to a process variable whose value is… …   Wikipedia

  • Control flow — Not to be confused with Flow control. In computer science, control flow (or alternatively, flow of control) refers to the order in which the individual statements, instructions, or function calls of an imperative or a declarative program are… …   Wikipedia

  • Software-Protokoll — Mit Datenflusskontrolle (engl. data flow control) oder Datenflusssteuerung werden unterschiedliche Verfahren bezeichnet, mit denen die Datenübertragung von Endgeräten an einem Datennetz, die nicht synchron arbeiten, so gesteuert wird, dass eine… …   Deutsch Wikipedia

  • Control character — In computing and telecommunication, a control character or non printing character is a code point (a number) in a character set, that does not in itself represent a written symbol. It is in band signaling in the context of character encoding. All …   Wikipedia

  • Flow (psychology) — Flow is the mental state of operation in which the person is fully immersed in what he or she is doing by a feeling of energized focus, full involvement, and success in the process of the activity. Proposed by positive psychologist Mihály… …   Wikipedia

  • Control logic — is a key part of a software program that controls the operations of the program. The control logic responds to commands from the user, and it also acts on its own to perform automated tasks that have been structured into the program. [1] Model of …   Wikipedia

  • CONTROL-M — is batch scheduling software produced by BMC Software, originally written for mainframes but also available for distributed computing platforms including Unix, Windows, Linux and OpenVMS environments. BMC Software claims that CONTROL M is the… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”