Igneous rock

Igneous rock
Geologic provinces of the world (USGS)
  Shield
  Orogen
  Basin
  Extended crust
Oceanic crust:
  0–20 Ma
  20–65 Ma
  >65 Ma

Igneous rock (derived from the Latin word igneus meaning of fire, from ignis meaning fire) is one of the three main rock types, the others being sedimentary and metamorphic rock. Igneous rock is formed through the cooling and solidification of magma or lava. Igneous rock may form with or without crystallization, either below the surface as intrusive (plutonic) rocks or on the surface as extrusive (volcanic) rocks. This magma can be derived from partial melts of pre-existing rocks in either a planet's mantle or crust. Typically, the melting is caused by one or more of three processes: an increase in temperature, a decrease in pressure, or a change in composition. Over 700 types of igneous rocks have been described, most of them having formed beneath the surface of Earth's crust. These have diverse properties, depending on their composition and how they were formed.

Contents

Geological significance

The upper 16 kilometres (10 mi) of Earth's crust is composed of approximately 95% igneous rocks with only a thin, widespread covering of sedimentary and metamorphic rocks.[1]

Igneous rocks are geologically important because:

  • their minerals and global chemistry give information about the composition of the mantle, from which some igneous rocks are extracted, and the temperature and pressure conditions that allowed this extraction, and/or of other pre-existing rock that melted;
  • their absolute ages can be obtained from various forms of radiometric dating and thus can be compared to adjacent geological strata, allowing a time sequence of events;
  • their features are usually characteristic of a specific tectonic environment, allowing tectonic reconstitutions (see plate tectonics);
  • in some special circumstances they host important mineral deposits (ores): for example, tungsten, tin, and uranium are commonly associated with granites and diorites, whereas ores of chromium and platinum are commonly associated with gabbros.

Morphology and setting

In terms of modes of occurrence, igneous rocks can be either intrusive (plutonic), extrusive (volcanic) or hypabyssal.

Intrusive igneous rocks

Close-up of granite (an intrusive igneous rock) exposed in Chennai, India.

Intrusive igneous rocks are formed from magma that cools and solidifies within the crust of a planet. Surrounded by pre-existing rock (called country rock), the magma cools slowly, and as a result these rocks are coarse grained. The mineral grains in such rocks can generally be identified with the naked eye. Intrusive rocks can also be classified according to the shape and size of the intrusive body and its relation to the other formations into which it intrudes. Typical intrusive formations are batholiths, stocks, laccoliths, sills and dikes.

The central cores of major mountain ranges consist of intrusive igneous rocks, usually granite. When exposed by erosion, these cores (called batholiths) may occupy huge areas of the Earth's surface.

Coarse grained intrusive igneous rocks which form at depth within the crust are termed as abyssal; intrusive igneous rocks which form near the surface are termed hypabyssal.

Extrusive igneous rocks

Basalt (an extrusive igneous rock in this case); light coloured tracks show the direction of lava flow.

Extrusive igneous rocks are formed at the crust's surface as a result of the partial melting of rocks within the mantle and crust. Extrusive Igneous rocks cool and solidify quicker than intrusive igneous rocks. Since the rocks cool very quickly they are fine grained.

The melted rock, with or without suspended crystals and gas bubbles, is called magma. Magma rises because it is less dense than the rock from which it was created. When it reaches the surface, magma extruded onto the surface either beneath water or air, is called lava. Eruptions of volcanoes into air are termed subaerial whereas those occurring underneath the ocean are termed submarine. Black smokers and mid-ocean ridge basalt are examples of submarine volcanic activity.

The volume of extrusive rock erupted annually by volcanoes varies with plate tectonic setting. Extrusive rock is produced in the following proportions:[2]

Magma which erupts from a volcano behaves according to its viscosity, determined by temperature, composition, and crystal content. High-temperature magma, most of which is basaltic in composition, behaves in a manner similar to thick oil and, as it cools, treacle. Long, thin basalt flows with pahoehoe surfaces are common. Intermediate composition magma such as andesite tends to form cinder cones of intermingled ash, tuff and lava, and may have viscosity similar to thick, cold molasses or even rubber when erupted. Felsic magma such as rhyolite is usually erupted at low temperature and is up to 10,000 times as viscous as basalt. Volcanoes with rhyolitic magma commonly erupt explosively, and rhyolitic lava flows typically are of limited extent and have steep margins, because the magma is so viscous.

Felsic and intermediate magmas that erupt often do so violently, with explosions driven by release of dissolved gases — typically water but also carbon dioxide. Explosively erupted pyroclastic material is called tephra and includes tuff, agglomerate and ignimbrite. Fine volcanic ash is also erupted and forms ash tuff deposits which can often cover vast areas.

Because lava cools and crystallizes rapidly, it is fine grained. If the cooling has been so rapid as to prevent the formation of even small crystals after extrusion, the resulting rock may be mostly glass (such as the rock obsidian). If the cooling of the lava happened slowly, the rocks would be coarse-grained.

Because the minerals are mostly fine-grained, it is much more difficult to distinguish between the different types of extrusive igneous rocks than between different types of intrusive igneous rocks. Generally, the mineral constituents of fine-grained extrusive igneous rocks can only be determined by examination of thin sections of the rock under a microscope, so only an approximate classification can usually be made in the field.

Hypabyssal igneous rocks

Hypabyssal igneous rocks are formed at a depth in between the plutonic and volcanic rocks. Hypabyssal rocks are less common than plutonic or volcanic rocks and do often form dikes, sills or laccoliths.

Classification

Igneous rocks are classified according to mode of occurrence, texture, mineralogy, chemical composition, and the geometry of the igneous body.

The classification of the many types of different igneous rocks can provide us with important information about the conditions under which they formed. Two important variables used for the classification of igneous rocks are particle size, which largely depends upon the cooling history, and the mineral composition of the rock. Feldspars, quartz or feldspathoids, olivines, pyroxenes, amphiboles, and micas are all important minerals in the formation of almost all igneous rocks, and they are basic to the classification of these rocks. All other minerals present are regarded as nonessential in almost all igneous rocks and are called accessory minerals. Types of igneous rocks with other essential minerals are very rare, and these rare rocks include those with essential carbonates.

In a simplified classification, igneous rock types are separated on the basis of the type of feldspar present, the presence or absence of quartz, and in rocks with no feldspar or quartz, the type of iron or magnesium minerals present. Rocks containing quartz (silica in composition) are silica-oversaturated. Rocks with feldspathoids are silica-undersaturated, because feldspathoids cannot coexist in a stable association with quartz.

Igneous rocks which have crystals large enough to be seen by the naked eye are called phaneritic; those with crystals too small to be seen are called aphanitic. Generally speaking, phaneritic implies an intrusive origin; aphanitic an extrusive one.

An igneous rock with larger, clearly discernible crystals embedded in a finer-grained matrix is termed porphyry. Porphyritic texture develops when some of the crystals grow to considerable size before the main mass of the magma crystallizes as finer-grained, uniform material.

We will classify igneous rocks on the basis of texture and composition. Texture refers to the size, shape and arrangement of the mineral grains or crystals of which the rock is composed.

Texture

Gabbro specimen showing phaneritic texture; Rock Creek Canyon, eastern Sierra Nevada, California; scale bar is 2.0 cm.

Texture is an important criterion for the naming of volcanic rocks. The texture of volcanic rocks, including the size, shape, orientation, and distribution of mineral grains and the intergrain relationships, will determine whether the rock is termed a tuff, a pyroclastic lava or a simple lava.

However, the texture is only a subordinate part of classifying volcanic rocks, as most often there needs to be chemical information gleaned from rocks with extremely fine-grained groundmass or from airfall tuffs, which may be formed from volcanic ash.

Textural criteria are less critical in classifying intrusive rocks where the majority of minerals will be visible to the naked eye or at least using a hand lens, magnifying glass or microscope. Plutonic rocks tend also to be less texturally varied and less prone to gaining structural fabrics. Textural terms can be used to differentiate different intrusive phases of large plutons, for instance porphyritic margins to large intrusive bodies, porphyry stocks and subvolcanic dikes (apophyses). Mineralogical classification is used most often to classify plutonic rocks. Chemical classifications are preferred to classify volcanic rocks, with phenocryst species used as a prefix, e.g. "olivine-bearing picrite" or "orthoclase-phyric rhyolite".

Basic classification scheme for igneous rocks on their mineralogy. If the approximate volume fractions of minerals in the rock are known the rock name and silica content can be read off the diagram. This is not an exact method because the classification of igneous rocks also depends on other components than silica, yet in most cases it is a good first guess.

Chemical classification

Igneous rocks can be classified according to chemical or mineralogical parameters:

Chemical: total alkali-silica content (TAS diagram) for volcanic rock classification used when modal or mineralogic data is unavailable:

  • felsic igneous rocks containing a high silica content, greater than 63% SiO2 (examples granite and rhyolite)
  • intermediate igneous rocks containing between 52 - 63% SiO2 (example andesite and dacite)
  • mafic igneous rocks have low silica 45 - 52% and typically high iron - magnesium content (example gabbro and basalt)
  • ultramafic rock igneous rocks with less than 45% silica. (examples picrite, komatiite and peridotite)
  • alkalic igneous rocks with 5 - 15% alkali (K2O + Na2O) content or with a molar ratio of alkali to silica greater than 1:6. (examples phonolite and trachyte)

Chemical classification also extends to differentiating rocks which are chemically similar according to the TAS diagram, for instance;

  • Ultrapotassic; rocks containing molar K2O/Na2O >3
  • Peralkaline; rocks containing molar (K2O + Na2O)/ Al2O3 >1
  • Peraluminous; rocks containing molar (K2O + Na2O)/ Al2O3 <1

An idealized mineralogy (the normative mineralogy) can be calculated from the chemical composition, and the calculation is useful for rocks too fine-grained or too altered for identification of minerals that crystallized from the melt. For instance, normative quartz classifies a rock as silica-oversaturated; an example is rhyolite. A normative feldspathoid classifies a rock as silica-undersaturated; an example is nephelinite.

History of classification

In 1902 a group of American petrographers proposed that all existing classifications of igneous rocks should be discarded and replaced by a "quantitative" classification based on chemical analysis. They showed how vague and often unscientific was much of the existing terminology and argued that as the chemical composition of an igneous rock was its most fundamental characteristic it should be elevated to prime position.

Geological occurrence, structure, mineralogical constitution—the hitherto accepted criteria for the discrimination of rock species—were relegated to the background. The completed rock analysis is first to be interpreted in terms of the rock-forming minerals which might be expected to be formed when the magma crystallizes, e.g., quartz feldspars, olivine, akermannite, feldspathoids, magnetite, corundum and so on, and the rocks are divided into groups strictly according to the relative proportion of these minerals to one another.[3][4]

Mineralogical classification

For volcanic rocks, mineralogy is important in classifying and naming lavas. The most important criterion is the phenocryst species, followed by the groundmass mineralogy. Often, where the groundmass is aphanitic, chemical classification must be used to properly identify a volcanic rock.

Mineralogic contents - felsic versus mafic

  • felsic rock, highest content of silicon, with predominance of quartz, alkali feldspar and/or feldspathoids: the felsic minerals; these rocks (e.g., granite, rhyolite) are usually light coloured, and have low density.
  • mafic rock, lesser content of silicon relative to felsic rocks, with predominance of mafic minerals pyroxenes, olivines and calcic plagioclase; these rocks (example, basalt, gabbro) are usually dark coloured, and have a higher density than felsic rocks.
  • ultramafic rock, lowest content of silicon, with more than 90% of mafic minerals (e.g., dunite).

For intrusive, plutonic and usually phaneritic igneous rocks where all minerals are visible at least via microscope, the mineralogy is used to classify the rock. This usually occurs on ternary diagrams, where the relative proportions of three minerals are used to classify the rock.

The following table is a simple subdivision of igneous rocks according both to their composition and mode of occurrence.

Composition
Mode of occurrence Felsic Intermediate Mafic Ultramafic
Intrusive Granite Diorite Gabbro Peridotite
Extrusive Rhyolite Andesite Basalt Komatiite
Essential rock forming silicates
Felsic Intermediate Mafic Ultramafic
Coarse Grained Granite Diorite Gabbro Peridotite
Medium Grained Diabase
Fine Grained Rhyolite Andesite Basalt Komatiite

For a more detailed classification see QAPF diagram.

Example of classification

Granite is an igneous intrusive rock (crystallized at depth), with felsic composition (rich in silica and predominately quartz plus potassium-rich feldspar plus sodium-rich plagioclase) and phaneritic, subeuhedral texture (minerals are visible to the unaided eye and commonly some of them retain original crystallographic shapes).

Magma origination

The Earth's crust averages about 35 kilometers thick under the continents, but averages only some 7-10 kilometers beneath the oceans. The continental crust is composed primarily of sedimentary rocks resting on crystalline basement formed of a great variety of metamorphic and igneous rocks including granulite and granite. Oceanic crust is composed primarily of basalt and gabbro. Both continental and oceanic crust rest on peridotite of the mantle.

Rocks may melt in response to a decrease in pressure, to a change in composition such as an addition of water, to an increase in temperature, or to a combination of these processes.

Other mechanisms, such as melting from impact of a meteorite, are less important today, but impacts during accretion of the Earth led to extensive melting, and the outer several hundred kilometers of our early Earth probably was an ocean of magma. Impacts of large meteorites in last few hundred million years have been proposed as one mechanism responsible for the extensive basalt magmatism of several large igneous provinces.

Decompression

Decompression melting occurs because of a decrease in pressure.[5] The solidus temperatures of most rocks (the temperatures below which they are completely solid) increase with increasing pressure in the absence of water. Peridotite at depth in the Earth's mantle may be hotter than its solidus temperature at some shallower level. If such rock rises during the convection of solid mantle, it will cool slightly as it expands in an adiabatic process, but the cooling is only about 0.3°C per kilometer. Experimental studies of appropriate peridotite samples document that the solidus temperatures increase by 3°C to 4°C per kilometer. If the rock rises far enough, it will begin to melt. Melt droplets can coalesce into larger volumes and be intruded upwards. This process of melting from upward movement of solid mantle is critical in the evolution of the Earth.

Decompression melting creates the ocean crust at mid-ocean ridges. It also causes volcanism in intraplate regions such as Europe, Africa and the Pacific sea floor. There, it is variously attributed either to the rise of mantle plumes (the "Plume hypothesis") or to intraplate extension (the "Plate hypothesis").[6]

Effects of water and carbon dioxide

The change of rock composition most responsible for creation of magma is the addition of water. Water lowers the solidus temperature of rocks at a given pressure. For example, at a depth of about 100 kilometers, peridotite begins to melt near 800°C in the presence of excess water, but near or above about 1500°C in the absence of water.[7] Water is driven out of the oceanic lithosphere in subduction zones, and it causes melting in the overlying mantle. Hydrous magmas of basalt and andesite composition are produced directly and indirectly as results of dehydration during the subduction process. Such magmas and those derived from them build up island arcs such as those in the Pacific Ring of Fire. These magmas form rocks of the calc-alkaline series, an important part of continental crust.

The addition of carbon dioxide is relatively a much less important cause of magma formation than addition of water, but genesis of some silica-undersaturated magmas has been attributed to the dominance of carbon dioxide over water in their mantle source regions. In the presence of carbon dioxide, experiments document that the peridotite solidus temperature decreases by about 200°C in a narrow pressure interval at pressures corresponding to a depth of about 70 km. At greater depths, carbon dioxide can have more effect: at depths to about 200 km, the temperatures of initial melting of a carbonated peridotite composition were determined to be 450°C to 600°C lower than for the same composition with no carbon dioxide.[8] Magmas of rock types such as nephelinite, carbonatite, and kimberlite are among those that may be generated following an influx of carbon dioxide into mantle at depths greater than about 70 km.

Temperature increase

Increase of temperature is the most typical mechanism for formation of magma within continental crust. Such temperature increases can occur because of the upward intrusion of magma from the mantle. Temperatures can also exceed the solidus of a crustal rock in continental crust thickened by compression at a plate boundary. The plate boundary between the Indian and Asian continental masses provides a well-studied example, as the Tibetan Plateau just north of the boundary has crust about 80 kilometers thick, roughly twice the thickness of normal continental crust. Studies of electrical resistivity deduced from magnetotelluric data have detected a layer that appears to contain silicate melt and that stretches for at least 1000 kilometers within the middle crust along the southern margin of the Tibetan Plateau.[9] Granite and rhyolite are types of igneous rock commonly interpreted as products of melting of continental crust because of increases of temperature. Temperature increases also may contribute to the melting of lithosphere dragged down in a subduction zone.

Magma evolution

Schematic diagrams showing the principles behind fractional crystallisation in a magma. While cooling, the magma evolves in composition because different minerals crystallize from the melt. 1: olivine crystallizes; 2: olivine and pyroxene crystallize; 3: pyroxene and plagioclase crystallize; 4: plagioclase crystallizes. At the bottom of the magma reservoir, a cumulate rock forms.

Most magmas only entirely melt for small parts of their histories. More typically, they are mixes of melt and crystals, and sometimes also of gas bubbles. Melt, crystals, and bubbles usually have different densities, and so they can separate as magmas evolve.

As magma cools, minerals typically crystallize from the melt at different temperatures (fractional crystallization). As minerals crystallize, the composition of the residual melt typically changes. If crystals separate from melt, then the residual melt will differ in composition from the parent magma. For instance, a magma of gabbroic composition can produce a residual melt of granitic composition if early formed crystals are separated from the magma. Gabbro may have a liquidus temperature near 1200°C, and derivative granite-composition melt may have a liquidus temperature as low as about 700°C. Incompatible elements are concentrated in the last residues of magma during fractional crystallization and in the first melts produced during partial melting: either process can form the magma that crystallizes to pegmatite, a rock type commonly enriched in incompatible elements. Bowen's reaction series is important for understanding the idealised sequence of fractional crystallisation of a magma.

Magma composition can be determined by processes other than partial melting and fractional crystallization. For instance, magmas commonly interact with rocks they intrude, both by melting those rocks and by reacting with them. Magmas of different compositions can mix with one another. In rare cases, melts can separate into two immiscible melts of contrasting compositions.

There are relatively few minerals that are important in the formation of common igneous rocks, because the magma from which the minerals crystallize is rich in only certain elements: silicon, oxygen, aluminium, sodium, potassium, calcium, iron, and magnesium. These are the elements which combine to form the silicate minerals, which account for over ninety percent of all igneous rocks. The chemistry of igneous rocks is expressed differently for major and minor elements and for trace elements. Contents of major and minor elements are conventionally expressed as weight percent oxides (e.g., 51% SiO2, and 1.50% TiO2). Abundances of trace elements are conventionally expressed as parts per million by weight (e.g., 420 ppm Ni, and 5.1 ppm Sm). The term "trace element" typically is used for elements present in most rocks at abundances less than 100 ppm or so, but some trace elements may be present in some rocks at abundances exceeding 1000 ppm. The diversity of rock compositions has been defined by a huge mass of analytical data—over 230,000 rock analyses can be accessed on the web through a site sponsored by the U. S. National Science Foundation (see the External Link to EarthChem).

Etymology

The word "igneous" is derived from the Latin ignis, meaning "of fire". Volcanic rocks are named after Vulcan, the Roman name for the god of fire.
Intrusive rocks are also called plutonic rocks, named after Pluto, the Roman god of the underworld.

See also

Notes

  1. ^ Klein, Cornelis and Cornelius S. Hurlbut, Jr., Manual of Mineralogy, Wiley, 1985, 20th ed., p 275 ISBN 0-471-80580-7
  2. ^ Fisher, R. V. & Schmincke H.-U., (1984) Pyroclastic Rocks, Berlin, Springer-Verlag
  3. ^ Cross, W. et al. (1903) Quantitative Classification of Igneous Rocks, Chicago, University of Chicago Press
  4. ^  This article incorporates text from a publication now in the public domainChisholm, Hugh, ed (1911). "Petrology". Encyclopædia Britannica (11th ed.). Cambridge University Press. [1]
  5. ^ Geoff C. Brown, C. J. Hawkesworth, R. C. L. Wilson (1992). Understanding the Earth (2nd ed.). Cambridge University Press. p. 93. ISBN 0521427401. http://books.google.com/books?id=Kgk4AAAAIAAJ&pg=PA93. 
  6. ^ Foulger, G.R. (2010). Plates vs. Plumes: A Geological Controversy. Wiley-Blackwell. ISBN 978-1-4051-6148-0. http://www.wiley.com/WileyCDA/WileyTitle/productCd-1405161485.html. 
  7. ^ T. L. Grove, N. Chatterjee, S. W. Parman, and E. Medard, (2006)The influence of H2O on mantle wedge melting. Earth and Planetary Science Letters, v. 249, p. 74-89
  8. ^ R. Dasgupta and M. M. Hirschmann (2007) Effect of variable carbonate concentration on the solidus of mantle peridotite. American Mineralogist, v. 92, p. 370-379
  9. ^ M. J. Unsworth et al. (2005) Crustal rheology of the Himalaya and Southern Tibet inferred from magnetotelluric data. Nature, v. 438, p. 78-81

References

  • R. W. Le Maitre (editor) (2002) Igneous Rocks: A Classification and Glossary of Terms, Recommendations of the International Union of Geological Sciences, Subcommission of the Systematics of Igneous Rocks., Cambridge, Cambridge University Press ISBN 0-521-66215-X

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • igneous rock — Any of various crystalline or glassy, noncrystalline rocks formed by the cooling and solidification of molten earth material (magma). Igneous rocks comprise one of the three principal classes of rocks, the others being metamorphic and sedimentary …   Universalium

  • igneous rock —    Rock formed by the cooling and solidifying of the subterranean molten mass of the earth. Examples of igneous rocks include: basalt, diorite, dolerite, granite, granodiorite, obsidian, and porphyry. Also see metamorphic rock, Mohs Scale of… …   Glossary of Art Terms

  • igneous rock —    Rock formed by cooling and solidification from magma, and that has not been changed appreciably by weathering since its formation; major varieties include plutonic (i.e., intrusive) and volcanic (i.e., extrusive) rocks. Examples: andesite,… …   Glossary of landform and geologic terms

  • igneous rock — GLOSSARY OF VOLCANIC TERMS A variety of rock formed via crystallization from a magma. The two major classes of igneous rocks are volcanic (crystallized at or near the earth s surface, for example, basalt) and plutonic (crystallized at depth… …   Glossary of volcanic terms

  • igneous rock — noun rock formed by the solidification of molten magma • Hypernyms: ↑rock, ↑stone • Hyponyms: ↑andesite, ↑aplite, ↑groundmass, ↑adesite, ↑batholith, ↑ba …   Useful english dictionary

  • igneous rock — /ɪgniəs ˈrɒk/ (say igneeuhs rok) noun rock formed from magma which has cooled and solidified either at the earth s surface (volcanic rock) or deep within the earth s crust (plutonic rock) …  

  • igneous rock — noun one of the major groups of rock that makes up the crust of the Earth; formed by the cooling of molten rock, either below the surface (intrusive) or on the surface (extrusive) …   Wiktionary

  • igneous rock —   …   Bryson’s dictionary for writers and editors

  • effusive igneous rock — intruzinė uoliena statusas T sritis chemija apibrėžtis Magminė uoliena, susidariusi giliai Žemės plutoje kristalizuojantis magmai. atitikmenys: angl. effusive igneous rock; intrusive igneous rock rus. интрузивная порода …   Chemijos terminų aiškinamasis žodynas

  • intrusive igneous rock — intruzinė uoliena statusas T sritis chemija apibrėžtis Magminė uoliena, susidariusi giliai Žemės plutoje kristalizuojantis magmai. atitikmenys: angl. effusive igneous rock; intrusive igneous rock rus. интрузивная порода …   Chemijos terminų aiškinamasis žodynas

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”