Mesa Boogie Mark Series

The Mesa Boogie Mark Series is a series of guitar amplifier made by Mesa Engineering (more commonly known as "Mesa/Boogie"). Originally just referred to as "Boogies," the product line took on the moniker "Mark Series" as newer revisions were put into production. The Mark Series amplifier was Mesa's flagship product until the introduction of the Rectifier series, and the amplifiers are very collectable.

Mark I

The very first Mark I was made in 1969, when Smith, as a joke, modified Barry Melton's Fender Princeton amplifier. He removed the standard 10 inch speaker and modified the chassis to fit the larger transformers that were needed by the 4-10 tweed Fender Bassman, the circuit that he had added into the 12 watt Princeton. Finally, mounting a 12 inch JBL D-120, a popular speaker of the time, Smith had created what would be the first Boogie.

Randall Smith took the "hot-rodded" Princeton into the front store. Coincidentally, Carlos Santana was present and played through the amp. Impressed, Santana told Smith, "Man, that little amp really boogies!", thus providing the current name for the amplifier and the company.^[1]

The first Boogies are referred to as Mark I's, though they were not given this name until the Mark II was released. They were 60 or 100 watt combo amps with a 12-inch speaker, primarily Altec-Lansing 417-8H Series II. The Mark I had two channels: The "Input 2" channel, voiced like the Fender Bassman, and the high gain "Input 1" channel, which produced the overdriven "Boogie lead" sound used most notably by Carlos Santana on Abraxas, and by The Rolling Stones' Keith Richards and Ron Wood, who used the amps live and in the studio from 1977 until 1993.

This amp in its original form is very collectable. Reverb was optional, and not present on many early Boogies. Later, Mark I models were available with reverb and/or graphic EQ.

Early models have "slave out" and "reverb" labeled on the back with Dymo stick; they do not have any "pull lead" capabilities on the volume controls. Later models had "Pull Bright" and "Pull Boost" on the volume controls. The front panel controls were Volume 1, Volume 2, Treble, Middle, Bass, and Master. These early models are fairly inconsistent, since many of them were "custom" models, made-to-order for various buyers.

Mesa/Boogie has stated the original and the reissue have a "looser" lead sound because the first two preamp stages occurs before the tone controls. In the later Mark II and III models, there is only one gain stage before the tone controls. This signal chain is an issue of some dispute among Boogie owners.^{[citation needed]}

S.O.B. (Son of Boogie)

The S.O.B. was introduced in the Mark II era. This was Mesa/Boogie's first attempt at having a reissue of the Mark I. It had 2 inputs and its controls were Volume 1, Volume 2, Master, High, Middle, Low, Limit or Presence (depending on the version).

Mark II

Mark IIA

The Mark II introduced channel footswitching, and wasn't referred to as the "Mark IIA" until the Mark IIB was issued. It was also available as a head, which could be hooked up to a number of different speaker combinations, although a 1x12 cabinet was the most common. The preamp gain on the Mark IIs occurs after the tone controls and so, according to Mesa/Boogie, the IIA has a "tighter, more focused sound" than the Mark I.^{[citation needed]} The Mark IIA's control panel was extended from the Mark I's to include a separate master volume control for the lead mode, and various push/pull switches including Pull Bright, Pull Treble Shift, Pull Gain Boost, a separate Pull Bright for the lead mode, and of course, Pull Lead. The 1/4" jack previously marked "1" was changed to just "Input," and "2" was changed to "Foot Switch." The Mark IIA was a great improvement over the Mark I, however it had a few major flaws that it received criticism for among collectors. The new footswitching system relied on a relay, which made an audible popping noise when switching modes. The reverb circuit was also noise-ridden on some models. The IIA and IIB, and some late-model Mark I amps, used a JFET-based device called "fetron" in place of the input stage 12AX7 (V1), and included a switch for configuring the amp for either fetron or 12AX7 operation. The reason for using a fetron was to address some of the problems associated with microphonic 12AX7 tubes in a high-gain situation; its use was later discontinued as newer production tubes were able to withstand the extreme conditions within the amplifier.

Mark IIB

The Mark IIB is credited as the first guitar amplifier with a tube-buffered effects loop. However, the loop was placed between two critical gain stages, and tended to overdrive some instrument level effects, and also caused volume pedals to act as remote gain controls for the lead mode. Mesa later implemented a mod that caused the effects loop to become more transparent, and smoothed out the lead channel, similar to the IIC+'s lead channel. More importantly, it marked the introduction of Mesa/Boogie's "Simul-Class" system, where two of the power tubes (always 6L6s) run in class AB pentode while the other two tubes (either 6L6s or EL34s) run in class A triode. In a simul-class amp, running all four tubes generates approximately 75 watts RMS of power; running only the class A tubes produces about 15 watts. Also available were non-simul-class Mark IIBs in both a 60 watt version and a 100 watt version that allowed shifting down to 60 watts by turning off a pair of power tubes.

The Mark IIB's front control panel is identical to that of the IIA. The two input jacks on the front panel are marked "Input" and "Foot Switch." The front panels read Volume, Treble, Bass, Middle, Master, Lead Drive and Master. It has "Pull Bright" on the Volume, "Pull Shift" on the Treble, and "Pull Bright" on the Master. The Rear control panel was altered to accommodate the FX Send and Return jacks.

Mark IIC & IIC+

The Mark IIC finally remedied the two major problems of the IIA and the IIB, which were the noisy reverb circuit, and a footswitching system that produced a popping noise when activated. The Mark IIC featured a quieter footswitching system based on optocouplers to reroute the signal, and a new mod to the reverb circuit. The reverb modification involved resistor swaps and a change in ground lead placement. That mod[ification] is still on the books of 'official' mods, which they send to their authorized techs; it runs about $50."^{[citation needed]} Mesa/Boogie no longer does this modification at its own factory. The Mark IIC also featured a new Pull Bass shift on the front panel, which slightly extended the low frequencies in the preamp.

The Mark IIC+ was the last of the Mark II series and featured a more sensitive lead channel, because it features a dual cascading drive stage, whereas the IIA and IIB had a single stage drive circuit. The IIC+ also had an improved effects loop. Unlike earlier Mark II models, pedals configured for instrument-level input signal could be used without the amp's signal overloading their inputs. However, the volume pedal option on the Mark IIB cannot be implemented on Mark IIC+s.

Some owners/dealers/sellers say the "+" refers to an amp having an EQ, but they are mistaken. The mistake may have originated in the mid 1980s, when Mesa/Boogie issued their Studio .22 model and then changed the name to Studio .22+, which featured improved wiring, etc. All the Mark II models could be made with EQ as an option, but not all of them did. A Mark IIC+ could, for example, refer to a 100 watt amp without EQ or reverb.

One can tell if a particular amp is a "+" by looking for a hand-written black "+" mark directly above where the power cord attaches to the back of the amp. Many dealers increase the price on a Mark IIC+ but often don't know anything about what the "+" means--they often don't even know where to find the "+" mark. Indeed, the mark itself can be forged. An owner can call Mesa/Boogie and ask them to check his or her serial number against their records. Mesa/Boogie only made about 1,400 Mark II amps before going to the Mark IIC+. Another surefire way of distinguishing a IIC from a IIC+ is the front panel. A IIC has the traditional "Gain Boost" pull switch integrated into the master volume, while a IIC+ replaced the switch with a Pull Deep bass booster. Some Coliseum series IIC+'s retained the surplus "Gain Boost" faceplates, though. IIC+'s upgraded from earlier IIC's also retain their original Gain Boost faceplates.

The Mark IIC+ Is currently the most coveted vintage Boogie, selling for twice its original price on average, because of its much praised "Liquid Lead" mode, and also, its warm, clean rhythm mode.

Mark III

The Mark III was launched by Mesa/Boogie in 1985. It introduced a third channel, a "crunch" rhythm sound right in between the rhythm and lead channels. This amp has a dual footswitch system: one footswitch alternates between the current rhythm mode and the lead mode, and the other selects either the clean rhythm mode or the crunch rhythm mode. The two rhythm modes share all of their controls, while the lead mode only shares the rhythm modes' tone stack, featuring independent gain and master volume controls. The physical switch for the crunch rhythm mode was implemented as a push/pull switch above the Middle frequency control.

The Mark III went through multiple revisions, similar to the Mark II. Each revision had a slightly different voicing, but identical functionality. The amplifier had an aggressive voicing, and extreme brightness that is well suited for heavier music.

Black Stripe

These are distinguished by either the absence of a marking, a black dot, or a black marker stripe above the power cord entry. Early Black Stripes retained the same power transformer as the IIC+, which is easily distinguished by its larger physical size than the later-introduced Mark III transformer.

Purple Stripe

The second revision was the "Purple Stripe" Mark III, which featured a purple marker stripe above the power cord. This amplifier was voiced with a more mellow lead and crunch modes, with slightly reduced gain.

Red Stripe

The third revision was the "Red Stripe" Mark III which featured a red marker stripe above the power cord. The amplifier had increased gain over the purple stripe, and lead mode circuitry almost identical to the IIC+.

Blue Stripe

The fourth revision was the "Blue Stripe" Mark III which featured a blue marker stripe above the power cord. The amplifier was voiced so bright, it is considered to be the most aggressive Mark Series Boogie ever introduced. The power amp was also altered to mirror that of the IIC+.

Green Stripe

The final revision was the "Green Stripe" Mark III, which was only available in a Simul-Class format. It was identical to the Blue Stripe, except for the wiring of the Class A power amp tubes, which were switched to Pentode operation, for a 10W RMS increase over previous Simul-Class amplifiers.

Mesa ultimately ended the Mark III's production in the company's largest marketing failure, since it overlapped with production of its successor, the Mark IV, which was introduced in 1990. Mark III's were still in steady production around 1994, and finally ceased as late as 1997, 11 years after its launch.

Mark IV

Mesa Boogie Mark IV

The Mark IV was launched by Mesa/Boogie in 1990. It was the state-of-the-art Mesa/Boogie three-channel combo amp, with independent controls for all three channels, except bass and mid, which are the same for both Rhythm 1 (clean) and Rhythm 2 (crunch). There were two versions of this amp. Start of production until about September 1993 Mark IV's are referred to as version A; amplifiers made from late 1993 until the end of production in 2008 are known as version B. Early B's have an attached power cord, like the A version. Some differences: version A has no footswitch for reverb or stereo effects loop, and the lead channel is much like the Mark IIC+'s. Version B has switchable reverb, a single switchable stereo effects loop, and an output to drive another power amp. Its voicings are altered slightly. Both versions are highly regarded; production of the Mark IV ceased in 2008.

Mark V

The Mark V was introduced as the pinnacle of Mark Series innovations in early 2009. Much like its close cousin, the Triaxis Preamp, it features many voicings based on previous Mark Series amplifiers. It has three discrete channels, much like the 3 channel Dual Rectifiers, each with their own three band tone stack, gain, master, and presence controls. Each channel also has three modes, which control several of the amplifier's 49 relays to mirror the circuit it is modeling. Channel 1, or the clean channel features a Clean mode, based on Rhythm 1 of the Mark IV, Fat mode, which is taken from the Lone Star Classic, and Tweed mode, which boosts the gain into medium breakup, much like the amplifiers of its namesake. Channel 2 features Edge, which pays homage to various British circuits, particularly the Vox AC30, and Marshall JTM, Crunch, which is a lower-gain, looser version of the IIC+'s lead mode, and Mark 1 which is an exact replication of the original amplifier's Input 1 circuitry. Channel 3 includes the IIC+ mode, which is a faithful recreation of the elusive "Liquid Lead" tone, the IV mode, which is a Mark IV with the presence shift pulled out, and Extreme, which is a Mark IV with the presence shift pushed in.

The Mark V introduces for the first time, a channel-assignable graphic EQ. Older Boogies were equipped with graphic equalizers, but did not allow the flexibility that the Mark V's does. Each channel has a toggle switch able to select between active, off, or footswitched. Similar to the Express, and F-series amplifiers, the graphic EQ also features channel-assignable contour knobs.

The Mark V, similar to its predecessor, comes standard in a Simul-class format, but with a twist. Early Simul-class power amps were configured for SC-75 watt operation, or A-15 watt operation, or an increase of 10 watts when in pentode mode. The Mark V is biased warmer to produce an output of SC-90 watts, A-45 watts, and Single-Ended 10 watts, similar to the Lone Star. Channel specific multi-watt toggles dictate the power amplifier's operation class.

Additional features include Recto-Tracking, with the included 5U4G dual diode, three discreet reverb level knobs for each channel, a Pentode-Triode switch for Simul-Class operation, a variac Power option (identical to the Rectifier's Bold/Spongy switch), output and solo controls, and a new 8-button footswitch. Many complaints have arisen regarding the exclusion of an in-built MIDI interface, which is also absent on many of Mesa's high-end products, with the exception of the Triaxis Preamp.

Since it's release, the Mark V has become a highly successful high end amplifier.

Notable guitarists that use or have used Mark V amplifiers live or in the recording studio include John Petrucci, Mark Morton, Steve Lukather, Myles Kennedy, and Tony Rombola.

References

1. ^ Hunter, Dave. Guitar: A complete guide for the player. ISBN 1-57145-561-2