Balloon loop

Balloon loop

A Balloon loop is a track arrangement that allows a train to reverse direction, and return to where it came from, without having to shunt or even to stop. Balloon loops can be useful for passenger trains, and "unit" freight trains, such as coal trains.

Balloon loops do not include track layouts where combinations of junctions allow a train reversal, where this reversal is not regularly used.


Balloon loops were first introduced on metro and tram lines. They did not appear on freight railways in large numbers until the 1960s when the modernising British Rail introduced so-called "merry-go-round" (MGR) coal trains that operated from mines to power stations and back again without shunting.


Balloon loops are essential for operating the single-ended trams found in some cities. Balloon loops were also used by the steam trams found in Sydney, though the loops were mostly removed when double-ended electric trams came into use.



On a balloon loop:The station is located on the balloon loop. The platform may be curved or straight.
*City Hall and South Ferry subway stations in New York City:
**City Hall station on the IRT Lexington Avenue Line is now closed, although the loop track continues to be used to turn trains. These trains discharge and take on passengers at Brooklyn Bridge, one station to the north (see next section).
**South Ferry is a two-track loop station, with a sharply curved side platform for each track. While both tracks continue to be used to turn trains, only the outer platform remains in service as a passenger station. Due to problems with train length and platform clearance, this station will soon be replaced by a standard stub terminus with two tracks and an island platform, although the original trackage will remain in use for turning trains when necessary. []
*Juniper Street Station in Philadelphia, the eastern terminus for the SEPTA Subway-Surface Lines
*Bowdoin Station on the MBTA Blue Line in Boston has a wedge-shaped island platform inside a balloon loop. The station will be closed when 6-car trains begin operating, as those will be too long for the existing platform and there is no room to extend it.
*World Trade Center station on the PATH subway system linking New York and New Jersey.
*Dungeness (Romney, Hythe and Dymchurch Railway) in Kent, England
*The Eurotunnel Shuttle uses balloon loops. However each of the two tracks crosses over at the French end so it is a Möbius loop. This evens the wear on the wheels of the shuttle engines and vehicles, as each set (left or right) spends only half the time as the outer edge of the line.
*Newcastle upon Tyne has a station that trains from London can arrive at in either direction and return to London using the High Level Bridge and King Edward VII Bridge, but this loop-like feature is seldom used.
*Yuen Long of HK-MTR lines|Light Rail
*Olympic Park, Sydney, Australia Platforms 1 and 4 are for boarding; platforms 2 and 3 are for alighting.
*In some cases, multiple stations lie on a balloon loop.
**Terminals 1–3 and Terminal 4 stations at Heathrow Airport on the London Underground
**The LACMTA Blue Line has four stations on its loop through downtown Long Beach (California).
*Peasholm, on the North Bay Railway in Scarborough, North Yorkshire has a reverse balloon loop, with the "neck" of the balloon facing the buffer stop. The loop is used to allow the locomotive to run round the train and reverse at the same time.

With balloon loop:The balloon loop is past the station.

*Bad Herrenalb, Albtalbahn, Germany: Train passes loop before arrival
*Bowling Green on New York City's IRT Lexington Avenue subway line currently serves as the southern terminus for 5 service at all times except rush hours, with the South Ferry inner loop (see previous section) used to physically turn trains.
*Brooklyn Bridge–City Hall, also on New York City's IRT Lexington Avenue Line, currently serves as the southern terminus for Lexington Avenue local service (the 6 train), with the City Hall loop (see previous section) used to physically turn trains.
*Dungeness railway station, Romney, Hythe & Dymchurch Railway, Kent, England. Single track, single platform for both boarding and alighting.
*Howard Station on the CTA Red Line in Chicago.
*69th Street Terminal, the western terminus of the SEPTA Market-Frankford Line in Philadelphia. Westbound trains discharge passengers at the 69th Street station platform and go around the loop to one of two eastbound platforms at 69th Street to pick up passengers for their eastbound journey.
*Kennington tube station, on the London Underground Northern Line, trains from the Charing Cross branch can terminate at Kennington and then run around a loop to return north. Due to the layout, trains from the Bank branch may not access this loop.
*Schwabstraße Stuttgart S-Bahn, Loop is south of the station and completely underground

Paris Métro

* Non-passenger loops: Porte Dauphine (line 2), Porte de Lilas (line 3bis), Porte de Clignancourt and Porte d'Orléans (line 4)
* Passenger loops: Nation (line 2), Charles de Gaulle-Etoile and Nation (line 6), Pré-Saint-Gervais (line 7bis)
* The western end of line 10 deserves a special mention, as it is long loop: trains arriving at Mirabeau from Gare d'Austerlitz enter a loop with a few stations on it: Eglise d'Auteuil, Auteuil, Porte d'Auteuil (official terminus), Michel-Ange Molitor, Chardon Lagache and Mirabeau again, to continue eastwards
* There also are a few loops used for stabling trains, for example west of Invalides and north of Porte de la Villette.

Tram Systems

Balloon loops are used extensively on tramway systems that use single directional trams. Usually located at terminal stations, such a loop is actually a single one-way track round a block. Single directional trams have a cab at only one end and doors on one side, making them cheaper and having more space for passengers. On tram systems with bidirectional trams, balloon loops are not required. The Milan interurban tramway network, although running bidirectional trams, sported balloon loops for termini within the city limits, so that those termini could be used as backup termini by the single directional trams used on urban service. In Milan, tramway depots are built as balloon loops.


New South Wales, Australia:
* Newnes Junction coal loader
* Mount Thorley - coal
* Camberwell - coal
* Ulan - coal
* Wilpinyong - coal
* Penny Road, near Moree - wheat
* Fassifern - coal - has triangle as well, so trains can go north or south.
* Vales Point - coal unloader
* Port Waratah - coal unloader
* Newdell Junction - coal - has two balloon loops for different coal mines
* Bargo - coal - due to change in operational requirements, the balloon loop now points the wrong way, and requires trains to be top and tailed.
* Gunnedah - coal

New Zealand:
* Dargaville Branch - balloon loop providing access to Kirikopuni, 2 km north of the main line. This was eliminated by a bypass in 1943.
* Woodville - balloon loop linking the Wairarapa Line and the Palmerston North - Gisborne Line so that trains running between the Wairarapa and Hawke's Bay do not have to reverse. Unlike a triangle, the balloon loop enables these trains to serve Woodville station.


Both the French and the British terminals of the Eurotunnel Shuttle service through the Channel Tunnel consist of balloon loops.

Occasionally, balloon loops are used for reversing trains on lines with heavy grades and tight curves to equalise wear on both sides of locomotives and rollingstock. Such a balloon loop was constructed at Beech Forest on the 2ft 6in (762mm) VR line from Colac to Crowes.


The advantages of a balloon loop include:
* smooth operation.
* trains can arrive in any free platform, while another train is leaving any platform.

Compared to stations with stub platforms, balloon loops allow:
* fewer tracks and platforms would be required.
* arrivals into some platforms do not block departures from other platforms.
* time is not lost while drivers change ends and reset the train for the other direction.
* if the driver changed ends and discovers a hidden fault, then delays to trains are less likely.


The major disadvantage of a balloon loop is that it needs a lot of space to build, and even so, the curves can be very sharp. The very sharp 180 m radius curves on the Olympic Park balloon loop cause noise, wear and tear on both the wheels and rails. Any platforms should be located on straight track, since if they are located on curved track, the gap between platform and carriage door can be a hazard.

Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Loop — A loop is generally something that closes back on itself such as a circle. The closing can appear in time or in space.cience and technology*Loop (algebra), a quasigroup with an identity element *Loop (graph theory), an edge that begins and ends… …   Wikipedia

  • Loop (rail) — In rail terminology, a loop can mean the following:*Passing loop/crossing loop (Commonwealth) or passing siding (US), a place for a train to wait while other trains pass on an adjacent main line. *Loop line (rail) or simply loop (UK), a railway… …   Wikipedia

  • balloon flight — ▪ aviation Introduction  passage through the air of a balloon that contains a buoyant gas, such as helium or heated air, for which reason it is also known as lighter than air free flight. Unmanned balloons have been used to carry meteorological… …   Universalium

  • Passing loop — Trains in a passing loop A passing loop (also called a passing siding, crossing loop, crossing place or, colloquially, a hole) is a place on a single line railway or tramway, often located at a station, where trains or trams in opposing… …   Wikipedia

  • Hot air balloon — This article is about hot air balloons themselves. For the associated activity, see hot air ballooning. For the rock opera, see Hot Air Balloon (rock opera). For the song, see Hot Air Balloon (song). Hot air balloon in flight …   Wikipedia

  • City Loop — railway line, Melbourne Line details Commenced 1971 Completed 1981 Stations 5 …   Wikipedia

  • Railway station layout — A railway station is a place where trains make scheduled stops. Stations usually have one or more platforms constructed alongside a line of railway. However, railway stations come in many different configurations influenced by such factors as the …   Wikipedia

  • Christchurch tramway routes — have developed from lines that were first established by a troika of private tramway companies in the latter part of the 19th century, through to a significantly expanded system under the municipal Christchurch Tramway Board, to the City Council… …   Wikipedia

  • Trams in Sydney — This is a historical article about the now closed tramways of Sydney. For the current light rail line, see Metro Light Rail. Sydney, the largest city in Australia, once had the largest tram system in Australia, the second largest in the… …   Wikipedia

  • Classification yard — North Yard in Denver, Colorado, a typical U.S. classification yard in 2009 …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.