Infrared

Infrared
An image of two people in mid-infrared ("thermal") light (false-color)
Hidden van Gogh painting under his painting Grasgrond (1887; today in Kröller-Müller Museum). Made visible with a synchrotron X-ray beam.

Infrared (IR) light is electromagnetic radiation with a wavelength longer than that of visible light, measured from the nominal edge of visible red light at 0.74 micrometres ( µm), and extending conventionally to 300 µm. These wavelengths correspond to a frequency range of approximately 1 to 400 THz,[1] and include most of the thermal radiation emitted by objects near room temperature. Microscopically, IR light is typically emitted or absorbed by molecules when they change their rotational-vibrational movements.

Sunlight at zenith provides an irradiance of just over 1 kilowatt per square meter at sea level. Of this energy, 527 watts is infrared radiation, 445 watts is visible light, and 32 watts is ultraviolet radiation.[2]

Contents

Overview

Beta Pictoris as seen in infrared.

Infrared imaging is used extensively for military and civilian purposes. Military applications include target acquisition, surveillance, night vision, homing and tracking. Non-military uses include thermal efficiency analysis, environmental monitoring, industrial facility inspections, remote temperature sensing, short-ranged wireless communication, spectroscopy, and weather forecasting. Infrared astronomy uses sensor-equipped telescopes to penetrate dusty regions of space, such as molecular clouds; detect objects such as planets, and to view highly red-shifted objects from the early days of the universe.[3]

Humans at normal body temperature radiate chiefly at wavelengths around 12 μm (micrometres), as shown by Wien's displacement law.

At the atomic level, infrared energy elicits vibrational modes in a molecule through a change in the dipole moment, making it a useful frequency range for study of these energy states for molecules of the proper symmetry. Infrared spectroscopy examines absorption and transmission of photons in the infrared energy range, based on their frequency and intensity.[4]

Different regions in the infrared

Objects generally emit infrared radiation across a spectrum of wavelengths, but sometimes only a limited region of the spectrum is of interest because sensors usually collect radiation only within a specific bandwidth. Therefore, the infrared band is often subdivided into smaller sections.

Commonly used sub-division scheme

A commonly used sub-division scheme is:[5]

  • Near-infrared (NIR, IR-A DIN): 0.75-1.4 µm in wavelength, defined by the water absorption, and commonly used in fiber optic telecommunication because of low attenuation losses in the SiO2 glass (silica) medium. Image intensifiers are sensitive to this area of the spectrum. Examples include night vision devices such as night vision goggles.
  • Short-wavelength infrared (SWIR, IR-B DIN): 1.4-3 µm, water absorption increases significantly at 1,450 nm. The 1,530 to 1,560 nm range is the dominant spectral region for long-distance telecommunications.
  • Mid-wavelength infrared (MWIR, IR-C DIN) also called intermediate infrared (IIR): 3-8 µm. In guided missile technology the 3-5 µm portion of this band is the atmospheric window in which the homing heads of passive IR 'heat seeking' missiles are designed to work, homing on to the Infrared signature of the target aircraft, typically the jet engine exhaust plume.
  • Long-wavelength infrared (LWIR, IR-C DIN): 8–15 µm. This is the "thermal imaging" region, in which sensors can obtain a completely passive picture of the outside world based on thermal emissions only and requiring no external light or thermal source such as the sun, moon or infrared illuminator. Forward-looking infrared (FLIR) systems use this area of the spectrum. Sometimes also called the "far infrared."
  • Far infrared (FIR): 15 - 1,000 µm (see also far-infrared laser).

NIR and SWIR is sometimes called "reflected infrared" while MWIR and LWIR is sometimes referred to as "thermal infrared." Due to the nature of the blackbody radiation curves, typical 'hot' objects, such as exhaust pipes, often appear brighter in the MW compared to the same object viewed in the LW.

CIE division scheme

The International Commission on Illumination (CIE) recommended the division of infrared radiation into the following three bands:[6]

  • IR-A: 700 nm–1400 nm (0.7 µm – 1.4 µm, 215 THz - 430 THz)
  • IR-B: 1400 nm–3000 nm (1.4 µm – 3 µm, 100 THz - 215 THz)
  • IR-C: 3000 nm–1 mm (3 µm – 1000 µm, 300 GHz - 100 THz)

ISO 20473 scheme

ISO 20473 specifies the following scheme:[7]

Designation Abbreviation Wavelength
Near Infrared NIR 0.78 - 3  µm
Mid Infrared MIR 3 - 50  µm
Far Infrared FIR 50 - 1000  µm

Astronomy division scheme

Astronomers typically divide the infrared spectrum as follows:[8]

Designation Abbreviation Wavelength
Near Infrared NIR (0.7-1) to 5 µm
Mid Infrared MIR 5 to (25-40) µm
Far Infrared FIR (25-40) to (200-350) µm.

These divisions are not precise and can vary depending on the publication. The three regions are used for observation of different temperature ranges, and hence different environments in space.

Sensor response division scheme

Plot of atmospheric transmittance in part of the infrared region.

A third scheme divides up the band based on the response of various detectors:[9]

  • Near infrared: from 0.7 to 1.0  µm (from the approximate end of the response of the human eye to that of silicon).
  • Short-wave infrared: 1.0 to 3  µm (from the cut off of silicon to that of the MWIR atmospheric window. InGaAs covers to about 1.8  µm; the less sensitive lead salts cover this region.
  • Mid-wave infrared: 3 to 5  µm (defined by the atmospheric window and covered by Indium antimonide [InSb] and HgCdTe and partially by lead selenide [PbSe]).
  • Long-wave infrared: 8 to 12, or 7 to 14  µm: the atmospheric window (Covered by HgCdTe and microbolometers).
  • Very-long wave infrared (VLWIR): 12 to about 30  µm, covered by doped silicon.

These divisions are justified by the different human response to this radiation: near infrared is the region closest in wavelength to the radiation detectable by the human eye, mid and far infrared are progressively further from the visible spectrum. Other definitions follow different physical mechanisms (emission peaks, vs. bands, water absorption) and the newest follow technical reasons (The common silicon detectors are sensitive to about 1,050 nm, while InGaAs' sensitivity starts around 950 nm and ends between 1,700 and 2,600 nm, depending on the specific configuration). Unfortunately, international standards for these specifications are not currently available.

The boundary between visible and infrared light is not precisely defined. The human eye is markedly less sensitive to light above 700 nm wavelength, so longer wavelengths make insignificant contributions to scenes illuminated by common light sources. But particularly intense light (e.g., from IR lasers, or from bright daylight with the visible light removed by colored gels) can be detected up to approximately 780 nm, and will be perceived as red light, although sources of up to 1050 nm can be seen as a dull red glow in intense sources. [10] The onset of infrared is defined (according to different standards) at various values typically between 700 nm and 800 nm.

Telecommunication bands in the infrared

In optical communications, the part of the infrared spectrum that is used is divided into seven bands based on availability of light sources transmitting/absorbing materials (fibers) and detectors:[11]

Band Descriptor Wavelength range
O band Original 1260–1360 nm
E band Extended 1360–1460 nm
S band Short wavelength 1460–1530 nm
C band Conventional 1530–1565 nm
L band Long wavelength 1565–1625 nm
U band Ultralong wavelength 1625–1675 nm

The C-band is the dominant band for long-distance telecommunication networks. The S and L bands are based on less well established technology, and are not as widely deployed.

Heat

Infrared radiation is popularly known as "heat radiation", but light and electromagnetic waves of any frequency will heat surfaces that absorb them. Infrared light from the Sun only accounts for 49%[12] of the heating of the Earth, with the rest being caused by visible light that is absorbed then re-radiated at longer wavelengths. Visible light or ultraviolet-emitting lasers can char paper and incandescently hot objects emit visible radiation. Objects at room temperature will emit radiation mostly concentrated in the 8 to 25 µm band, but this is not distinct from the emission of visible light by incandescent objects and ultraviolet by even hotter objects (see black body and Wien's displacement law).[13]

Heat is energy in transient form that flows due to temperature difference. Unlike heat transmitted by thermal conduction or thermal convection, radiation can propagate through a vacuum.

The concept of emissivity is important in understanding the infrared emissions of objects. This is a property of a surface which describes how its thermal emissions deviate from the ideal of a black body. To further explain, two objects at the same physical temperature will not "appear" the same temperature in an infrared image if they have differing emissivities.

Applications

Night vision

Active-infrared night vision : the camera illuminates the scene at infrared wavelengths invisible to the human eye. Despite a dark back-lit scene, active-infrared night vision delivers identifying details, as seen on the display monitor.

Infrared is used in night vision equipment when there is insufficient visible light to see.[14] Night vision devices operate through a process involving the conversion of ambient light photons into electrons which are then amplified by a chemical and electrical process and then converted back into visible light.[14] Infrared light sources can be used to augment the available ambient light for conversion by night vision devices, increasing in-the-dark visibility without actually using a visible light source.[14]

The use of infrared light and night vision devices should not be confused with thermal imaging which creates images based on differences in surface temperature by detecting infrared radiation (heat) that emanates from objects and their surrounding environment.[15]

Thermography

A thermographic image of a dog

Infrared radiation can be used to remotely determine the temperature of objects (if the emissivity is known). This is termed thermography, or in the case of very hot objects in the NIR or visible it is termed pyrometry. Thermography (thermal imaging) is mainly used in military and industrial applications but the technology is reaching the public market in the form of infrared cameras on cars due to the massively reduced production costs.

Thermographic cameras detect radiation in the infrared range of the electromagnetic spectrum (roughly 900–14,000 nanometers or 0.9–14 μm) and produce images of that radiation. Since infrared radiation is emitted by all objects based on their temperatures, according to the black body radiation law, thermography makes it possible to "see" one's environment with or without visible illumination. The amount of radiation emitted by an object increases with temperature, therefore thermography allows one to see variations in temperature (hence the name).

Hyperspectral imaging

Hyperspectral thermal infrared emission measurement, an outdoor scan in winter conditions, ambient temperature -15°C, image produced with a Specim LWIR hyperspectral imager. Relative radiance spectra from various targets in the image are shown with arrows. The infrared spectra of the different objects such as the watch clasp have clearly distinctive characteristics. The contrast level indicates the temperature of the object.[16]
Infrared light from the LED of an Xbox 360 remote control as seen by a digital camera.

A hyperspectral image, a basis for chemical imaging, is a "picture" containing continuous spectrum through a wide spectral range. Hyperspectral imaging is gaining importance in the applied spectroscopy particularly in the fields of NIR, SWIR, MWIR, and LWIR spectral regions. Typical applications include biological, mineralogical, defence, and industrial measurements.

Thermal Infrared Hyperspectral Camera can be applied similarly to a Thermographic camera, with the fundamental difference that each pixel contains a full LWIR spectrum. Consequently, chemical identification of the object can be performed without a need for an external light source such as the Sun or the Moon. Such cameras are typically applied for geological measurements, outdoor surveillance and UAV applications.[17]

Other imaging

In infrared photography, infrared filters are used to capture the near-infrared spectrum. Digital cameras often use infrared blockers. Cheaper digital cameras and camera phones have less effective filters and can "see" intense near-infrared, appearing as a bright purple-white color. This is especially pronounced when taking pictures of subjects near IR-bright areas (such as near a lamp), where the resulting infrared interference can wash out the image. There is also a technique called 'T-ray' imaging, which is imaging using far-infrared or terahertz radiation. Lack of bright sources makes terahertz photography technically more challenging than most other infrared imaging techniques. Recently T-ray imaging has been of considerable interest due to a number of new developments such as terahertz time-domain spectroscopy.

Tracking

Infrared tracking, also known as infrared homing, refers to a passive missile guidance system which uses the emission from a target of electromagnetic radiation in the infrared part of the spectrum to track it. Missiles which use infrared seeking are often referred to as "heat-seekers", since infrared (IR) is just below the visible spectrum of light in frequency and is radiated strongly by hot bodies. Many objects such as people, vehicle engines, and aircraft generate and retain heat, and as such, are especially visible in the infrared wavelengths of light compared to objects in the background.[18]

Heating

Infrared radiation can be used as a deliberate heating source. For example it is used in infrared saunas to heat the occupants, and also to remove ice from the wings of aircraft (de-icing). FIR is also gaining popularity as a safe heat therapy method of natural health care & physiotherapy. Infrared can be used in cooking and heating food as it predominantly heats the opaque, absorbent objects, rather than the air around them.

Infrared heating is also becoming more popular in industrial manufacturing processes, e.g. curing of coatings, forming of plastics, annealing, plastic welding, print drying. In these applications, infrared heaters replace convection ovens and contact heating. Efficiency is achieved by matching the wavelength of the infrared heater to the absorption characteristics of the material.

Communications

IR data transmission is also employed in short-range communication among computer peripherals and personal digital assistants. These devices usually conform to standards published by IrDA, the Infrared Data Association. Remote controls and IrDA devices use infrared light-emitting diodes (LEDs) to emit infrared radiation which is focused by a plastic lens into a narrow beam. The beam is modulated, i.e. switched on and off, to encode the data. The receiver uses a silicon photodiode to convert the infrared radiation to an electric current. It responds only to the rapidly pulsing signal created by the transmitter, and filters out slowly changing infrared radiation from ambient light. Infrared communications are useful for indoor use in areas of high population density. IR does not penetrate walls and so does not interfere with other devices in adjoining rooms. Infrared is the most common way for remote controls to command appliances. Infrared remote control protocols like RC-5, SIRC, are used to communicate with infrared.

Free space optical communication using infrared lasers can be a relatively inexpensive way to install a communications link in an urban area operating at up to 4 gigabit/s, compared to the cost of burying fiber optic cable.

Infrared lasers are used to provide the light for optical fiber communications systems. Infrared light with a wavelength around 1,330 nm (least dispersion) or 1,550 nm (best transmission) are the best choices for standard silica fibers.

IR data transmission of encoded audio versions of printed signs is being researched as an aid for visually impaired people through the RIAS (Remote Infrared Audible Signage) project.

Spectroscopy

Infrared vibrational spectroscopy (see also near infrared spectroscopy) is a technique which can be used to identify molecules by analysis of their constituent bonds. Each chemical bond in a molecule vibrates at a frequency which is characteristic of that bond. A group of atoms in a molecule (e.g. CH2) may have multiple modes of oscillation caused by the stretching and bending motions of the group as a whole. If an oscillation leads to a change in dipole in the molecule, then it will absorb a photon which has the same frequency. The vibrational frequencies of most molecules correspond to the frequencies of infrared light. Typically, the technique is used to study organic compounds using light radiation from 4000–400 cm−1, the mid-infrared. A spectrum of all the frequencies of absorption in a sample is recorded. This can be used to gain information about the sample composition in terms of chemical groups present and also its purity (for example a wet sample will show a broad O-H absorption around 3200 cm−1).

Meteorology

IR Satellite picture taken 1315 Z on 15th October 2006. A frontal system can be seen in the Gulf of Mexico with embedded Cumulonimbus cloud. Shallower Cumulus and Stratocumulus can be seen off the Eastern Seaboard.

Weather satellites equipped with scanning radiometers produce thermal or infrared images which can then enable a trained analyst to determine cloud heights and types, to calculate land and surface water temperatures, and to locate ocean surface features. The scanning is typically in the range 10.3-12.5 µm (IR4 and IR5 channels).

High, cold ice clouds such as Cirrus or Cumulonimbus show up bright white, lower warmer clouds such as Stratus or Stratocumulus show up as grey with intermediate clouds shaded accordingly. Hot land surfaces will show up as dark grey or black. One disadvantage of infrared imagery is that low cloud such as stratus or fog can be a similar temperature to the surrounding land or sea surface and does not show up. However, using the difference in brightness of the IR4 channel (10.3-11.5 µm) and the near-infrared channel (1.58-1.64 µm), low cloud can be distinguished, producing a fog satellite picture. The main advantage of infrared is that images can be produced at night, allowing a continuous sequence of weather to be studied.

These infrared pictures can depict ocean eddies or vortices and map currents such as the Gulf Stream which are valuable to the shipping industry. Fishermen and farmers are interested in knowing land and water temperatures to protect their crops against frost or increase their catch from the sea. Even El Niño phenomena can be spotted. Using color-digitized techniques, the gray shaded thermal images can be converted to color for easier identification of desired information.

Climatology

In the field of climatology, atmospheric infrared radiation is monitored to detect trends in the energy exchange between the earth and the atmosphere. These trends provide information on long term changes in the Earth's climate. It is one of the primary parameters studied in research into global warming together with solar radiation.

A pyrgeometer is utilized in this field of research to perform continuous outdoor measurements. This is a broadband infrared radiometer with sensitivity for infrared radiation between approximately 4.5 µm and 50 µm.

Astronomy

The Spitzer Space Telescope is a dedicated infrared space observatory currently in orbit around the Sun. NASA image.

Astronomers observe objects in the infrared portion of the electromagnetic spectrum using optical components, including mirrors, lenses and solid state digital detectors. For this reason it is classified as part of optical astronomy. To form an image, the components of an infrared telescope need to be carefully shielded from heat sources, and the detectors are chilled using liquid helium.

The sensitivity of Earth-based infrared telescopes is significantly limited by water vapor in the atmosphere, which absorbs a portion of the infrared radiation arriving from space outside of selected atmospheric windows. This limitation can be partially alleviated by placing the telescope observatory at a high altitude, or by carrying the telescope aloft with a balloon or an aircraft. Space telescopes do not suffer from this handicap, and so outer space is considered the ideal location for infrared astronomy.

The infrared portion of the spectrum has several useful benefits for astronomers. Cold, dark molecular clouds of gas and dust in our galaxy will glow with radiated heat as they are irradiated by imbedded stars. Infrared can also be used to detect protostars before they begin to emit visible light. Stars emit a smaller portion of their energy in the infrared spectrum, so nearby cool objects such as planets can be more readily detected. (In the visible light spectrum, the glare from the star will drown out the reflected light from a planet.)

Infrared light is also useful for observing the cores of active galaxies which are often cloaked in gas and dust. Distant galaxies with a high redshift will have the peak portion of their spectrum shifted toward longer wavelengths, so they are more readily observed in the infrared.[3]

Art history

The Arnolfini Portrait by Jan van Eyck, National Gallery, London

Infrared reflectograms, as called by art historians,[19] are taken of paintings to reveal underlying layers, in particular the underdrawing or outline drawn by the artist as a guide. This often uses carbon black which shows up well in reflectograms, so long as it has not also been used in the ground underlying the whole painting. Art historians are looking to see if the visible layers of paint differ from the under-drawing or layers in between - such alterations are called pentimenti when made by the original artist. This is very useful information in deciding whether a painting is the prime version by the original artist or a copy, and whether it has been altered by over-enthusiastic restoration work. Generally the more pentimenti, the more likely a painting is to be the prime version. It also gives useful insights into working practices.[20]

Among many other changes in the Arnolfini Portrait of 1434 (right), the man's face was originally higher by about the height of his eye; the woman's was higher, and her eyes looked more to the front. Each of his feet was underdrawn in one position, painted in another, and then overpainted in a third. These alterations are seen in infra-red reflectograms.[21]

Similar uses of infrared are made by historians on various types of objects, especially very old written documents such as the Dead Sea Scrolls, the Roman works in the Villa of the Papyri, and the Silk Road texts found in the Dunhuang Caves.[22] Carbon black used in ink can show up extremely well.

Biological systems

Thermographic image of a snake eating a mouse
Thermographic image of a fruit bat.

The pit viper has a pair of infrared sensory pits on its head. There is uncertainty regarding the exact thermal sensitivity of this biological infrared detection system.[23][24]

Other organisms that have thermoreceptive organs are pythons (family Pythonidae), some boas (family Boidae), the Common Vampire Bat (Desmodus rotundus), a variety of jewel beetles (Melanophila acuminata),[25] darkly pigmented butterflies (Pachliopta aristolochiae and Troides rhadamantus plateni), and possibly blood-sucking bugs (Triatoma infestans).[26]

Photobiomodulation

Near infrared light, or photobiomodulation, is used for treatment of chemotherapy induced oral ulceration as well as wound healing. There is some work relating to anti herpes virus treatment.[27] Research projects include work on central nervous system healing effects via cytochrome c oxidase upregulation and other possible mechanisms.[28]

Health hazard

Strong infrared radiation in certain industry high heat settings may constitute a health hazard to the eyes and resulting in damaging or even blinding the user. More so, since the radiation is invisible. Therefore special IR proof protective goggles must be worn in such places.[29]

The Earth as an infrared emitter

Brief diagram showing the greenhouse effect

The Earth's surface and the clouds absorb visible and invisible radiation from the sun and re-emit much of the energy as infrared back to the atmosphere. Certain substances in the atmosphere, chiefly cloud droplets and water vapor, but also carbon dioxide, methane, nitrous oxide, sulfur hexafluoride, and chlorofluorocarbons,[30] absorb this infrared, and re-radiate it in all directions including back to Earth. Thus the greenhouse effect keeps the atmosphere and surface much warmer than if the infrared absorbers were absent from the atmosphere.[31]

History of infrared science

The discovery of infrared radiation is ascribed to William Herschel, the astronomer, in the early 19th century. Herschel published his results in 1800 before the Royal Society of London. Herschel used a prism to refract light from the sun and detected the infrared, beyond the red part of the spectrum, through an increase in the temperature recorded on a thermometer. He was surprised at the result and called them "Calorific Rays". The term 'Infrared' did not appear until late in the 19th century.[32]

Other important dates include:[9]

  • 1737: Émilie du Châtelet predicted what is today known as infrared radiation in Dissertation sur la nature et la propagation du feu.
  • 1835: Macedonio Melloni makes the first thermopile IR detector.
  • 1860: Gustav Kirchhoff formulates the blackbody theorem E = J(T,n).
  • 1873: Willoughby Smith discovers the photoconductivity of selenium.
  • 1879: Stefan-Boltzmann law formulated empirically that the power radiated by a blackbody is proportional to T4.
  • 1880s & 1890s: Lord Rayleigh and Wilhelm Wien both solve part of the blackbody equation, but both solutions are approximations that "blow up" out of their useful ranges. This problem was called the "Ultraviolet catastrophe and Infrared Catastrophe".
  • 1901: Max Planck published the blackbody equation and theorem. He solved the problem by quantizing the allowable energy transitions.
  • 1905: Albert Einstein develops the theory of the photoelectric effect, determining the photon. Also William Coblentz in spectroscopy and radiometry.
  • 1917: Theodore Case develops thallous sulfide detector; British develop the first infra-red search and track (IRST) in World War I and detect aircraft at a range of one mile (1.6 km).
  • 1935: Lead salts - early missile guidance in World War II.
  • 1938: Teau Ta - predicted that the pyroelectric effect could be used to detect infrared radiation.
  • 1945: The Zielgerät 1229 "Vampir" infrared weapon system is introduced, as the first man portable infrared device to be used in a military application.
  • 1952: H. Welker discovers InSb.
  • 1950s: Paul Kruse (at Honeywell) and Texas Instruments form infrared images before 1955.
  • 1950s and 1960s: Nomenclature and radiometric units defined by Fred Nicodemenus, G.J. Zissis and R. Clark, Jones defines D*.
  • 1958: W.D. Lawson (Royal Radar Establishment in Malvern) discovers IR detection properties of HgCdTe.
  • 1958: Falcon & Sidewinder missiles developed using infrared and the first textbook on infrared sensors appears by Paul Kruse, et al.
  • 1961: J. Cooper demonstrated pyroelectric detection.
  • 1962: Kruse and ? Rodat advance HgCdTe; Signal Element and Linear Arrays available.
  • 1965: First IR Handbook; first commercial imagers (Barnes, Agema {now part of FLIR Systems Inc.}; Richard Hudson's landmark text; F4 TRAM FLIR by Hughes; phenomenology pioneered by Fred Simmons and A.T. Stair; U.S. Army's night vision lab formed (now Night Vision and Electronic Sensors Directorate (NVESD), and Rachets develops detection, recognition and identification modeling there.
  • 1970: Willard Boyle & George E. Smith propose CCD at Bell Labs for picture phone.
  • 1972: Common module program started by NVESD.
  • 1978: Infrared imaging astronomy comes of age, observatories planned, IRTF on Mauna Kea opened; 32 by 32 and 64 by 64 arrays are produced in InSb, HgCdTe and other materials.

See also

References

  1. ^ Dr. S. C. Liew. "Electromagnetic Waves". Centre for Remote Imaging, Sensing and Processing. http://www.crisp.nus.edu.sg/~research/tutorial/em.htm. Retrieved 2006-10-27. 
  2. ^ "Reference Solar Spectral Irradiance: Air Mass 1.5". http://rredc.nrel.gov/solar/spectra/am1.5/. Retrieved 2009-11-12. 
  3. ^ a b "IR Astronomy: Overview". NASA Infrared Astronomy and Processing Center. http://www.ipac.caltech.edu/Outreach/Edu/importance.html. Retrieved 2006-10-30. 
  4. ^ Reusch, William (1999). "Infrared Spectroscopy". Michigan State University. http://www.cem.msu.edu/~reusch/VirtualText/Spectrpy/InfraRed/infrared.htm. Retrieved 2006-10-27. 
  5. ^ Byrnes, James (2009). Unexploded Ordnance Detection and Mitigation. Springer. pp. 21–22. ISBN 9781402092527. 
  6. ^ Henderson, Roy. "Wavelength considerations". Instituts für Umform- und Hochleistungs. Archived from the original on 2007-10-28. http://web.archive.org/web/20071028072110/http://info.tuwien.ac.at/iflt/safety/section1/1_1_1.htm. Retrieved 2007-10-18. 
  7. ^ "ISO 20473:2007". ISO. 
  8. ^ IPAC Staff. "Near, Mid and Far-Infrared". NASA ipac. http://www.ipac.caltech.edu/Outreach/Edu/Regions/irregions.html. Retrieved 2007-04-04. 
  9. ^ a b Miller, Principles of Infrared Technology (Van Nostrand Reinhold, 1992), and Miller and Friedman, Photonic Rules of Thumb, 2004. ISBN 9780442012106[page needed]
  10. ^ D.R. Griffin, R Hubbard, G Wald (1947). "The Sensitivity of the Human Eye to Infra-Red Radiation". J. Opt. Soc. Am. 37 (7): 546–553. doi:10.1364/JOSA.37.000546. 
  11. ^ Ramaswami, Rajiv (May 2002). "Optical Fiber Communication: From Transmission to Networking" (PDF). IEEE. http://ieeexplore.ieee.org/iel5/35/21724/01006983.pdf. Retrieved 2006-10-18. 
  12. ^ "Introduction to Solar Energy" (DOC). Passive Solar Heating & Cooling Manual. Rodale Press, Inc.. 1980. http://www.azsolarcenter.com/design/documents/passive.DOC. Retrieved 2007-08-12. 
  13. ^ McCreary, Jeremy (October 30, 2004). "Infrared (IR) basics for digital photographers-capturing the unseen (Sidebar: Black Body Radiation)". Digital Photography For What It's Worth. http://dpfwiw.com/ir.htm. Retrieved 2006-11-07. 
  14. ^ a b c "How Night Vision Works". American Technologies Network Corporation. http://www.atncorp.com/HowNightVisionWorks. Retrieved 2007-08-12. 
  15. ^ Bryant, Lynn (2007-06-11). "How does thermal imaging work? A closer look at what is behind this remarkable technology". http://www.video-surveillance-guide.com/how-does-thermal-imaging-work.htm. Retrieved 2007-08-12. 
  16. ^ Holma, H., (May 2011), Thermische Hyperspektralbildgebung im langwelligen Infrarot, Photonik
  17. ^ Frost&Sullivan, Technical Insights, Aerospace&Defence (Feb 2011): World First Thermal Hyperspectral Camera for Unmanned Aerial Vehicles
  18. ^ Mahulikar, S.P., Sonawane, H.R., & Rao, G.A.: (2007) "Infrared signature studies of aerospace vehicles", Progress in Aerospace Sciences, v. 43(7-8), pp. 218-245.
  19. ^ "IR Reflectography for Non-destructive Analysis of Underdrawings in Art Objects". Sensors Unlimited, Inc.. http://www.sensorsinc.com/artanalysis.html. Retrieved 2009-02-20. 
  20. ^ "The Mass of Saint Gregory: Examining a Painting Using Infrared Reflectography". The Cleveland Museum of Art. http://www.clevelandart.org/exhibcef/ConsExhib/html/grien.html. Retrieved 2009-02-20. 
  21. ^ National Gallery Catalogues: The Fifteenth Century Netherlandish Paintings by Lorne Campbell, 1998, ISBN 185709171[page needed]
  22. ^ "International Dunhuang Project An Introduction to digital infrared photography and its application within IDP -paper pdf 6.4 MB". Idp.bl.uk. http://idp.bl.uk/pages/technical_resources.a4d. Retrieved 2011-11-08. 
  23. ^ B. S. Jones; W. F. Lynn; M. O. Stone (2001). "Thermal Modeling of Snake Infrared Reception: Evidence for Limited Detection Range". Journal of Theoretical Biology 209 (2): 201–211. doi:10.1006/jtbi.2000.2256. PMID 11401462. 
  24. ^ V. Gorbunov; N. Fuchigami; M. Stone; M. Grace; V. V. Tsukruk (2002). "Biological Thermal Detection: Micromechanical and Microthermal Properties of Biological Infrared Receptors". Biomacromolecules 3 (1): 106–115. doi:10.1021/bm015591f. PMID 11866562. 
  25. ^ Evans, W.G. (1966). "Infrared receptors in Melanophila acuminata De Geer". Nature 202 (4928): 211. Bibcode 1964Natur.202..211E. doi:10.1038/202211a0. 
  26. ^ A.L. Campbell, A.L. Naik, L. Sowards, M.O. Stone (2002). "Biological infrared imaging and sensing". Micrometre 33 (2): 211–225. doi:10.1016/S0968-4328(01)00010-5. PMID 11567889. 
  27. ^ Hargate, G (2006). "A randomised double-blind study comparing the effect of 1072-nm light against placebo for the treatment of herpes labialis.". Clinical and experimental dermatology 31 (5): 638–41. doi:10.1111/j.1365-2230.2006.02191.x. PMID 16780494. 
  28. ^ Desmet, KD; Paz, DA; Corry, JJ; Eells, JT; Wong-Riley, MT; Henry, MM; Buchmann, EV; Connelly, MP et al. (2006). "Clinical and experimental applications of NIR-LED photobiomodulation.". Photomedicine and laser surgery 24 (2): 121–8. doi:10.1089/pho.2006.24.121. PMID 16706690. 
  29. ^ "The artist's complete health and ... - Monona Rossol, Graphic Artists Guild (U.S.) - Google Books". Books.google.com. http://books.google.com/books?id=E7-9unTgJrwC&pg=PA33&lpg=PA33&dq=infrared+protective+goggles. Retrieved 2011-11-08. 
  30. ^ "Global Sources of Greenhouse Gases". Emissions of Greenhouse Gases in the United States 2000. Energy Information Administration. 2002-05-02. http://www.eia.doe.gov/oiaf/1605/gg01rpt/emission.html. Retrieved 2007-08-13. 
  31. ^ "Clouds & Radiation". http://earthobservatory.nasa.gov/Library/Clouds/. Retrieved 2007-08-12. 
  32. ^ "Herschel Discovers Infrared Light". Coolcosmos.ipac.caltech.edu. http://coolcosmos.ipac.caltech.edu/cosmic_classroom/classroom_activities/herschel_bio.html. Retrieved 2011-11-08. 

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Infrared — In fra*red , Infra red In fra red , a. [Infra + red.] 1. (Physics) Lying outside the visible spectrum at its red end; said of rays having a longer wavelength (and thus less refrangible) than the extreme red rays, specifically those… …   The Collaborative International Dictionary of English

  • Infrared —   [engl.], infrarot …   Universal-Lexikon

  • infrared — ► NOUN ▪ electromagnetic radiation having a wavelength just greater than that of red light but less than that of microwaves, emitted particularly by heated objects. ► ADJECTIVE ▪ of or relating to such radiation …   English terms dictionary

  • infrared — [in΄frə red′, in′frə red΄] adj. designating or of those invisible rays just beyond the red end of the visible spectrum: their waves are longer than those of the spectrum colors but shorter than radio waves, and have a penetrating heating effect:… …   English World dictionary

  • infrared — adjective Date: 1881 1. situated outside the visible spectrum at its red end used of radiation having a wavelength between about 700 nanometers and 1 millimeter 2. relating to, producing, or employing infrared radiation < infrared therapy > 3.… …   New Collegiate Dictionary

  • infrared — That portion of the electromagnetic spectrum with wavelengths between 730 and 1000 nm. * * * in·fra·red .in frə red adj 1) lying outside the visible spectrum at its red end used of radiation having a wavelength between about 700 nanometers and 1… …   Medical dictionary

  • infrared — [[t]ɪ̱nfrə re̱d[/t]] also infra red 1) ADJ: ADJ n Infrared radiation is similar to light but has a longer wavelength, so we cannot see it without special equipment. 2) ADJ: ADJ n Infrared equipment detects infrared radiation. ...searching with… …   English dictionary

  • infrared — /in freuh red /, n. 1. the part of the invisible spectrum that is contiguous to the red end of the visible spectrum and that comprises electromagnetic radiation of wavelengths from 800 nm to 1 mm. adj. 2. noting or pertaining to the infrared or… …   Universalium

  • infrared — 1. noun electromagnetic radiation of a wavelength longer than visible light, but shorter than microwave radiation, having a wavelength between 700 nm and 1 mm 2. adjective a) Having the wavelen …   Wiktionary

  • infrared — That portion of the electromagnetic spectrum with a wavelength longer than deep red light (wavelength between 7800 and 1,000,000 angstroms and just slightly longer than the longest wavelength of visible light), thus not visible but sensed as heat …   Aviation dictionary

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”