Long-lived fission product

Long-lived fission product

Long-lived fission products are radioactive materials with a long half-life (more than 200,000 years) produced by nuclear fission.


Evolution of radioactivity in nuclear waste

Nuclear fission produces fission products, as well as actinides from nuclear fuel nuclei that capture neutrons but fail to fission, and activation products from neutron activation of reactor or environmental materials.


The high short-term radioactivity of spent nuclear fuel is primarily from fission products with short half-life. The radioactivity in the fission product mixture is mostly short-lived isotopes such as I-131 and 140Ba, after about four months 141Ce, 95Zr/95Nb and 89Sr take the largest share, while after about two or three years the largest share is taken by 144Ce/144Pr, 106Ru/106Rh and 147Pm. Note that in the case of a release of radioactivity from a power reactor or used fuel, only some elements are released. As a result the isotopic signature of the radioactivity is very different from an open air nuclear detonation where all the fission products are dispersed.

Medium-lived fission products

fission products
Q *
155Eu 4.76 .0803 252 βγ
85Kr 10.76 .2180 687 βγ
113mCd 14.1 .0008 316 β
90Sr 28.9 4.505 2826 β
137Cs 30.23 6.337 1176 βγ
121mSn 43.9 .00005 390 βγ
151Sm 90 .5314 77 β

After several years of cooling, most radioactivity is from the fission products caesium-137 and strontium-90, which are each produced in about 6% of fissions, and have half-lives of about 30 years. Other fission products with similar half-lives have much lower fission product yields, lower decay energy, and several (151Sm,155Eu,113mCd) are also quickly destroyed by neutron capture while still in the reactor, so are not responsible for more than a tiny fraction of the radiation production at any time. Therefore, in the period from several years to several hundred years after use, radioactivity of spent fuel can be modeled simply as exponential decay of the 137Cs and 90Sr. These are sometimes known as medium-lived fission products.[1][2]

Krypton-85, the 3rd most active MLFP, is a noble gas which is allowed to escape during current nuclear reprocessing; however, its inertness means that it does not concentrate in the environment, but diffuses to a uniform low concentration in the atmosphere. Spent fuel in the US and some other countries is not likely to be reprocessed until decades after use, and by that time most of the Kr-85 will have decayed.


Actinides Half-life Fission products
244Cm 241Pu f 250Cf 243Cmf 10–30 y 137Cs 90Sr 85Kr
232 f 238Pu f is for
69–90 y 151Sm nc➔
4n 249Cf  f 242Amf 141–351 No fission product
has half-life 102
to 2×105 years
241Am 251Cf  f 431–898
240Pu 229Th 246Cm 243Am 5–7 ky
4n 245Cmf 250Cm 239Pu f 8–24 ky
233U    f 230Th 231Pa 32–160
4n+1 234U 4n+3 211–290 99Tc 126Sn 79Se
248Cm 242Pu 340–373 Long-lived fission products
237Np 4n+2 1–2 My 93Zr 135Cs nc➔
236U 4n+1 247Cmf 6–23 My 107Pd 129I
244Pu 80 My >7% >5% >1% >.1%
232Th 238U 235U    f 0.7–12 Ty fission product yield

After Cs-137 and Sr-90 have decayed to low levels, the bulk of radioactivity from spent fuel come not from fission products but actinides, notably plutonium-239, plutonium-240, americium-241, americium-243, curium-245, and curium-246. These can be recovered by nuclear reprocessing (either before or after most Cs-137 and Sr-90 decay) and fissioned, offering the possibility of greatly reducing waste radioactivity in the time scale of about 103 to 105 years. Pu-239 is usable as fuel in existing thermal reactors, but some minor actinides like Am-241, as well as the non-fissile and less-fertile isotope plutonium-242, are better destroyed in fast reactors, accelerator-driven subcritical reactors, or fusion reactors.

Long-lived fission products

On scales greater than 105 years, fission products, chiefly 99Tc, again represent a significant proportion of the remaining, though lower, radioactivity, along with longer-lived actinides like neptunium-237 and plutonium-242, if those have not been destroyed.

The most abundant long-lived fission products have total decay energy around 100-300 KeV, only part of which appears in the beta particle; the rest is lost to a neutrino that has no effect. In contrast, actinides undergo multiple alpha decays, each with decay energy around 4-5 MeV.

Only seven fission products have long half-lives, and these are much longer than 30 years, in the range of 200,000 to 16 million years. These are known as long-lived fission products (LLFP). Two or three have relatively high yields of about 6%, while the rest appear at much lower yields. (This list of seven excludes isotopes with very slow decay and half-lives longer than the age of the universe, which are effectively stable and already found in nature; as well as a few nuclides like technetium-98 and samarium-146 that are "shadowed" from beta decay and can only occur as direct fission products, not as beta decay products of more neutron-rich initial fission products. The shadowed fission products have yields on the order of one millionth as much as iodine-129.)

The 7 long-lived fission products

fission products
Q *
99Tc 0.211 6.1385 294 β
126Sn 0.230 0.1084 4050 βγ
79Se 0.327 0.0447 151 β
93Zr 1.53 5.4575 91 βγ
135Cs 2.3  6.9110 269 β
107Pd 6.5  1.2499 33 β
129I 15.7  0.8410 194 βγ

The first three have similar half-lives, between 200 thousand and 300 thousand years; the last four have longer half-lives, in the low millions of years.

  1. Technetium-99 produces the largest amount of LLFP radioactivity. It emits beta particles of low to medium energy but no gamma rays, so has little hazard on external exposure, but only if ingested. However, technetium's chemistry allows it to form anions (pertechnate, TcO4-) that are relatively mobile in the environment. Tons of technetium-99 have been released into the ocean.
  2. Tin-126 has a large decay energy (due to a following short-halflife decay) and is the only LLFP that emits energetic gamma radiation, which is an external exposure hazard. However, this isotope is produced in very small quantities in fission by thermal neutrons, so the energy per unit time from 126Sn is only about 5% as much as from 99Tc for U-235 fission, or 20% as much for 65% U-235+35% Pu-239. Fast fission may produce higher yields. Tin is an inert metal with little mobility in the environment, helping limit health risks from its radiation.
  3. Selenium-79 is produced at low yields and has weak radiation. Its decay energy per unit time should be only about 0.2% that of Tc-99.
  4. Zirconium-93 is produced at a relatively high yield of about 6%, but its decay is 7.5 times slower than Tc-99, and its decay energy is only 30% as great; therefore its energy production is initially only 4% as great as Tc-99, though this fraction will increase as the Tc-99 decays. 93Zr does produce gamma radiation, but of a very low energy, and zirconium is relatively inert in the environment.
  5. Caesium-135's predecessor xenon-135 is produced at a high rate of over 6% of fissions, but is an extremely potent absorber of thermal neutrons (neutron poison), so that most of it is transmuted to nonradioactive xenon-136 before it can decay to caesium-135. If 90% of 135Xe is destroyed, then the remaining 135Cs's decay energy per unit time is initially only about 1% as great as that of the 99Tc. In a fast reactor, less of the Xe-135 may be destroyed.
    135Cs is the only alkaline or electropositive LLFP; in contrast, the main medium-lived fission products and the minor actinides other than neptunium are all alkaline and tend to stay together during reprocessing; with many reprocessing techniques such as salt solution or salt volatilization, 135Cs will also stay with this group, although some techniques such as high-temperature volatilization can separate it. Often the alkaline wastes are vitrified to form high level waste, which will include the 135Cs.
    Fission caesium contains not only 135Cs but also stable but neutron-absorbing 133Cs (which wastes neutrons and forms 134Cs which is radioactive with a half-life of 2 years) as well as the common fission product 137Cs which does not absorb neutrons but is highly radioactive, making handling more hazardous and complicated; for all these reasons, transmutation disposal of 135Cs would be more difficult.
  6. Palladium-107 has a very long half-life, a low yield (though the yield for plutonium fission is higher than the yield from uranium-235 fission), and very weak radiation. Its initial contribution to LLFP radiation should be only about one part in 10000 for U-235 fission, or 2000 for 65% U-235+35% Pu-239. Palladium is a noble metal and extremely inert.
  7. Iodine-129 has the longest half-life, 15.7 million years. Initially it has only about 1% as intense radioactivity as Tc-99. However, radioactive iodine is a disproportionate biohazard because the thyroid gland concentrates iodine. I-129 has a half-life nearly a billion times as long as its sister isotope iodine-131 which is a hazard from nuclear explosions, and a smaller decay energy, so is only about a billionth as radioactive per unit mass.

LLFP radioactivity compared

In total, the other six LLFPs, in thermal reactor spent fuel, initially release only a bit more than 10% as much energy per unit time as Tc-99 for U-235 fission, or 25% as much for 65% U-235+35% Pu-239. About 1000 years after fuel use, radioactivity from the medium-lived fission products Cs-137 and Sr-90 drops below the level of radioactivity from Tc-99 or LLFPs in general. (Actinides, if not removed, will be emitting more radioactivity than either at this point.) By about 1 million years, Tc-99 radioactivity will have declined below that of Zr-93, though immobility of the latter means it is probably still a lesser hazard. By about 3 million years, Zr-93 decay energy will have declined below that of I-129.

Nuclear transmutation is under consideration as a disposal method, primarily for Tc-99 and I-129 as these both represent the greatest biohazards and have the greatest neutron capture cross sections, although transmutation is still slow compared to fission of actinides in a reactor. Transmutation has also been considered for Cs-135, but is almost certainly not worthwhile for the other LLFPs.


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • long-lived fission product — ilgaamžis dalijimosi produktas statusas T sritis fizika atitikmenys: angl. long lived fission product vok. langlebiges Spaltprodukt, n rus. долгоживущий продукт деления, m pranc. produit de fission à vie longue, m …   Fizikos terminų žodynas

  • Fission product — Fission products are the atomic fragments left after a large nucleus fissions. Typically, a large nucleus like Uranium fissions by splitting into two smaller nuclei, along with a few neutrons and a large release of energy in the form of heat… …   Wikipedia

  • Nuclear fission product — Nuclear fission products are the atomic fragments left after a large atomic nucleus fissions. Typically, a large nucleus like that of uranium fissions by splitting into two smaller nuclei, along with a few neutrons and a large release of energy… …   Wikipedia

  • Fission products (by element) — On this page, a discussion of each of the main elements in the fission product mixture from the nuclear fission of an actinide such as uranium or plutonium is set out by element. Krypton 83 86 Krypton 85 is formed by the fission process witha… …   Wikipedia

  • produit de fission à vie longue — ilgaamžis dalijimosi produktas statusas T sritis fizika atitikmenys: angl. long lived fission product vok. langlebiges Spaltprodukt, n rus. долгоживущий продукт деления, m pranc. produit de fission à vie longue, m …   Fizikos terminų žodynas

  • nuclear fission — fission (def. 2). [1885 90] * * * Division of a heavy atomic nucleus into two fragments of roughly equal mass, accompanied by the release of a large amount of energy, the binding energy of the subatomic particles. The energy released in the… …   Universalium

  • Natural nuclear fission reactor — Geological situation in Gabon leading to natural nuclear fission reactors 1. Nuclear reactor zones 2. Sandstone 3. Uranium ore layer 4. Granite A natural nuclear fission reactor is a uranium deposit where analysis of isotope ratios has shown that …   Wikipedia

  • Nuclear fission — For the generation of electrical power by fission, see Nuclear power. Splitting the atom redirects here. For the EP, see Splitting the Atom. Nuclear physics Radioactive decay Nuclear fission Nuclear fusio …   Wikipedia

  • Nuclear fusion-fission hybrid — Hybrid nuclear fusion fission (hybrid nuclear power) is a proposed means of generating power by use of a combination of nuclear fusion and fission processes. The concept dates to the 1950s, and was briefly advocated by Hans Bethe during the 1970s …   Wikipedia

  • Nuclear reprocessing — technology was developed to chemically separate and recover fissionable plutonium from irradiated nuclear fuel.[1] Reprocessing serves multiple purposes, whose relative importance has changed over time. Originally reprocessing was used solely to… …   Wikipedia