Metropolitan planning organization


Metropolitan planning organization

A metropolitan planning organization (MPO) is a federally-mandated and federally-funded transportation policy-making organization in the United States that is made up of representatives from local government and governmental transportation authorities. The United States Congress passed the Federal-Aid Highway Act of 1962, which required the formation of an MPO for any urbanized area (UZA) with a population greater than 50,000. Federal funding for transportation projects and programs are channeled through this planning process. Congress created MPOs in order to ensure that existing and future expenditures of governmental funds for transportation projects and programs are based on a continuing, cooperative, and comprehensive (“3-C”) planning process. Statewide and metropolitan transportation planning processes are governed by federal law (23 U.S.C. §§ 134135). Transparency through public access to participation in the planning process and electronic publication of plans now is required by federal law. As of 2005, there are 385 MPOs in the U.S.

Contents

Purpose

In creating the requirements for MPOs and a metropolitan planning process, Congress identified several key reasons MPOs are essential:

  • transportation investment means allocating scarce federal and other transportation funding resources appropriately;
  • planning needs to reflect the region’s shared vision for its future;
  • adequate transportation planning requires a comprehensive examination of the region’s future and investment alternatives; and
  • an MPO is needed to facilitate collaboration of governments, interested parties, and residents in the planning process.

In other words, the federal government wishes to see federal transportation funds spent in a manner that has a basis in metropolitan region-wide plans developed through inter-governmental collaboration, rational analysis, and consensus-based decision-making.

Governance

Typically, an MPO governance structure includes a variety of committees as well as a professional staff. The “policy committee” is the top-level decision-making body for the planning organization. In most MPOs, the policy committee comprises:

  • elected or appointed officials from local governmental jurisdictions such as municipalities or counties;
  • representatives of different transportation modes, such as public transit, freight, bicycle/pedestrian; and
  • state agency officials such as, state Department of Transportation, environmental agency, etc.; and
  • non-voting members such as FHWA, FTA, FAA, FRA, staff advisers from state departments of transportation, Chambers of Commerce, etc.

With only a few unique exceptions nationwide (such as the MPO in Portland, Oregon), MPO policy committee members are not elected directly by citizens. Rather, a policy committee member typically is an elected or appointed official of one of the MPO’s constituent local jurisdictions. The policy committee member thus has legal authority to speak and act on behalf of that jurisdiction in the MPO setting. However, Federal law does not require that MPO policy committee members are representative of the metropolitan areas' populations. Systematic studies have found that MPO policy committees' representations of urban municipalities and disadvantaged minority populations in their areas are less than proportional to population.[1] The policy committee’s responsibilities include debating and making decisions on key MPO actions and issues, including adoption of the metropolitan long-range transportation plans, transportation improvement programs, annual planning work programs, budgets, and other policy documents. The policy committee also may play an active role in key decision points or milestones associated with MPO plans and studies, as well as conducting public hearings and meetings. An appointed advisory committee (CAC) develops the recommendations for consideration by the policy committee and establishes a ranked proposal for work plans.

Most MPOs also establish a technical committee to act as an advisory body to the policy committee for transportation issues that primarily are technical in nature. The technical committee interacts with the MPO’s professional staff on technical matters related to planning, analysis tasks, and projects. Through this work, the technical committee develops recommendations on projects and programs for policy committee consideration. Metropolitan travel forecasting is one of the key roles that the technical committee supports. The technical committee typically comprises staff-level officials of local, state, and federal agencies. In addition, a technical committee may include representatives of interest groups, various transportation modes, and in some cases, local citizens. A 2005 survey of MPOs nationally commissioned in preparation of Special Report 288 of the U.S. Transportation Research Board found that "forecast by negotiation" was a common method of projecting future population and employment growth for use in travel forecasting, suggesting rent-seeking behavior on the part of MPO committees influencing the technical staff.[2]

Usually MPOs retain a core professional staff in order to ensure the ability to carry out the required metropolitan planning process in an effective and expeditious manner. The size and qualifications of this staff may vary by MPO, since no two metropolitan areas are the same nor have the same planning needs. Most MPOs, however, require at least some staff dedicated solely to MPO process oversight and management because of the complexity of the process and need to ensure that requirements are properly addressed.

Core functions

There are five core functions of an MPO:

  1. establish a setting: establish and manage a fair and impartial setting for effective regional decision-making in the metropolitan area (UZA)
  2. evaluate alternatives: evaluate transportation alternatives, scaled to the size and complexity of the region, to the nature of its transportation issues, and to the realistically available options
  3. maintain a long-range transportation plan (LRTP): develop and update a fiscally-constrained long-range transportation plan for the UZA covering a planning horizon of at least twenty years that fosters
    • mobility and access for people and goods,
    • efficient system performance and preservation, and
    • quality of life
  4. develop a transportation improvement program (TIP): develop a fiscally-constrained program based on the long-range transportation plan and designed to serve the UZA’s goals while using spending, regulating, operating, management, and financial tools
  5. involve the public: involve the general public and all the significantly affected sub-groups in the four essential functions listed above.

If the metropolitan area is designated as an air quality non-attainment or maintenance area, then

  1. protect air quality: transportation plans, programs, and projects must conform with the air quality plan, known as the “state implementation plan” (SIP), for the state within which the UZA lies.

Presently, most MPOs have no authority to raise revenues such as to levy taxes on their own, rather, they are designed to allow local officials to decide collaboratively how to spend available federal and other governmental transportation funds in their urbanized areas. The funding for the operations of an MPO comes from a combination of federal transportation funds and required matching funds from state and local governments.

Structure of MPO organizations

MPOs differ greatly in various parts of the country and even within states. Some have large staffs, while others may include only a director and a transportation planner. Sometimes the professional staff of an MPO is provided by a county or a council of governments. In many urban areas, existing organizations such as county governments or councils of government also function as MPOs. The MPO role also may be played by an independent governmental organization or a regional government.[3] In the Portland, Oregon metropolitan area, for example, the Metro is the MPO. In the Minneapolis-St. Paul, Minnesota metropolitan area, the Metropolitan Council is the MPO.

An example of a medium-sized MPO is the Lexington Area MPO in the Lexington, Kentucky region. An example of a small MPO is the Kittery Area MPO in Maine.[4]

Another MPO planning organization has developed in the area of western central Florida. Several MPOs there, with governance over eight counties, have developed a greater regional planning committee, the Chairs Coordinating Committee (CCC)[5], composed of the chairs of seven MPOs and the chairs of their appointed advisory committee (or their representatives) in order to co-ordinate transportation planning for the region, that is compatible with all, as well as addressing the challenges of long range planning for a large and growing region that has overlapping issues among the MPOs or transportation plans that extend throughout the entire area. Often the members of the executive committee of an MPO act interchangeably as the representative to this seven-MPO regional committee. This committee meets less frequently than the participating MPOs.

Evolving role

The enactment of the 1991 Intermodal Surface Transportation Efficiency Act (ISTEA) ushered in a “renaissance” for MPOs. After a decade or more of being consigned to a minimal role in transportation planning, ISTEA directed additional federal funding to MPOs, expanded their authority to select projects, and mandated new metropolitan planning initiatives. For the first time, state transportation officials were required to consult seriously with local representatives on MPO governing boards regarding matters of project prioritization and decision-making. These changes had their roots in the need to address increasingly difficult transportation problems—in particular, the more complicated patterns of traffic congestion that arose with the suburban development boom in the previous decades. Many recognized that the problems could only be addressed effectively through a stronger federal commitment to regional planning.

The legislation that emerged, the Intermodal Surface Transportation Efficiency Act (ISTEA), was signed into federal law by President Bush in December 1991. It focused on improving transportation, not as an end in itself, but as the means to achieve important national goals including economic progress, cleaner air, energy conservation, and social equity. ISTEA promoted a transportation system in which different modes and facilities—highway, transit, pedestrian, bicycle, aviation, and marine—were integrated to allow a "seamless" movement of both goods and people. New funding programs provided greater flexibility in the use of funds, particularly regarding using previously restricted highway funds for transit development, improved "intermodal" connections, and emphasized upgrades to existing facilities over building new capacity—particularly roadway capacity.

To accomplish more serious metropolitan planning, ISTEA doubled federal funding for MPO operations and required the agencies to evaluate a variety of multimodal solutions to roadway congestion and other transportation problems. MPOs also were required to broaden public participation in the planning process and to see that investment decisions contributed to meeting the air quality standards of the Clean Air Act Amendments.

In addition, ISTEA placed a new requirement on MPOs to conduct “fiscally-constrained planning,” and ensure that long-range transportation plans and short-term transportation improvement programs were fiscally-constrained; in other words, adopted plans and programs can not include more projects than reasonably can be expected to be funded through existing or projected sources of revenues. This new requirement represented a major conceptual shift for many MPOs (and others in the planning community), since the imposition of fiscal discipline on plans now required, not only understanding how much money might be available, but how to prioritize investment needs and make difficult choices among competing needs. Adding to this complexity is the need to plan across transportation modes and develop approaches for multimodal investment prioritization and decision-making. It is in this context of greater prominence, funding, and requirements that MPOs function today.

An annual element is composed of transportation improvement projects contained in an area's transportation improvement program (TIP), which are proposed for implementation during the current year. The annual element is submitted to the U.S. Department of Transportation as part of the required planning process.

The passage of Safe, Accountable, Flexible, Efficient Transportation Equity Act: A Legacy for Users SAFETEA-LU in 2005 created new and revised requirements for transportation planning and programs. Although SAFETEA-LU increased standards, most MPOs already were in compliance with the regulations. Some of the planning topic areas include transportation systems security, emergency preparedness, public participation plans for metropolitan planning, and requiring the electronic publication of plans and TIP/STIP by the MPOs.

SAFETEA-LU requires that the statewide transportation planning process and the metropolitan planning process shall provide for consideration of projects and strategies that will protect and enhance the environment, promote energy conservation, improve the quality of life, and promote consistency between transportation improvements and state and local planned growth and economic development patterns [49 USC 5303(g)(3) and 23 USC 134(g)(3)].

References

  1. ^ Sanchez, Thomas W. (2006) An Inherent Bias? Geographic and Racial-Ethnic Patterns of Metropolitan Planning Organization Boards. The Brookings Institution Series on Transportation Reform. [Online at http://www.brookings.edu/reports/2006/01transportation_sanchez.aspx]
  2. ^ Committee for Determination of the State of the Practice in Metropolitan Area Travel Forecasting, Transportation Research Board of the National Academies. (2007) Metropolitan Travel Forecasting: Current Practice and Future Direction. Transportation Research Board Special Report 288. [1]
  3. ^ Bond, Alexander. "Staffing and Administrative Capacity of Metropolitan Planning Organizations". Staffing and Administrative Structure of Metropolitan Planning Organizations. CUTR/FHWA. http://www.cutr.usf.edu/programs/pcm/files/2010-05-Staffing_and_Administrative_Capacity_of_MPOs.pdf. Retrieved 9/15/2011. 
  4. ^ /kacts/kacts.htm smrpc.org
  5. ^ regionaltransportation.org

External links


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • North Front Range Metropolitan Planning Organization — Map of NFR MPO Boundary The North Front Range Metropolitan Planning Organization (NFRMPO) is an association of 15 local governments working together to improve regional transportation and air quality. The NFRMPO does long range and short range… …   Wikipedia

  • North Carolina Capital Area Metropolitan Planning Organization — The North Carolina Capital Area Metropolitan Planning Organization (NC CAMPO) is the federally required Metropolitan Planning Organization responsible for the continuous and comprehensive transportation planning process in Wake County and parts… …   Wikipedia

  • Capital Area Metropolitan Planning Organization — The Capital Area Metropolitan Planning Organization (CAMPO) is the federally required Metropolitan Planning Organization responsible for the continuous and comprehensive transportation planning process in the Austin, Texas area, including… …   Wikipedia

  • Metropolitan planning organizations of New Jersey — There are three metropolitan planning organizations (MPO) in New Jersey. The organizations are the main decision making forums for selecting projects for the Statewide Transportation Improvement Program {STIP) in deliberations involving the New… …   Wikipedia

  • Metropolitan Washington Council of Governments — The Metropolitan Washington Council of Governments (MWCOG) is a regional organization of Washington area local governments. MWCOG comprises 21 local governments in the Washington Metropolitan Area, as well as area members of the Maryland and… …   Wikipedia

  • Metropolitan Council — For other uses, see Metropolitan council (disambiguation). Metropolitan Council logo The Metropolitan Council or Met Council is the regional governmental agency and metropolitan planning organization in Minnesota serving the Twin Cities seven… …   Wikipedia

  • Metropolitan Transportation Commission (San Francisco Bay Area) — The Metropolitan Transportation Commission (MTC) is a regional planning, financing, and funding government agency in the San Francisco Bay Area. It was created in 1970 to coordinate the transit systems in the area s nine counties. For the purpose …   Wikipedia

  • Metropolitan Atlanta Rapid Transit Authority history — The Metropolitan Atlanta Rapid Transit Authority was created as the first public mass transit agency in metropolitan Atlanta. Its formation in 1965 was a result of the campaigning efforts of governmental planning agencies and Atlanta businessmen …   Wikipedia

  • Metropolitan Water District of Southern California — Water district overview Formed 1928 (1928 MM) Headquarters Los Angeles Website …   Wikipedia

  • Metropolitan Tower (Chicago) — Metropolitan Tower Pyramid and Beehive La …   Wikipedia


We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.