- ISO 14644-7
ISO 14644-7, Cleanrooms and associate controlled environments - Part 7: Separative devices (clean air hoods, gloveboxes, isolators and minienvironments) was published as an International Standard in 2004. The document was submitted as an American National Standard and has been adopted as ANSI/ IEST/ ISO 14644-7:2004.cite web
title=ISO 14644-7 Scope
This part of ISO 14644 specifies the minimum requirements for the design, construction, installation, testing and approval of
separative devicesin those respects where they differ from cleanroomsas described in ISO 14644-4and 14644-5. Separative devices range from open to closed systems.
The limitations are:
*Application-specific requirements are not addressed.
*User requirements are as agreed by customer and supplier.
*Specific processes to be accommodated in the separative device installation are not specified.
*Fire, safety and other regulatory matters are not considered specifically; the appropriate national and local requirements shall be respected.
*Full-suits are not within the scope of this standard.
Wikimedia Foundation. 2010.
Look at other dictionaries:
ISO 14644 — Standards were first formed from the US Federal Standard 209E Airborne Particulate Cleanliness Classes in Cleanrooms and Clean Zones. The need for a single standard for cleanroom classification and testing was long felt. After ANSI and IEST… … Wikipedia
ISO 14644-2 — ISO 14644 2, Cleanrooms and associated controlled environments Part 2: Specifications for testing and monitoring to prove continued compliance with ISO 14644 1 became an International Standard following the cancellation of FED STD 209E. In the… … Wikipedia
ISO 14644-1 — ISO 14644 1, Cleanrooms and associated controlled environments Part 1: Classification of air cleanliness, was the first ISO 14644 International Standard prepared by ISO Technical Committee 209 (ISO/TC 209). The document was submitted as an… … Wikipedia
ISO 14644-5 — ISO 14644 5, Cleanrooms and associate controlled environments Part 5: Operations, was published as an International Standard in 2004 and is available from IEST. The document was submitted as an American National Standard and has been adopted as… … Wikipedia
ISO 14644-3 — ISO 14644, Cleanrooms and associated controlled environments Part 3: Test Methods, is a highly referenced ISO document, helped developed by the Secretariat of ISO Technical Committee 209, IEST.cite web title=ISO 14644 3 Scope publisher=IEST… … Wikipedia
ISO 14644-6 — ISO 14644 6: Vocabulary as an important document for any contamination control professional. This document describes all the terms and definitions in all the ISO 14644 Standards and ISO 14698 Standards. In March 2008 this ISO Standard recently… … Wikipedia
ISO 14644-8 — ISO 14644 8, Cleanrooms and associate controlled environments Part 8: Classification of airborne molecular contamination became a Standard in 2006. This document was developed by the Secretariat of ISO Technical Committee 209, IESTcite web… … Wikipedia
ISO 14644-4 — ISO 14644, Cleanrooms and associated controlled environments Part 4: Design, construction and start up, was submitted as an American National Standard in 2001.cite web title=ISO 14644 4 Scope publisher=IEST year=Last updated 2007 12 03… … Wikipedia
ISO 14644-9 — ISO 14644 9, Cleanrooms and associate controlled environments Part 9: Classification of surface particle cleanliness, is currently a Committee Draft and is not yet available as a Standard. cite web title=ISO 14644 9 Scope publisher=IEST year=Last … Wikipedia
ISO 14644-2:2000 — изд.1 D TC 209 Помещения чистые и связанные с ними контролируемые среды. Часть 2. Технические требования к испытанию и мониторингу для проверки постоянного соответствия стандарту ИСО 14644 1 раздел 13.040.35 … Стандарты Международной организации по стандартизации (ИСО)