Common-mode signal

Common-mode signal

Common-mode signal is the component of an analog signal which is present with one sign on all considered conclusions. In electronics where the signal is transferred with differential voltage use, the common-mode signal is called a half-sum of voltages:

U_{cm} = \frac{U_1 + U_2}{2}

When referenced to the local common or ground, a common-mode signal appears on both lines of a 2-wire cable, in-phase and with equal amplitudes. Clearly, a common-mode signal cannot be present if one of the lines is connected to local common. Technically, a common-mode voltage is one-half the vector sum of the voltages from each conductor of a balanced circuit to local ground or common. Such signals can arise from one or more of the following sources: Radiated signals coupled equally to both lines, An offset from signal common created in the driver circuit, or A ground differential between the transmitting and receiving locations.



See also


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Common mode — is a term in engineering with at least two independent meanings. Of electrical signals, Common mode rejection ratio, the ratio of rejection of common mode signals to differential signals Common mode interference, interference that appears on both …   Wikipedia

  • Common-mode rejection ratio — The common mode rejection ratio (CMRR) of a differential amplifier (or other device) is the tendency of the devices to reject the input signals common to both input leads. A high CMRR is important in applications where the signal of interest is… …   Wikipedia

  • Common-mode interference — In telecommunication, the term common mode interference has the following meanings: Interference that appears on both signal leads (signal and circuit return), or the terminals of a measuring circuit, and ground. A form of coherent interference… …   Wikipedia

  • Common mode rejection (CMR) — A&V A measure of how well a differential amplifier rejects a signal which appears simultaneously and in phase at both input terminals. As a specification, CMR is usually stated as a dB ratio at a given frequency …   Audio and video glossary

  • Common-cause and special-cause — Type of variation Synonyms Common cause Chance cause Non assignable cause Noise Natural pattern Special cause Assignable cause Signal Unnatural pattern Common and special causes are the two distinct origins of variation in a process, as defined… …   Wikipedia

  • Mode-locking — is a technique in optics by which a laser can be made to produce pulses of light of extremely short duration, on the order of picoseconds (10−12 s) or femtoseconds (10−15 s). The basis of the technique is to induce a fixed phase… …   Wikipedia

  • Signal timing — is the technique which traffic engineers use to determine who has the right of way at an intersection. Signal timing involves deciding how much green time the traffic lights shall provide at an intersection approach, how long the pedestrian WALK… …   Wikipedia

  • Taux de rejection de mode commun — Taux de réjection du mode commun Le taux de réjection du mode commun (TRMC, ou CMRR pour Common Mode Rejection Ratio) est une valeur numérique quantifiant la capacité d un amplificateur différentiel à rejeter la tension commune de ses deux… …   Wikipédia en Français

  • Taux de rejection du mode commun — Taux de réjection du mode commun Le taux de réjection du mode commun (TRMC, ou CMRR pour Common Mode Rejection Ratio) est une valeur numérique quantifiant la capacité d un amplificateur différentiel à rejeter la tension commune de ses deux… …   Wikipédia en Français

  • Taux de réjection du mode commun — Le taux de réjection du mode commun (TRMC, ou CMRR pour Common Mode Rejection Ratio) est une valeur numérique quantifiant la capacité d un amplificateur différentiel à rejeter la tension commune de ses deux entrées. Elle est généralement exprimée …   Wikipédia en Français

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”