Hydropower

Hydropower

Hydropower, hydraulic power or water power is power that is derived from the force or energy of moving water, which may be harnessed for useful purposes.

Prior to the widespread availability of commercial electric power, hydropower was used for irrigation, and operation of various machines, such as watermills, textile machines, and sawmills. A trompe produces compressed air from falling water, which could then be used to power other machinery at a distance from the water.

History

Hydropower has been used for hundreds of years. In India, water wheels and watermills were built; in Imperial Rome, water powered mills produced flour from grain, and were also used for sawing timber and stone. The power of a wave of water released from a tank was used for extraction of metal ores in a method known as hushing. Hushing was widely used in Britain in the Medieval and later periods to extract lead and tin ores. It later evolved into hydraulic mining when used during the California gold rush.

In China and the rest of the Far East, hydraulically operated "pot wheel" pumps raised water into irrigation canals. In the 1830s, at the peak of the canal-building era, hydropower was used to transport barge traffic up and down steep hills using inclined plane railroads. Direct mechanical power transmission required that industries using hydropower had to locate near the waterfall. For example, during the last half of the 19th century, many grist mills were built at Saint Anthony Falls, utilizing the 50 foot (15 m) drop in the Mississippi River. The mills contributed to the growth of Minneapolis. Hydraulic power networks also existed, using pipes carrying pressurized liquid to transmit mechanical power from a power source, such as a pump, to end users.

Today the largest use of hydropower is for the creation of hydroelectricity, which allows low cost energy to be used at long distances from the water source.

Natural manifestations

In hydrology, hydropower is manifested in the force of the water on the riverbed and banks of a river. It is particularly powerful when the river is in flood. The force of the water results in the removal of sediment and other materials from the riverbed and banks of the river, causing erosion and other alterations.

Types

There are several forms of water power:
* Waterwheels, used for hundreds of years to power mills and machinery
* Hydroelectricity, usually referring to hydroelectric dams, or run-of-the-river setups (eg hydroelectric-powered watermills).
* Damless hydro, which captures the kinetic energy in rivers, streams and oceans.
* Tidal power, which captures energy from the tides in horizontal direction
* Tidal stream power, which does the same vertically
* Vortex power, which creates vortices which can then be tapped for energy
* Wave power, which uses the energy in waves

Hydroelectric power

Hydroelectric power now supplies about 715,000 MWe or 19% of world electricity (16% in 2003) Fact|date=May 2008. Large dams are still being designed. The world's largest is the Three Gorges Dam on the third longest river in the world, the Yangtzi River. Apart from a few countries with an abundance of hydro power, this energy source is normally applied to peak load demand, because it is readily stopped and started. It also provides a high-capacity, low-cost means of energy storage, known as "pumped storage".

Hydropower produces essentially no carbon dioxide or other harmful emissions, in contrast to burning fossil fuels, and is not a significant contributor to global warming through CO2.

Hydroelectric power can be far less expensive than electricity generated from fossil fuels or nuclear energy. Areas with abundant hydroelectric power attract industry. Environmental concerns about the effects of reservoirs may prohibit development of economic hydropower sources.

The chief advantage of hydroelectric dams is their ability to handle seasonal (as well as daily) high peak loads. When the electricity demands drop, the dam simply stores more water (which provides more flow when it releases). Some electricity generators use water dams to store excess energy (often during the night), by using the electricity to pump water up into a basin. Electricity can be generated when demand increases. In practice the utilization of stored water in river dams is sometimes complicated by demands for irrigation which may occur out of phase with peak electrical demands.

Not all hydroelectric power requires a dam; a run-of-river project only uses part of the stream flow and is a characteristic of small hydropower projects. A developing technology example is the Gorlov helical turbine.

Tidal power

Harnessing the tides in a bay or estuary has been achieved in France (since 1966), Canada and Russia, and could be achieved in other areas with a large tidal range. The trapped water turns turbines as it is released through the tidal barrage in either direction. A possible fault is that the system would generate electricity most efficiently in bursts every six hours (once every tide). This limits the applications of tidal energy; tidal power is highly predictable but not able to follow changing electrical demand.

Tidal stream power

A relatively new technology, tidal stream generators draw energy from currents in much the same way that wind generators do. The higher density of water means that a single generator can provide significant power. This technology is at the early stages of development and will require more research before it becomes a significant contributor. Several prototypes have shown promise.

Wave power

Harnessing power from ocean surface wave motion might yield much more energy than tides. The feasibility of this has been investigated, particularly in Scotland in the UK. Generators either coupled to floating devices or turned by air displaced by waves in a hollow concrete structure would produce electricity. Numerous technical problems have frustrated progress.

A prototype shore based wave power generator is being constructed at Port Kembla in Australia and is expected to generate up to 500 MWh annually. The Wave Energy Converter has been constructed (as of July 2005) and initial results have exceeded expectations of energy production during times of low wave energy. Wave energy is captured by an air driven generator and converted to electricity. For countries with large coastlines and rough sea conditions, the energy of waves offers the possibility of generating electricity in utility volumes. Excess power during rough seas could be used to produce hydrogen.

Physics

A hydropower resource can be measured according to the amount of available power, or energy per unit time. In large reservoirs, the available power is generally only a function of the hydraulic head and rate of fluid flow. In a reservoir, the head is the height of water in the reservoir relative to its height after discharge. Each unit of water can do an amount of work equal to its weight times the head.

The amount of energy , E released by lowering an object of mass , m by a height , h in a gravitational field is

:, E = mgh where , g is the acceleration due to gravity.

The energy available to hydroelectric dams is the energy that can be liberated by lowering water in a controlled way. In these situations, the power is related to the mass flow rate.

:frac{E}{t} = frac{m}{t}gh

Substituting , P for frac{E}{t} and expressing frac{m}{t} in terms of the volume of liquid moved per unit time (the rate of fluid flow , phi) and the density of water, we arrive at the usual form of this expression:

:P = ho, phi, g , h.For , P in watts, , ho is measured in kg/m³, ,phi is measured in m³/s, , g (standard gravity) is measured in m/s², and , h is measured in metres.

Some hydropower systems such as water wheels can draw power from the flow of a body of water without necessarily changing its height. In this case, the available power is the kinetic energy of the flowing water.

:P = frac{1}{2}, ho,phi, v^2 where , v is the velocity of the water,or with phi = A, v where "A" is the area through which the water passes, also:P = frac{1}{2}, ho, A, v^3.

Over-shot water wheels can efficiently capture both types of energy.

mall scale hydro power

Small scale hydro or micro-hydro power has been increasingly used as an alternative energy source, especially in remote areas where other power sources are not viable. Small scale hydro power systems can be installed in small rivers or streams with little or no discernible environmental effect on things such as fish migration. Most small scale hydro power systems make no use of a dam or major water diversion, but rather use water wheels.

There are some considerations in a micro-hydro system installation. The amount of water flow available on a consistent basis, since lack of rain can affect plant operation. Head, or the amount of drop between the intake and the exit. The more head, the more power that can be generated. There can be legal and regulatory issues, since most countries, cities, and states have regulations about water rights and easements.

Over the last few years, the U.S. Government has increased support for alternative power generation. Many resources such as grants, loans, and tax benefits are available for small scale hydro systems.

In poor areas, many remote communities have no electricity. Micro hydro power, with a capacity of 100 kW or less, allows communities to generate electricity1. This form of power is supported by various organizations such as the UK's Practical Action.

Micro-hydro power can be used directly as "shaft power" for many industrial applications. Alternatively, the preferred option for domestic energy supply is to generate electricity with a generator or a reversed electric motor which, while less efficient, is likely to be available locally and cheaply.

Resources in the United States

There is a common misconception that economically developed nations have harnessed all of their available hydropower resources. In the United States, according to the US Department of Energy, "previous assessments have focused on potential projects having a capacity of 1 MW and above". This may partly explain the discrepancy. More recently, in 2004, an extensive survey was conducted by the US-DOE which counted sources under 1 MW (mean annual average), and found that only 40% of the total hydropower potential had been developed. A total of 170 GW (mean annual average) remains available for development. Of this, 34% is within the operating envelope of conventional turbines, 50% is within the operating envelope of microhydro technologies (defined as less than 100 kW), and 16% is within the operating envelope of unconventional systems. [http://www.fieldstoneenergy.com/pdfs/US%20DepartmentofEnergy.pdf] In 2005, the US generated 1012 kilo-watt hours of electricity.The total undeveloped hydropower resource is equivalent to about one-third of total US electricity generation in 2005. Developed hydropower accounted for 6.4% of total US electricity generated in 2005.

See also

* Damless hydro
* Deep lake water cooling
* Micro hydro
* Ocean thermal energy conversion
* Pico hydro
* Renewable energy
* Trompe

References

* [http://www.itdg.org/docs/technical_information_service/micro_hydro_power.pdf Micro-hydro power] , Adam Harvey, 2004, Intermediate Technology Development Group, retrieved 1 January 2005 from http://www.itdg.org/docs/technical_information_service/micro_hydro_power.pdf.
* [http://www.eere.energy.gov/consumer/your_home/electricity/index.cfm/mytopic=11050 Microhydropower Systems] , U.S. Department of Energy, Energy Efficiency and Renewable Energy, 2005

External links

* [http://www.ich.no/ International Centre for Hydropower (ICH)] hydropower portal with links to numerous organizations related to hydropower worldwide
* [http://www.practicalaction.org/docs/technical_information_service/micro_hydro_power.pdf Practical Action (ITDG)] a UK charity developing micro-hydro power and giving extensive technical documentation.
* [http://microhydropower.net/index.php microhydropower.net]
* [http://digital.library.unt.edu/govdocs/crs/search.tkl?q=Hydropower+&search_crit=title&search=Search&date1=Anytime&date2=Anytime&type=form Congressional Research Service (CRS) Reports regarding Hydropower]
* [http://www.ashdenawards.org/case_studies?filter0=22&filter1= Ashden Awards hydro power winners]


Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • hydropower — 1933, from HYDRO (Cf. hydro ) + POWER (Cf. power) …   Etymology dictionary

  • hydropower — [hī′drō pou΄ər, hī′drəpou΄ər] n. hydroelectric power …   English World dictionary

  • hydropower plant — vandens jėgainė statusas T sritis ekologija ir aplinkotyra apibrėžtis Įrenginių kompleksas, vandens energiją verčiantis mechanine energija. Susideda iš hidraulinių variklių paleidimo ir valdymo įrenginių. atitikmenys: angl. hydropower plant;… …   Ekologijos terminų aiškinamasis žodynas

  • hydropower plant — hidroelektrinė statusas T sritis ekologija ir aplinkotyra apibrėžtis Elektrinė, vandens srauto verčianti energiją elektros energija. santrumpa( os) HE atitikmenys: angl. hydroelectric station; hydropower plant; water power station vok.… …   Ekologijos terminų aiškinamasis žodynas

  • hydropower — noun Date: 1933 hydroelectric power …   New Collegiate Dictionary

  • hydropower — /huy dreuh pow euhr/, n. hydroelectric power. [1930 35; HYDRO 1 + POWER] * * * …   Universalium

  • hydropower — noun hydroelectric power …   Wiktionary

  • hydropower — noun hydroelectric power …   English new terms dictionary

  • hydropower — hy•dro•pow•er [[t]ˈhaɪ drəˌpaʊ ər[/t]] n. hyd hydroelectric power • Etymology: 1930–35 …   From formal English to slang

  • hydropower — /ˈhaɪdroʊpaʊə/ (say huydrohpowuh) noun power generated by a hydro electric plant …  

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”