Longitudinal static stability

Longitudinal static stability

Longitudinal static stability is important in determining whether an aircraft will be able to fly as intended.

Static stability

As any vehicle moves it will be subjected to minor changes in the forces that act on it, and in its speed.
* If such a change causes further changes that tend to restore the vehicle to its original speed and orientation, without human or machine input, the vehicle is said to be statically stable. The aircraft has positive stability.
* If such a change causes further changes that tend to drive the vehicle away from its original speed and orientation, the vehicle is said to be statically unstable. The aircraft has negative stability.
* If such a change causes no tendency for the vehicle to be restored to its original speed and orientation, and no tendency for the vehicle to be driven away from its original speed and orientation, the vehicle is said to be neutrally stable. The aircraft has zero stability.

For a vehicle to possess positive static stability it is not necessary for its speed and orientation to return to exactly the speed and orientation that existed before the minor change that caused the upset. It is sufficient that the speed and orientation do not continue to diverge but undergo at least a small change back towards the original speed and orientation

Longitudinal stability

The longitudinal stability of an aircraft refers to the aircraft's stability in the pitching plane - the plane which describes the position of the aircraft's nose in relation to its tail and the horizon. (Other stability modes are directional stability and lateral stability.)

If an aircraft is longitudinally stable, a small increase in angle of attack will cause the pitching moment on the aircraft to change so that the angle of attack decreases. Similarly, a small decrease in angle of attack will cause the pitching moment to change so that the angle of attack increases.

The pilot's task

The pilot of an aircraft with positive longitudinal stability, whether it is a human pilot or an autopilot, has an easy task to fly the aircraft and maintain the desired pitch attitude which, in turn, makes it easy to control the speed, angle of attack and fuselage angle relative to the horizon. The pilot of an aircraft with negative longitudinal stability has a more difficult task to fly the aircraft. It will be necessary for the pilot devote more effort, make more frequent inputs to the elevator control, and make larger inputs, in an attempt to maintain the desired pitch attitude.

Most successful aircraft have positive longitudinal stability, providing the aircraft's center of gravity lies within the approved range. Some acrobatic and combat aircraft have low-positive or neutral stability to provide high maneuverability. Some advanced aircraft have a form of low-negative stability called relaxed stability to provide extra-high maneuverability.

Center of gravity

The longitudinal static stability of an aircraft is significantly influenced by the position of the center of gravity of the aircraft. As the center of gravity moves forward the moment arm between the horizontal stabilizer increases and the longitudinal static stability of the aircraft also increases. As the center of gravity moves aft, the longitudinal static stability of the aircraft decreases.

The limitations specified for an aircraft type and model include limitations on the most forward position, and the most aft position, permitted for the center of gravity. No attempt should be made to fly an aircraft if its center of gravity is outside the approved range, or will move outside the approved range during the flight.


Near the cruise condition most of the lift is generated by the wings, with ideally only a small amount generated by the fuselage and tail. We may analyse the longitudinal static stability by considering the aircraft in equilibrium under wing and tail lift, and weight. The moment equilibrium condition is called trim, and we are generally interested in the longitudinal stability of the aircraft about this trim condition.

Equating forces in the vertical direction::W=L_w+L_twhere W is the weight, L_w is the wing lift and L_t is the tail lift.

For a symmetrical airfoil at low angle of attack, the wing lift is proportional to the angle of attack::L_w=qS_wfrac{partial C_L}{partial alpha} (alpha-alpha_0)

where S_w is the wing area C_L is the (wing) lift coefficient, alpha is the angle of attack. The term alpha_0 is included to account for camber, which results in lift at zero angle of attack. Finally q is the dynamic pressure::q=frac{1}{2} ho v^2where ho is the air density and v is the speed.


The tailplane is usually a symmetrical airfoil, so its lift is proportional to angle of attack, but in general, there will also be an elevator deflection to maintain moment equilibrium (trim). In addition, the tail is located in the flow field of the main wing, and consequently experiences a downwash, reducing the angle of attack at the tailplane.

For a statically stable aircraft of conventional (tail in rear) configuration, the tailplane lift typically acts downward. In canard aircraft, both fore and aft planes are lifting surfaces. The fundamental requirement for static stability is that the coefficient of lift of the fore surface be greater than that of the aft surface; but even this general statement obviously does not apply to tailless aircraft. Violations of this basic principle are exploited in some high performance combat aircraft to enhance agility; artificial stability is supplied by electronic means.

The tail lift is, therefore:: L_t=q S_tleft(frac{partial C_l}{partial alpha}left(alpha-frac{partial epsilon}{partial alpha}alpha ight)+frac{partial C_l}{partial eta}eta ight)where S_t! is the tail area, C_l! is the tail lift coefficient, eta! is the elevator deflection, and epsilon! is the downwash angle.

Note that for a rear-tail configuration, the aerodynamic loading of the horizontal stabilizer (in N cdot m^{-2}!) is less than that of the main wing, so the main wing should stall before the tail, ensuring that the stall is followed immediately by a reduction in angle of attack on the main wing, promoting recovery from the stall. (In contrast, in a canard configuration, the loading of the horizontal stabilizer is greater than that of the main wing, so that the horizontal stabilizer stalls before the main wing, again promoting recovery from the stall.)

There are a few classical cases where this favourable response was not achieved, notably some early T-tail jet aircraft. In the event of a very high angle of attack, the horizontal stabilizer became immersed in the downwash from the fuselage, causing excessive download on the stabilizer, increasing the angle of attack still further. The only way an aircraft could recover from this situation was by jettisoning tail ballast or deploying a special tail parachute. The phenomenon became known as 'deep stall'.

Taking moments about the center of gravity, the net nose-up moment is::M=L_w x_g-(l_t-x_g)L_t!where x_g! is the location of the center of gravity behind the aerodynamic center of the main wing, l_t! is the tail moment arm.For trim, this moment must be zero. For a given maximum elevator deflection, there is a corresponding limit on center of gravity position at which the aircraft can be kept in equilibrium. When limited by control deflection this is known as a 'trim limit'. In principle trim limits could determine the permissible forwards and rearwards shift of the centre of gravity, but usually it is only the forward cg limit which is determined by the available control, the aft limit is usually dictated by stability.

In a missile context 'trim limit' more usually refers to the maximum angle of attack, and hence lateral acceleration which can be generated.

tatic stability

The nature of stability may be examined by considering the increment in pitching moment with change in angle of attack at the trim condition. If this is nose up, the aircraft is longitudinally unstable; if nose down it is stable. Differentiating the moment equation with respect to alpha::frac{partial M}{partial alpha}=x_gfrac{partial L_w}{partial alpha}-(l_t-x_g)frac{partial L_t}{partial alpha} Note: frac{partial M}{partial alpha} is a stability derivative.

It is convenient to treat total lift as acting at a distance h ahead of the centre of gravity, so that the moment equation may be written::M=h(L_w+L_t)!Applying the increment in angle of attack::frac{partial M}{partial alpha}=hleft(frac{partial L_w}{partial alpha}+frac{partial L_t}{partial alpha} ight)Equating the two expressions for moment increment::h=x_g-l_tfrac {frac {partial L_t}{partial alpha{frac{partial L_w}{partial alpha}+frac{partial L_t}{partial alphaThe denominator of the second term is dominated by the wing lift, so the tail lift term can be ignored, yielding::h=x_g-cleft(1-frac{partial epsilon}{partial alpha} ight)frac{frac{partial C_l}{partial alpha{frac{partial C_L}{partial alphafrac{l_t S_t}{c S_w}Where c is the mean aerodynamic chord of the main wing. The term::V=frac{l_t S_t}{c S_w}is known as the tail volume ratio. Its rather complicated coefficient, according to Piercy, has values in the range 0.5 to 0.65 for typical configurations. Hence the expression for h may be written more compactly, though somewhat approximately, as::h=x_g-0.5cV!h is known as the static margin. For stability it must be negative. (However, for consistency of language, the static margin is sometimes taken as -h, so that positive stability is associated with positive static margin.)

Neutral point

A mathematical analysis of the longitudinal static stability of a complete aircraft (including horizontal stabilizer) yields the position of center of gravity at which stability is neutral. This position is called the neutral point. (The larger the area of the horizontal stabilizer, and the greater the moment arm of the horizontal stabilizer about the aerodynamic center, the further aft is the neutral point.)

The static center of gravity margin (c.g. margin) or static margin is the distance between the center of gravity (or mass) and the neutral point. It is usually quoted as a percentage of the Mean Aerodynamic Chord. The center of gravity must lie ahead of the neutral point for positive stability (negative static margin). If the center of gravity is behind the neutral point, the aircraft is longitudinally unstable (the static margin is positive), and active inputs to the control surfaces are required to maintain stable flight. Ultimately, the position of the center of gravity relative to the neutral point determines the stability, control forces, and controllability of the vehicle.

For a tailless aircraft V=0, the neutral point coincides with the aerodynamic center, and so for longitudinal static stability the center of gravity must lie ahead of the aerodynamic center.

See also

* Directional stability
* Flight dynamics


* Clancy, L.J. (1975), "Aerodynamics", Chapter 16, Pitman Publishing Limited, London. ISBN 0 273 01120 0
* Hurt, H.H. Jr, (1960), "Aerodynamics for Naval Aviators" Chapter 4, A National Flightshop Reprint, Florida.
* Irving, F.G. (1966), "An Introduction to the Longitudinal Static Stability of Low-Speed Aircraft", Pergamon Press, Oxford, UK.
* McCormick, B.W., (1979), "Aerodynamics, Aeronautics, and Flight Mechanics", Chapter 8, John Wiley and Sons, Inc., New York NY.
* Perkins, C.D. and Hage, R.E., (1949), "Airplane Performance Stability and Control", Chapter 5, John Wiley and Sons, Inc., New York NY.
* Piercy, N.A.V. (1944), "Elementary Aerodynamics", The English Universities Press Ltd., London.

Wikimedia Foundation. 2010.

См. также в других словарях:

  • relaxed static stability — The operation of an aircraft at the center of gravity aft of the neutral point where the airplane has a negative static margin. The neutral point is that point along the path of the center of gravity movement where the stick force per knot drops… …   Aviation dictionary

  • Stability derivatives — are a means of linearising the equations of motion of an atmospheric flight vehicle so that conventional control engineering methods may be applied to assess their stability.The dynamics of atmospheric flight vehicles is potentially very… …   Wikipedia

  • Static margin — is a concept used to characterize the static stability and controllability of aircraft and missiles.*In aircraft analysis, static margin is defined as the distance between the center of gravity and the neutral point of the aircraft. *In missile… …   Wikipedia

  • Directional stability — is stability of a moving body or vehicle about an axis which is perpendicular to its direction of motion. Stability of a vehicle concerns itself with the tendency of a vehicle to return to its original direction in relation to the oncoming medium …   Wikipedia

  • Center of pressure — The center of pressure is the point on a body where the sum total of the aerodynamic pressure field acts, causing a force and no moment about that point. Mathematically it can be said that the net pressure force on the body acts through this… …   Wikipedia

  • Flight dynamics — is the science of air and space vehicle orientation and control in three dimensions. The three critical flight dynamics parameters are the angles of rotation in three dimensions about the vehicle s center of mass, known as pitch , roll and yaw… …   Wikipedia

  • Aerodynamic center — The aerodynamic center of an airfoil moving through a fluid is the point at which the pitching moment coefficient for the airfoil does not vary with lift coefficient i.e. angle of attackcite web last = Benson first = Tom coauthors = year = 2006… …   Wikipedia

  • Pitching moment — In aerodynamics, the pitching moment on an airfoil is the moment produced by the aerodynamic force on the airfoil if that aerodynamic force is considered to be applied, not at the center of pressure, but at the aerodynamic center of the airfoil.… …   Wikipedia

  • Tailless aircraft — A tailless aircraft (often tail less) traditionally has all its horizontal control surfaces on its main wing surface. It has no horizontal stabilizer either tailplane or canard foreplane (nor does it have a second wing in tandem arrangement). A… …   Wikipedia

  • EA-6B Prowler — infobox Aircraft name = EA 6B Prowler type = Electronic attack manufacturer = Grumman caption = A U.S. Navy EA 6B Prowler designer = first flight = 25 May 1968Naval Air Systems Command. Warfighters Encyclopedia. [https://wrc.navair… …   Wikipedia

Поделиться ссылкой на выделенное

Прямая ссылка:
Нажмите правой клавишей мыши и выберите «Копировать ссылку»