- Cellular data communication protocol
The protocols described here are from the Cellular Data Communication Protocol.
GSM and CDMA protocols described here include:
*BSMAP Base Station Management Application Part
*BSSAP BSS Application Part
*BSSMAP BSS Management Application Part
*BTSM Base Transceiver Station Management
*CC Call Control
*DTAP (CDMA) Direct Transfer Application Part for CDMA
*DTAP (GSM) Direct Transfer Application Part for GSM
*MM Mobility Management
Mobile IPMobile Internet Protocol
*RR Radio Resource
*SMS Short Message Service
*SMSTP Short Message Transfer Layer Protocol
In 1989, GSM responsibility was transferred to the European Telecommunication Standards Institute (ETSI), and phase I of the GSM specifications were published in 1990. Commercial service was started in mid1991, and by 1993 there were 36 GSM networks in 22 countries, with 25 additional countries having already selected or considering GSM In addition to Europe, South Africa, Australia, and many Middle and Far East countries have chosen to adopt GSM. By the beginning of 1994, there were 1.3 million subscribers worldwide. The acronym GSM now (aptly) stands for Global System for Mobile telecommunications.
From the beginning, the planners of GSM wanted ISDN compatibility in services offered and control signaling used. The radio link imposed some limitations, however, since the standard ISDN bit rate of 64 kbit/s could not be practically achieved.
The digital nature of GSM allows data, both synchronous and asynchronous data, to be transported as a
bearer serviceto or from an ISDN terminal. The data rates supported by GSM are 300 bit/s, 600 bit/s, 1200 bit/s, 2400 bit/s, and 9600 bit/s.
The most basic teleservice supported by GSM is telephony. A unique feature of GSM compared to older analog systems is the Short Message Service (SMS). Supplementary services are provided on top of teleservices or bearer services, and include features such as international roaming, caller identification,
call forwarding, call waiting, multiparty conversations, and barring of outgoing (international) calls, among others.
Code Division Multiple Access (CDMA) is a digital
air interfacestandard, claiming eight to fifteen times the capacity of traditional analog cellular systems. It employs a commercial adaptation of a military spread-spectrum technology. Based on spread spectrum theory, it gives essentially the same services and qualities as wireline service. The primary difference is that access to the local exchange carrier (LEC) is provided via a wireless phone.
Though CDMA’s application in cellular telephony is relatively new, it is not a new technology. CDMA has been used in many military applications, such as:
Anti-jamming (because of the spread signal, it is difficult to jam or interfere with a CDMA signal).Ranging (measuring the distance of the transmission to know when it will be received).Secure communications (the spread spectrum signal is very hard to detect).CDMA is a spread spectrum technology, which means that it spreads the information contained in a particular signal of interest over a much greater bandwidth than the original signal. With CDMA, unique digital codes, rather than separate RF frequencies or channels, are used to differentiate subscribers. The codes are shared by both the mobile station (cellular phone) and the base station, and are called pseudo-random code sequences. Since each user is separated by a unique code, all users can share the same frequency band (range of radio spectrum). This gives many unique advantages to the CDMA technique over other RF techniques in cellular communication.
CDMA is a digital multiple access technique and this cellular aspect of the protocol is specified by the
Telecommunications Industry Association(TIA) as IS-95. In CDMA, the BSSAP is divided into the DTAP and BSMAP (which corresponds to BSSMAP in GSM).
Wikimedia Foundation. 2010.
Look at other dictionaries:
Data transmission — Data transmission, digital transmission, or digital communications is the physical transfer of data (a digital bit stream) over a point to point or point to multipoint communication channel. Examples of such channels are copper wires, optical… … Wikipedia
communication — I (New American Roget s College Thesaurus) Act of communicating ideas Nouns 1. communication, intercourse, conversation, speech, writing, correspondence; message, tidings, news(see information). 2. communicator, messenger, nuncio; herald, crier,… … English dictionary for students
Communications protocol — For other senses of this word, see Protocol. A communications protocol is a system of digital message formats and rules for exchanging those messages in or between computing systems and in telecommunications. A protocol may have a formal… … Wikipedia
National Transportation Communications for Intelligent Transportation System Protocol — The National Transportation Communications for Intelligent Transportation System Protocol (NTCIP) is a family of standards designed to achieve interoperability and interchangeability between computers and electronic traffic control equipment from … Wikipedia
Secure Communications Interoperability Protocol — SCIP is the U.S. Government s standard for secure voice and data communication. The acronym stands for Secure Communications Interoperability Protocol and was adopted to replace the FNBDT (Future Narrowband Digital Terminal) title in 2004. SCIP… … Wikipedia
Point-to-Point Protocol — Internet protocol suite Application layer BGP DHCP DNS FTP HTTP … Wikipedia
Open Communication — In business, Open Communication (or Open Access to Communication resources) can be a term used to describe a concept that anyone, on equal conditions with a transparent relation between cost and pricing, can get access to and share communication… … Wikipedia
Microcom Networking Protocol — Abbreviated MNP. A set of communications protocols from Microcom, Inc., that has become the standard for data compression and error detection and correction, as follows: • MNP 1 to 4define hardware error control. • MNP 5 describes a… … Dictionary of networking
Voice over Internet Protocol — (VoIP, IPAEng|vɔɪp) is a protocol optimized for the transmission of voice through the Internet or other packet switched networks. VoIP is often used abstractly to refer to the actual transmission of voice (rather than the protocol implementing… … Wikipedia
Comparison of wireless data standards — A comparison of wireless data standards can be made by several different measures. Contents 1 Introduction 2 Standards 2.1 Wide Area (WAN) 2.2 Local Area (WLAN) … Wikipedia