Ethernet Way versus IEEE Way
- Ethernet Way versus IEEE Way
Ethernet and IEEE 802.3 implement a rule, known as the 5-4-3 rule is also known as the IEEE way, for the number of repeaters and segments on shared access Ethernet backbones in a tree topology. The 5-4-3 rule divides the network into two types of physical segments: populated (user) segments, and unpopulated (link) segments. User segments have users' systems connected to them. Link segments are used to connect the network's repeaters together. The IEEE way mandates that there can only be a maximum of five segments, connected through four repeaters, or hubs, and only three of the five segments may contain user connections. The Ethernet protocol requires that a signal sent out over the LAN reach every part of the network within a specified length of time. The 5-4-3 rule ensures this. Each repeater that a signal goes through adds a small amount of time to the process, so the rule is designed to minimize transmission times of the signals.
The 5-4-3 rule -- which was created when 10BASE5 and 10BASE2 were the only types of Ethernet network available -- only applies to shared-access Ethernet backbones. A switched Ethernet network should be exempt from the 5-4-3 rule because each switch has a buffer to temporarily store data and all nodes can access a switched Ethernet LAN simultaneously.
The 5-4-3 rule is also known as the IEEE way and is sometimes compared to the Ethernet way which is having 2 repeaters on the single network without having any hosts connected to a repeater.
5 Segments
4 Repeaters
3 Populated Segments
2 Unpopulated Segments
1 Collision Domain
Wikimedia Foundation.
2010.
Look at other dictionaries:
Metro Ethernet — A Metro Ethernet is a computer network that covers a metropolitan area and that is based on the Ethernet standard. It is commonly used as a metropolitan access network to connect subscribers and businesses to a larger service network or the… … Wikipedia
Computer network — Computer networks redirects here. For the periodical, see Computer Networks (journal). Datacom redirects here. For other uses, see Datacom (disambiguation). Internet map. The Internet is a global system of interconnected computer networks that… … Wikipedia
List of device bit rates — This is a list of device bit rates, or physical layer information rates, net bit rates, useful bit rates, peak bit rates or digital bandwidth capacity, at which digital interfaces of computer peripheral equipment and network devices can… … Wikipedia
USB — This article is about the computer bus to connect peripherals. For other uses of USB, see USB (disambiguation). Universal Serial Bus Original logo Type Computer Hardware Bus … Wikipedia
History of video game consoles (seventh generation) — Part of a series on … Wikipedia
Telecommunication — A parabolic satellite communication antenna at the biggest facility for satellite communication in Raisting, Bavaria, Germany … Wikipedia
Binary prefix — Prefixes for bit and byte multiples Decimal Value SI 1000 k kilo 10002 M mega … Wikipedia
PlayStation 3 — PS3 redirects here. For other uses, see PS3 (disambiguation). PlayStation 3 … Wikipedia
Microelectromechanical system oscillator — Microelectromechanical system (MEMS) oscillators are timing devices that generate highly stable reference frequencies. These reference frequencies are used to sequence electronic systems, manage data transfer, define radio frequencies, and… … Wikipedia
Network switch — A network switch or switching hub is a computer networking device that connects network segments. The term commonly refers to a multi port network bridge that processes and routes data at the data link layer (layer 2) of the OSI model. Switches… … Wikipedia
