Energy density

﻿
Energy density

Energy density is a term used for the amount of energy stored in a given system or region of space per unit volume. Often only the useful or extractable energy is quantified, which is to say that chemically inaccessible energy such as rest mass energy is ignored.[1] Quantified energy is energy that has some sort of, as the name suggests, quantified magnitude with related units.

For fuels, the energy per unit volume is sometimes a useful parameter. Comparing, for example, the effectiveness of hydrogen fuel to gasoline, hydrogen has a higher specific energy (energy per unit mass) than gasoline does, but, even in liquid form, a much lower volumetric energy density.

Energy per unit volume has the same physical units as pressure, and in many circumstances is an exact synonym: for example, the energy density of the magnetic field may be expressed as (and behaves as) a physical pressure, and the energy required to compress a compressed gas a little more may be determined by multiplying the difference between the gas pressure and the pressure outside by the change in volume. In short, pressure is a measure of volumetric enthalpy of a system. A pressure gradient has a potential to perform work on the surroundings by converting enthalpy until equilibrium is reached.

Energy density in energy storage and in fuel

Selected Energy Densities Plot

In energy storage applications the energy density relates the mass of an energy store to the volume of the storage facility, e.g. the fuel tank. The higher the energy density of the fuel, the more energy may be stored or transported for the same amount of volume. The energy density of a fuel per unit mass is called the specific energy of that fuel. In general an engine using that fuel will generate less kinetic energy due to inefficiencies and thermodynamic considerations—hence the specific fuel consumption of an engine will always be greater than its rate of production of the kinetic energy of motion.

The greatest energy source by far consists of mass itself. This energy, E = mc2, where m = ρV, ρ is the mass per unit volume, V is the volume of the mass itself and c is the speed of light. This energy, however, can be released only by the processes of nuclear fission, nuclear fusion, or the annihilation of some or all of the matter in the volume V by matter-antimatter collisions. Nuclear reactions cannot be realized by chemical reactions such as combustion. Although greater matter densities can be achieved, the density of a neutron star would approximate the most dense system capable of matter-antimatter annihilation possible. A black hole, although denser than a neutron star, doesn't have an equivalent anti-particle form.

If we thus consider the volume of the sphere around a proton defined by the extent of its electric field, we can get an approximate energy density for the proton, as seen in the table below.

The highest density sources of energy outside of antimatter are fusion and fission. Fusion includes energy from the sun which will be available for billions of years (in the form of sunlight) but so far (2011), sustained fusion power production continues to be elusive. Fission of U-235 in nuclear power plants will be available for some decades even though the vast supply of the element on earth is being depleted (peak uranium) - it might, however be possible at some future time to extract uranium from seawater.[2][3] Coal, gas, and petroleum are the current primary energy sources in the U.S.[4] but have a much lower energy density. Burning local biomass fuels supplies household energy needs (cooking fires, oil lamps, etc.) worldwide.

Energy density (how much energy you can carry) does not tell you about energy conversion efficiency (net output per input) or embodied energy (what the energy output costs to provide, as harvesting, refining, distributing, and dealing with pollution all use energy). Like any process occurring on a large scale, intensive energy use impacts the world. For example, climate change, nuclear waste storage, and deforestation may be some of the consequences of supplying our growing energy demands from fossil fuels, nuclear fission, or biomass.

No single energy storage method boasts the best in specific power, specific energy, and energy density. Peukert's Law describes how the amount of useful energy that can be obtained (for a lead-acid cell) depends on how quickly we pull it out. To maximize both specific energy and energy density, one can compute the specific energy density of a substance by multiplying the two values together, where the higher the number, the better the substance is at storing energy efficiently.

Gravimetric and volumetric energy density of some fuels and storage technologies (modified from the Gasoline article):

Note: Some values may not be precise because of isomers or other irregularities. See Heating value for a comprehensive table of specific energies of important fuels.
Note: Also it is important to realise that generally the density values for chemical fuels are without the including the weight of the oxygen required for combusiton. This is typically 2 oxygen atoms per carbon atom, and one per hydrogen atom. The <<atomic weight>> of Carbon and Oxygen are similar, while hydrogen is much lighter than oxygen. Figures are presented this way for those fuels where in pracice air would only be drawn in locally to the burner. This explains the apparently lower energy density of materials that already include their own oxidiser (such as gunpower and TNT), where the mass of the oxidant is effectivly both adding a dead weight, and absorbs some of the energy of combustion to dissociate and liberate oxygen to continue the reaction. This also explains some apparent anomalies like the energy density of a sandwich appearing to be higher than that of a stick of dynamite.

Common energy densities

The following is a list of the energy densities of commonly used energy storage materials. 1 MJ ≈ 0.28 kWh ≈ 0.37 HPh.

List of Energy Capacities of Common Storage Units

List of Energy Densities
Storage material Energy type Energy per kilogram Energy per litre Direct uses
Antimatter Matter/Antimatter 180 petajoules [5] Theoretical
Uranium 238 Nuclear 20 terajoules Electric power plants (nuclear reactors)
Hydrogen (compressed at 700 bar) Chemical 123 megajoules 5.6 megajoules Experimental automotive engines
Gasoline (petrol) Chemical 47.2 megajoules 34 megajoules Automotive engines
Diesel Chemical 45.4 megajoules 38.6 megajoules Automotive engines
Propane (including LPG) Chemical 46.4 megajoules Cooking, home heating, automotive engines
Jet fuel, Kerosene Chemical 43 megajoules 33 megajoules Jet engines
Fat (animal/vegetable) Chemical 37 megajoules Human/animal nutrition
Coal Chemical 24 megajoules Electric power plants, home heating
Carbohydrates (including sugars) Chemical 17 megajoules Human/animal nutrition
Protein Chemical 16.8 megajoules Human/animal nutrition
Wood Chemical 16.2 megajoules Heating, outdoor cooking
Lithium air battery Electrochemical 9 megajoules Portable electronic devices, electric vehicles
Carbon nanotube springs Spring (device) 7.2 megajoules [6] Theoretical
TNT Chemical 4.6 megajoules Explosives
Gunpowder Chemical 3 megajoules Explosives
Lithium battery Electrochemical 1.30 megajoules Portable electronic devices, flashlights
Lithium-ion battery Electrochemical 720 kilojoules Laptop computers, mobile devices, some modern automotive engines
Alkaline battery Electrochemical 590 kilojoules Portable electronic devices, flashlights
Supercapacitor (graphene/SWCNT electrode)[7] Electrical 560 kilojoules Electric vehicles, DC power smoothing
Sodium aqueous battery Electrochemical 367 kilojoules Load levelling, power smoothing, grid storage
Nickel-metal hydride battery Electrochemical 288 kilojoules Portable electronic devices, flashlights
Supercapacitor Electrical 100 kilojoules DC Supply smoothing
Lead-acid battery Electrochemical 100 kilojoules Automotive engine igniton
Electrostatic capacitor Electrical 360 joules Electronic circuits
Storage device Energy type Energy content Typical mass W × H × D (mm) Uses
Automotive battery (lead-acid) Electrochemical 2.6 megajoules 15 kilograms 230 × 180 × 185 Automotive starter motor and accessories
Club sandwich (Subway 6 inch) Chemical 1.3 megajoules 240 grams 150 × ? × ? Human nutrition
Alkaline "battery" (AA size) Electrochemical 15.4 kilojoules 23 grams 14.5 × 50.5 × 14.5 Portable electronic equipment, flashlights
lithium-ion battery (Nokia BL-5C) Electrochemical 12.9 kilojoules 18.5 grams 54.2 × 33.8 × 5.8 Mobile phones

Energy densities ignoring external components

This table lists energy densities of systems that require external components, such as oxidisers or a heat sink or source. These figures do not take into account the mass and volume of the required components as they are assumed to be freely available and present in the atmosphere. Such systems cannot be compared with self-contained systems.

Energy Densities Table - Energy Media Only
Storage type Specific energy (MJ/kg) Energy density (MJ/L) Peak recovery efficiency % Practical recovery efficiency %
Planck energy density 8.99 × 1010 4.633016 × 10104
Hydrogen, liquid 143 10.1
Hydrogen, compressed at 700 bar[8] 143 5.6
Hydrogen, gas 143 0.01079
Beryllium 67.6 125.1
Lithium borohydride 65.2 43.4
Boron[9] 58.9 137.8[citation needed]
Methane (1.013 bar, 15°C) 55.6 0.0378
Natural gas 53.6[10] 0.0364
LNG (NG at −160°C) 53.6[10] 22.2
CNG (NG compressed to 250 bar/~3,600 psi) 53.6[10] 9
LPG propane[11] 49.6 25.3
LPG butane[11] 49.1 27.7
Gasoline (petrol)[11] 46.4 34.2
Diesel fuel/residential heating oil [11] 46.2 37.3
Nitromethane 11.3
Polyethylene plastic 46.3[12] 42.6
Polypropylene plastic 46.4[12] 41.7
100LL Avgas 44.0[13] 31.59
Gasohol E10 (10% ethanol 90% gasoline by volume) 43.54 33.18
Lithium 43.1 23.0
Jet A aviation fuel[14]/kerosene 42.8 33
Biodiesel oil (vegetable oil) 42.20 33
DMF (2,5-dimethylfuran)[clarification needed] 42[15] 37.8
Crude oil (according to the definition of ton of oil equivalent)[clarification needed] 46.3 37[10]
Polystyrene plastic 41.4[12] 43.5
Body fat metabolism 38 35 22[16]
Butanol 36.6 29.2
Gasohol E85 (85% ethanol 10% gasoline by volume) 33.1 25.65
Graphite 32.7 72.9
Coal, anthracite[17] 32.5 72.4 36
Silicon [18] 32.2 75.1
Aluminum 31.0 83.8
Sulfur (burned to Sulfur Dioxide)[19] 9.23 19.11
Ethanol 30 24
Polyester plastic 26.0 [12] 35.6
Magnesium 24.7 43.0
Coal, bituminous[17] 24 20
PET plastic 23.5 (impure)[20]
Methanol 19.7 15.6
Hydrazine (toxic) combusted to N2+H2O 19.5 19.3
Liquid ammonia (combusted to N2+H2O) 18.6 11.5
PVC plastic (improper combustion toxic)[clarification needed] 18.0[12] 25.2
Peat briquette [21] 17.7
Sugars, carbohydrates, and protein metabolism[citation needed] 17 26.2(dextrose) 22[22]
Coal, lignite[citation needed] 14.0
Calcium[citation needed] 15.9 24.6
Glucose 15.55 23.9
Dry cowdung and cameldung 15.5[23]
Wood[24] 18.0
Sodium (burned to wet sodium hydroxide) 13.3 12.8
Battery, lithium-air rechargeable 9.0[25]
Household waste 8.0[26]
Sod peat 12.8
Sodium (burned to dry sodium oxide) 9.1 8.8
Zinc 5.3 38.0
Teflon plastic (combustion toxic, but flame retardant) 5.1 11.2
Iron (burned to iron(III) oxide) 5.2 40.68
Iron (burned to iron(II) oxide) 4.9 38.2
ANFO 3.7
Battery, zinc-air[27] 1.59 6.02
Liquid nitrogen[clarification needed] 0.77[28] 0.62
Compressed air at 300 bar (potential energy) 0.5 0.2 >50%[citation needed]
Latent heat of fusion of ice[citation needed] (thermal) 0.335 0.335
Water at 100 m dam height (potential energy) 0.001 0.001 85-90%[citation needed]
Storage type Energy density by mass (MJ/kg) Energy density by volume (MJ/L) Peak recovery efficiency % Practical recovery efficiency %

Divide Joule meter−3 with 109 to get MJ L−1.

Energy density of electric and magnetic fields

Electric and magnetic fields store energy. In a vacuum, the (volumetric) energy density (in SI units) is given by

$U = \frac{\varepsilon_0}{2} \mathbf{E}^2 + \frac{1}{2\mu_0} \mathbf{B}^2$

where E is the electric field and B is the magnetic field. In the context of magnetohydrodynamics, the physics of conductive fluids, the magnetic energy density behaves like an additional pressure that adds to the gas pressure of a plasma.

In normal (linear) substances, the energy density (in SI units) is

$U = \frac{1}{2} ( \mathbf{E} \cdot \mathbf{D} + \mathbf{H} \cdot \mathbf{B} )$

where D is the electric displacement field and H is the magnetizing field.

Energy density of empty space

In physics, "vacuum energy" or "zero-point energy" is the volumetric energy density of empty space. More recent developments have expounded on the concept of energy in empty space.

Modern physics is commonly classified into two fundamental theories: quantum field theory and general relativity. Quantum field theory takes quantum mechanics and special relativity into account, and it's a theory of all the forces and particles except gravity. General relativity is a theory of gravity, but it is incompatible with quantum mechanics. Currently these two theories have not yet been reconciled into one unified description, though research into "quantum gravity" and, more recently, stochastic electrodynamics, seeks to bridge this divide.

In general relativity, the cosmological constant is proportional to the energy density of empty space, and can be measured by the curvature of space.

Quantum field theory considers the vacuum ground state not to be completely empty, but to consist of a seething mass of virtual particles and fields. These fields are quantified as probabilities—that is, the likelihood of manifestation based on conditions. Since these fields do not have a permanent existence, they are called vacuum fluctuations. In the Casimir effect, two metal plates can cause a change in the vacuum energy density between them which generates a measurable force.

Some believe that vacuum energy might be the "dark energy" (also called Quintessence) associated with the cosmological constant in general relativity, thought to be similar to a negative force of gravity (or antigravity). Observations that the expanding universe appears to be accelerating seem to support the cosmic inflation theory—first proposed by Alan Guth in 1981—in which the nascent universe passed through a phase of exponential expansion driven by a negative vacuum energy density (positive vacuum pressure).

External references

Zero point energy

1. Eric Weisstein's world of physics: energy density[29]
2. Baez physics: Is there a nonzero cosmological constant?[30]
3. Introductory review of cosmic inflation[31]
4. An exposition to inflationary cosmology[32]

Density data

• ^ "Aircraft Fuels." Energy, Technology and the Environment Ed. Attilio Bisio. Vol. 1. New York: John Wiley and Sons, Inc., 1995. 257–259
• Fuels of the Future for Cars and Trucks” - Dr. James J. Eberhardt - Energy Efficiency and Renewable Energy, U.S. Department of Energy - 2002 Diesel Engine Emissions Reduction (DEER) Workshop San Diego, California - August 25–29, 2002

Books

• The Inflationary Universe: The Quest for a New Theory of Cosmic Origins by Alan H. Guth (1998) ISBN 0-201-32840-2
• Cosmological Inflation and Large-Scale Structure by Andrew R. Liddle, David H. Lyth (2000) ISBN 0-521-57598-2
• Richard Becker, "Electromagnetic Fields and Interactions", Dover Publications Inc., 1964

Footnotes

1. ^ http://physics.nist.gov/Pubs/SP811/sec04.html
2. ^ stormsmith.nl: Factsheet 4: Energy security and uranium reserves Quote: "...After about 60 years the world nuclear power system will fall off the 'Energy Cliff' - meaning that the nuclear system will consume as much energy as can be generated from the uranium fuel. Whether large and rich new uranium ore deposits will be found or not is unknown...Graph 1: Depletion of world known recoverable resources, 2006 - 2076...Net energy and the 'Energy Cliff' Graph 2: the energy cliff..."
3. ^ "Facts from Cohen". Formal.stanford.edu. 2007-01-26. Retrieved 2010-05-07.
4. ^ "U.S. Energy Information Administration (EIA) - Annual Energy Review". Eia.doe.gov. 2009-06-26. Retrieved 2010-05-07.
5. ^ Ken Edwards. "Propulsion and Power with Positrons. NIAC Fellows Meeting." Air Force Research Laboratory, 2004. http://www.niac.usra.edu/files/library/meetings/fellows/mar04/Edwards_Kenneth.pdf Retrieved 2011-08-31.
6. ^ Wikipedia: Carbon nanotube springs. http://en.wikipedia.org/wiki/Carbon_nanotube_springs Retrieved 2011-10-21.
7. ^ Quiang Cheng et.al. "Graphene and carbon nanotube composite electrodes for supercapacitors with ultra-high energy density" Phys. Chem. Chem. Phys., 2011, DOI: 10.1039/C1CP21910C. http://pubs.rsc.org/en/content/articlelanding/2011/cp/c1cp21910c
8. ^ "Solutions for Hydrogen Storage and Distribution" (PDF). Retrieved 2010-05-07.
9. ^ "Boron: A Better Energy Carrier than Hydrogen? (28 February 2009)". Eagle.ca. Retrieved 2010-05-07.
10. ^ a b c d Envestra Limited. Natural Gas. Retrieved 2008-10-05.
11. ^ a b c d IOR Energy. List of common conversion factors (Engineering conversion factors). Retrieved 2008-10-05.
12. ^ a b c d e http://www.aquafoam.com/papers/selection.pdf
14. ^ "Energy Density of Aviation Fuel". Hypertextbook.com. Retrieved 2010-05-07.
15. ^ Nature. "Production of dimethylfuran for liquid fuels from biomass-derived carbohydrates : Abstract". Nature. Retrieved 2010-05-07.
16. ^ Justin Lemire-Elmore (2004-04-13). "The Energy Cost of Electric and Human-Powered Bicycles". p. 5. Retrieved 2009-02-26. "properly trained athlete will have efficiencies of 22 to 26%"
17. ^ a b Fisher, Juliya (2003). "Energy Density of Coal". The Physics Factbook. Retrieved 2006-08-25.
18. ^ http://dbresearch.com/PROD/DBR_INTERNET_EN-PROD/PROD0000000000079095.pdf
19. ^ Anne Wignall and Terry Wales. Chemistry 12 Workbook, page 138. Pearson Education NZ ISBN 978 0 582 54974 6
20. ^ "Elite_bloc.indd" (PDF). Retrieved 2010-05-07.
21. ^ Bord na Mona, Peat for Energy
22. ^ http://www.ebikes.ca/sustainability/Ebike_Energy.pdf
23. ^ "energy buffers". Home.hccnet.nl. Retrieved 2010-05-07.
24. ^ "Biomass Energy Foundation: Fuel Densities". Woodgas.com. Retrieved 2010-05-07.
25. ^ Mitchell, Robert R.; Betar M. Gallant; Carl V. Thompson; Yang Shao-Horn (2011). "All-carbon-nanofiber electrodes for high-energy rechargeable Li–O2 batteries". Energy & Environmental Science 4: 2952–2958. doi:10.1039/C1EE01496J.
26. ^ David E. Dirkse. energy buffers. "household waste 8..11 MJ/kg"
27. ^
28. ^ C. Knowlen, A.T. Mattick, A.P. Bruckner and A. Hertzberg, "High Efficiency Conversion Systems for Liquid Nitrogen Automobiles", Society of Automotive Engineers Inc, 1988.
29. ^ "Energy Density - from Eric Weisstein's World of Physics". Scienceworld.wolfram.com. Retrieved 2010-05-07.
30. ^ What's the Energy Density of the Vacuum?
31. ^ Shinji Tsujikawa (2003-04-28). "Introductory review of cosmic inflation". arXiv:hep-ph/0304257 [hep-ph].
32. ^ Scott Watson (2000). "An Exposition on Inflationary Cosmology". arXiv:astro-ph/0005003 [astro-ph].

Wikimedia Foundation. 2010.

Look at other dictionaries:

• Energy Density —   The ratio of available energy per pound; usually used to compare storage batteries.   ***   The ratio of energy available from a battery to its volume (Wh/1) or mass (Wh/kg). watts to weight ratio.   Solar Electric Glossary …   Energy terms

• energy density — energijos tankis statusas T sritis Standartizacija ir metrologija apibrėžtis Energijos kiekis, sukauptas vienetiniame erdvės (dažniausiai tūrio) mate. Matavimo vienetas: J/m³. atitikmenys: angl. energy density vok. Energiedichte, f rus. плотность …   Penkiakalbis aiškinamasis metrologijos terminų žodynas

• energy density — energijos tankis statusas T sritis fizika atitikmenys: angl. energy density vok. Energiedichte, f rus. плотность энергии, f pranc. densité d’énergie, f …   Fizikos terminų žodynas

• energy density — noun : the amount of energy (as in a beam of radiation) per unit volume …   Useful english dictionary

• Energy density — Плотность энергии …   Краткий толковый словарь по полиграфии

• Sound energy density — The sound energy density or sound density (symbol E or w ) is an adequate measure to describe the sound field at a given point as a sound energy value. The letter lower case w sign w is easily mixed with the sign omega (omega), therefore we… …   Wikipedia

• Distortion free energy density — The Distortion free energy density is a quantity that describes the distortion of a liquid crystal from its preferred state in which all of the liquid crystal molecules are aligned parallel to one common axis. It also commonly goes by the name… …   Wikipedia

• Strain energy density function — A strain energy density function or stored energy density function is a scalar valued function that relates the strain energy density of a material to the deformation gradient. : W = ar{W}(oldsymbol{F}) = hat{W}(oldsymbol{C}) =… …   Wikipedia

• Orders of magnitude (specific energy density) — This is a table of specific energy densities by magnitude. Unless otherwise noted, these values assume standard ambient temperature and pressure. List of orders of magnitude for specific energy density Order of magnitude J/(kg) Specific energy… …   Wikipedia

• Sound energy density level — The sound energy density level gives the ratio of a sound incidence as a sound energy value in comparison to a reference level of 0 dB (DIN 45630). It is a logarithmic measure of the ratio of two sound energy densities. Definition The sound… …   Wikipedia