Equivalence point


Equivalence point

Equivalence point or stoichiometric point occurs during a chemical titration when the amount of titrant added is equivalent, or equal, to the amount of analyte present in the sample. In some cases there are multiple equivalence points which are multiples of the first equivalent point, such as in the titration of a diprotic acid. A graph of the titration curve exhibits an inflection point at the equivalence point. A striking fact about equivalence is that in a reaction the equivalence of the reactants as well as products is conserved.

Acid-base titration example

Equivalence point occurs during an acid-base titration when stoichiometrically equivalent quantities of acid and base have been reacted. A graph of pH against concentration becomes almost vertical at the equivalence point. The equivalence point of a titration does not mean that the solution has reached pH 7; merely that all the initial reactants have been reacted. The actual pH of the solution at equivalence point is determined by considering the acidity or alkalinity of the aqueous product of the reaction, most commonly by the Brønsted-Lowry Theory of acids and bases.

When performing a manual titration, it may be difficult or impossible to detect when the equivalence point is reached. Often a pH indicator is added to the reaction vessel with an endpoint that is very close to the equivalence point. This causes a visible color change (the endpoint) at the equivalence point and therefore at the point that no more titrant should be added.

Acid-base titrations are commonly taught in school and are the most familiar form of titration, however, it is only one of numerous forms of titration.

Methods to determine the equivalence point

Different methods to determine the equivalence point include:;pH indicator: This is a substance that changes colour in response to a chemical change. An acid-base indicator (e.g., phenolphthalein) changes colour depending on the pH. Redox indicators are also frequently used. A drop of indicator solution is added to the titration at the start; when the colour changes the endpoint has been reached, this is an approximation of the equivalence point.;Potentiometer: A potentiometer can also be used. This is an instrument which measures the electrode potential of the solution. These are used for titrations based on a redox reaction; the potential of the working electrode will suddenly change as the equivalence point is reached.;pH meter: This is a potentiometer which uses an electrode whose potential depends on the amount of H+ ion present in the solution. (This is an example of an ion selective electrode. This allows the pH of the solution to be measured throughout the titration. At the equivalence point there will be a sudden change in the measured pH. It can be more accurate than the indicator method, and is very easily automated.;Conductance: The conductivity of a solution depends on the ions that are present in it. During many titrations, the conductivity changes significantly. (For instance, during an acid-base titration, the H+ and OH- ions react to form neutral H2O. This changes the conductivity of the solution.) The total conductance of the solution depends also on the other ions present in the solution (such as counter ions). Not all ions contribute equally to the conductivity; this also depends on the mobility of each ion and on the total concentration of ions (ionic strength). Thus, predicting the change in conductivity is harder than measuring it.;Color change: In some reactions, the solution changes colour without any added indicator. This is often seen in redox titrations, for instance, when the different oxidation states of the product and reactant produce different colours.;Precipitation: If the reaction forms a solid, then a precipitate will form during the titration. A classic example is the reaction between Ag+ and Cl- to form the very insoluble salt AgCl. Surprisingly, this usually makes it difficult to determine the endpoint precisely. As a result, precipitation titrations often have to be done as back titrations.;Isothermal titration calorimeter: An isothermal titration calorimeter uses the heat produced or consumed by the reaction to determine the equivalence point. This is important in biochemical titrations, such as the determination of how substrates bind to enzymes.;Thermometric titrimetry: Thermometric titrimetry is an extraordinarily versatile technique. This is differentiated from calorimetric titrimetry by the fact that the heat of the reaction (as indicated by temperature rise or fall) is not used to determine the amount of analyte in the sample solution. Instead, the equivalence point is determined by "the rate of temperature change". Because thermometric titrimetry is a relative technique, it is not necessary to conduct the titration under isothermal conditions, and titrations can be conducted in plastic or even glass vessels, although these vessels are generally enclosed to prevent stray draughts from causing "noise" and disturbing the endpoint. Because thermometric titrations can be conducted under ambient conditions, they are especially well-suited to routine process and quality control in industry. Depending on whether the reaction between the titrant and analyte is exothermic or endothermic, the temperature will either rise or fall during the titration. When all analyte has been consumed by reaction with the titrant, a change in the rate of temperature increase or decrease reveals the equivalence point and an inflection in the temperature curve can be observed. The equivalence point can be located precisely by employing the second derivative of the temperature curve. The software used in modern automated thermometric titration systems employ sophisticated digital smoothing algorithms so that "noise" resulting from the highly sensitive temperature probes does not interfere with the generation of a smooth, symmetrical second derivative "peak" which defines the endpoint. The technique is capable of very high precision, and coefficients of variance (CV's) of less than 0.1 are common. Modern thermometric titration temperature probes consist of a thermistor which forms one arm of a Wheatstone bridge. Coupled to high resolution electronics, the best thermometric titration systems can resolve temperatures to 10-5K. Sharp equivalence points have been obtained in titrations where the temperature change during the titration has been as little as 0.001K. The technique can be applied to essentially any chemical reaction in a fluid where there is an enthalpy change, although reaction kinetics can play a role in determining the sharpness of the endpoint. Thermometric titrimetry has been successfully applied to acid-base, redox, EDTA, and precipitation titrations. Examples of successful precipitation titrations are sulfate by titration with barium ions, phosphate by titration with magnesium in ammoniacal solution, chloride by titration with silver nitrate, nickel by titration with dimethylglyoxime and fluoride by titration with aluminium (as K2NaAlF6) Because the temperature probe does not need to be electrically connected to the solution (as in potentiometric titrations), non-aqueous titrations can be carried out as easily as aqueous titrations. Solutions which are highly colored or turbid can be analyzed by thermometric without further sample treatment. The probe is essentially maintenance-free. Using modern, high precision stepper motor driven burettes, automated thermometric titrations are usually complete in a few minutes, making the technique an ideal choice where high laboratory productivity is required. ;Spectroscopy: Spectroscopy can be used to measure the absorption of light by the solution during the titration, if the spectrum of the reactant, titrant or product is known. The relative amounts of the product and reactant can be used to determine the equivalence point. Alternately, the presence of free titrant (indicating that the reaction is complete) can be detected at very low levels.;Amperometry: Amperometry can be used as a detection technique (amperometric titration). The current due to the oxidation or reduction of either the reactants or products at a working electrode will depend on the concentration of that species in solution. The equivalence point can then be detected as a change in the current. This method is most useful when the excess titrant can be reduced, as in the titration of halides with Ag+. (This is handy also in that it ignores precipitates.)

External links

* [http://www2.iq.usp.br/docente/gutz/Curtipot_.html Equivalence points of virtual and real acid-base titrations - Software Program]


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • equivalence point — equivalence point, a condition in which the substances required for a chemical reaction are all present in precisely the amounts required for a complete reaction …   Useful english dictionary

  • equivalence point — lygiavertiškumo taškas statusas T sritis Standartizacija ir metrologija apibrėžtis Titravimo kreivės taškas, kuriame titruojamosios medžiagos ir titranto kiekiai yra lygiaverčiai. atitikmenys: angl. equivalence point vok. Äquivalenzpunkt, m rus.… …   Penkiakalbis aiškinamasis metrologijos terminų žodynas

  • equivalence point — lygiavertiškumo taškas statusas T sritis fizika atitikmenys: angl. equivalence point vok. Äquivalenzpunkt, m rus. точка эквивалентности, f pranc. point d’équivalence, m …   Fizikos terminų žodynas

  • equivalence point — ekvivalentinis taškas statusas T sritis chemija apibrėžtis Titravimo kreivės taškas, kuriame titruojamosios medžiagos ir titranto kiekiai yra ekvivalentiški. atitikmenys: angl. end point; equivalence point rus. точка эквивалентности;… …   Chemijos terminų aiškinamasis žodynas

  • Equivalence — or equivalent may refer to: In chemistry: Equivalent (chemistry) Equivalence point Equivalent weight In computing: Turing equivalence (theory of computation) In ethics: Moral equivalence In history: The Equivalent, a sum paid from England to… …   Wikipedia

  • point d’équivalence — lygiavertiškumo taškas statusas T sritis Standartizacija ir metrologija apibrėžtis Titravimo kreivės taškas, kuriame titruojamosios medžiagos ir titranto kiekiai yra lygiaverčiai. atitikmenys: angl. equivalence point vok. Äquivalenzpunkt, m rus.… …   Penkiakalbis aiškinamasis metrologijos terminų žodynas

  • point d’équivalence — lygiavertiškumo taškas statusas T sritis fizika atitikmenys: angl. equivalence point vok. Äquivalenzpunkt, m rus. точка эквивалентности, f pranc. point d’équivalence, m …   Fizikos terminų žodynas

  • Equivalence — Équivalence Voir « équivalence » sur le Wiktionnaire …   Wikipédia en Français

  • Equivalence ricardienne — Équivalence ricardienne L’« équivalence ricardienne » ou la « neutralité ricardienne » est une théorie économique. Elle est également appelée « effet Ricardo Barro » ou « théorème d équivalence de Ricardo… …   Wikipédia en Français

  • équivalence — [ ekivalɑ̃s ] n. f. • 1361; bas lat. æquivalentia, de æquivalere 1 ♦ Qualité de ce qui est équivalent. ⇒ adéquation, égalité, homologie, identité. Les jacqueries « mettent en avant un principe d équivalence, vie contre vie » (Camus). ♢ (1864)… …   Encyclopédie Universelle


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.