Cis-trans isomerism

Cis-trans isomerism

In chemistry, cis-trans isomerism or geometric isomerism or configuration isomerism is a form of stereoisomerism describing the orientation of functional groups within a molecule. In general, such isomers contain double bonds, which cannot rotate, but they can also arise from ring structures, wherein the rotation of bonds is greatly restricted.

The term "geometric isomerism" is considered an obsolete synonym of "cis-trans isomerism" by IUPAC. It is sometimes used as a synonym for general stereoisomerism (e.g., optical isomerism being called geometric isomerism); the correct term for non-optical stereoisomerism is diastereomerism.

There are two forms of a cis-trans isomer, the "cis" and "trans" versions. When the substituent groups are oriented in the same direction, the diastereomer is referred to as "cis", whereas, when the substituents are oriented in opposing directions, the diastereomer is referred to as "trans". An example of a small hydrocarbon displaying cis-trans isomerism is 2-butene.

Alicyclic compounds can also display cis-trans isomerism. As an example of a geometric isomer due to a ring structure, consider 1,2-dichlorocyclohexane:

Cis vs trans physical properties

Cis isomers and trans isomers often have different physical properties. Differences between isomers, in general, arise from the differences in the shape of the molecule or the overall dipole moment. These differences can be very small, as in the case of the boiling point of straight-chained alkenes, such as pent-2-ene, wherein the trans isomer has a boiling point of 36°C and cis isomer is 37°C [ [ Chemicalland values] ] . The differences between cis and trans isomers can also be quite large, as in the case of cyclooctene. The cis isomer in this case has a boiling point of 145°C [ [ Akros data] ] , while the trans isomer has a boiling point of 75°C. [Organic Syntheses, Coll. Vol. 5, p.315 (1973); Vol. 49, p.39 (1969) [ Link] ] The large difference between the two isomers of cyclooctene arises from the large ring strain for trans-cyclooctene, which also makes it significantly less stable than the cis isomer. In fact, the two isomers of 2-butenedioic acid have such large differences in properties and reactivities that they were actually given completely different names. The cis isomer is called maleic acid and the trans is named fumaric acid. Polarity is key in determining relative boiling point as it causes increased intermolecular forces, thereby raising the boiling point. In the same manner, symmetry is key in determining relative melting point as it allows for better packing in the solid state. Thus, trans-alkenes which are less polar and more symmetrical have lower boiling points and higher melting points and cis-alkenes, which are generally more polar and less symmetrical have higher boiling points and lower melting points.

In the case of geometric isomers that are a consequence of double bonds, and, in particular, when both substituents are the same, some general trends usually hold. These trends can be attributed to the fact that the dipoles of the substituents in a cis isomer will add up to give an overall molecular dipole. In a trans isomer, the dipoles of the substituents will cancel out Fact|date=February 2007 due to their being on opposite site of the molecule. Trans isomers also tend to have lower densities than their cis counterparts.Fact|date=February 2007

March ["Advanced organic Chemistry, Reactions, mechanisms and structure" 3ed. page 111 Jerry March ISBN 0-471-85472-7] observes that, as trans alkenes, in general, have more symmetry than cis alkenes, the trans alkenes also tend to have higher melting points and lower solubility in inert solvents.

Vicinal coupling constants (3JHH), measured by NMR spectroscopy, are larger for trans- (range: 12-18 Hz, typical: 15 Hz) than for cis- (range: 0-12 Hz, typical: 8 Hz) isomers. ["Spectroscopic Methods in Organic Chemistry," Dudly H. WIlliams and Ian FLeming, 4th ed. revised,McGraw-Hill Book COmpany (UK) Limited, 1989.Table 3.27]


Usually, trans isomers are more stable than the cis isomers. This is partly due to their shape, the straighter shape of the trans isomer leads to hydrogen intermolecular forces that make the isomer more stable Fact|date=February 2008. According to March, trans isomers also have a lower heat of combustion, indicating higher thermochemical stability. In the Benson Heat of formation group additivity, dataset cis isomers suffer a 1.10 kcal/mol stability penalty. Exceptions to this rule exist. For instance, for 1,2-difluoroethylene, 1,2-difluorodiazene (FN=NF), and several other halogen- and oxygen-substituted ethylenes. In this case, the cis isomer is more stable than the trans isomer. ["The stereochemical consequences of electron delocalization in extended .pi. systems. An interpretation of the cis effect exhibited by 1,2-disubstituted ethylenes" and related phenomena Richard C. Bingham J. Am. Chem. Soc.; 1976; 98(2); 535-540 [ Abstract] ] This phenomenon is called the cis effect. ["Contribution to the Study of the Gauche Effect. The Complete Structure of the Anti Rotamer of 1,2-Difluoroethane" Norman C. Craig et al. J. Am. Chem. Soc.; 1997; 119 p 4789 DOI|10.1021/ja963819e]

E/Z notation

The cis/trans system for naming isomers is not effective when there are more than two different substituents on a double bond. The E/Z notation should then be used. Z (from the German _de. "zusammen") means "together" and corresponds to the term "cis"; E (from the German _de. "entgegen") means "opposite" and corresponds to the term "trans".

Whether a molecular configuration is designated E or Z is determined by the Cahn-Ingold-Prelog priority rules (higher atomic numbers are given higher priority). For each of the two atoms in the double bond, it is necessary to determine which of the two substituents is of a higher priority. If both of the substituents of higher priority are on the same side, the arrangement is "Z"; if they are on opposite sides, the arrangement is "E".

External links

* [ The IUPAC definition of "stereoisomerism"]
* [ The IUPAC definition of "geometric isomerism"]
* [ The IUPAC definition of "cis-trans isomers"]

ee also

*Structural isomerism
*Chirality (chemistry)
*Trans fat


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Cis–trans isomerism — Cis but 2 ene Trans but 2 ene In organic che …   Wikipedia

  • cis-trans isomerism — noun a form of geometric isomerism in which one isomer has the cis and the other has the trans configuration …   Wiktionary

  • cis-trans isomerism — /ˌsɪs trænz aɪˈsɒmərɪzəm/ (say .sis tranz uy somuhrizuhm) noun a form of isomerism occurring in a molecule which is rigid because it contains a double bond or ring system. The cis isomer has specific groups on the same side, and the trans isomer… …   Australian English dictionary

  • cis-trans isomerism — noun : geometric isomerism in unsaturated compounds or cyclic compounds depending usually on the presence in the molecule of a pair of substituted groups (as unsymmetrically substituted methylene groups) so that the isomers have comparable… …   Useful english dictionary

  • cis-trans isomerism — geometric i …   Medical dictionary

  • cis-trans — ˈsi|stran(t)s, nz adjective Etymology: cis + trans : relating to, exhibiting, or being a particular type of stereoisomerism see cis trans isomerism …   Useful english dictionary

  • Cis — For acronyms, see CIS (disambiguation). Cis may have the following meanings: Cis as a prefix of Latin origin, meaning on the same side [as] or on this side [of] , with several derived usages: In chemistry, cis refers to cis trans isomerism In… …   Wikipedia

  • cis — adjective /sɪs/ a) Having two mutations on two genes on the same chromosome of a homologous pair. b) (properly cis ) Describing a double bond in which the greater radical on both ends is on the same side of the bond. See Also: cis , cisalpine …   Wiktionary

  • cis- — 1. a prefix denoting relative nearness: cisalpine; cismontane. 2. Chemistry a prefix denoting the nearness of identical atoms or groups attached on the same side of two atoms linked by a double bond. See cis trans isomerism. {Latin cis this side… …   Australian English dictionary

  • trans- — 1. a prefix meaning across , beyond , freely applied in geographical terms (transcontinental, trans Australian), also found attached to stems not used as words, and in figurative meanings, as transpire, transport, transcend. 2. a prefix meaning… …   Australian English dictionary