Mortiser

Mortiser
Hollow mortising chisel and bit

A mortiser or morticer is a specialized woodworking machine used to cut square or rectangular holes in a piece of lumber, such as a mortise in a mortise and tenon joint.

Contents

Square chisel mortiser

The square chisel mortiser (also called hollow chisel mortiser), similar to a drill press in many respects, combines the cutting of a four-sided chisel with the action of a drill bit in the center. The bit clears out most of the material to be removed, and the chisel ensures the edges are straight and clean. This device was invented in 1874 by Robert and Ralph Greenlee (founders of the Greenlee Company).

Square chisel mortising bits can also be fitted to normal drill presses using a mortising attachment.

The Greenlee Company still manufactures mortisers, as do a large number of other power tool manufacturers. It is a common tool in the woodshop of professional woodworkers, but because of its specialized nature, many amateur woodworkers would not make enough use of it to justify the moderately high cost and space this tool takes up in the woodshop. Some smaller and less expensive models, suitable for cutting only narrow mortises are available.

Horizontal mortiser (slot mortiser)

A more recent innovation is the horizontal mortiser, which incorporates a router mounted statically on its side with the workpiece clamped to a multi-axis sliding table. This type of mortiser can produce either traditional mortise and tenon pairs, however it excels at floating (or 'loose') tenons. A floating tenon is where both the pieces of wood that are to be joined have aligned mortises cut into them and a separate piece of wood is milled into a fitted tenon which is glued into the two mortises.

Chain mortiser

For cutting larger mortises such as those used in timber frame construction, chain mortisers are commonly used. A chain with cutters (similar to a chainsaw chain) rotating within a frame clamped to the work is successively plunged into the workpiece to mortise out the required volume. The Makita 7104L is such a tool. These chains are made in varying widths, with numbers of chains in parallel. The teeth are often solid or tipped tungsten carbide. They are thus very expensive, sometimes as much as the rest of the mortiser.

Other methods of cutting mortises

The Reuleaux triangle rotating inside a constant sized square

Traditionally, a mortise would be cut by hand, using a chisel and mallet. However, due to the precision of fit required for a mortise and tenon joint, this can be a difficult and time-consuming task.

Other tools such as a router could be used for the task, but the router usually requires special attachments, jigs or templates and the router bit leaves rounded corners that might need to be squared by hand with a chisel. Alternatively, the tenon can be rounded with a rasp to achieve an equally strong joint.

For cutting small mortises, a normal drill bit can be used. However, for larger mortises, a common type of bit in modern mortisers is a Harry Watt square drill bit, in which a bit with a Reuleaux triangle cross section is allowed to "wobble" while it rotates within a square with rounded corners (compare to the motion of a Wankel engine). This type of bit removes all but the corners of the material to be removed, leaving very little to be cut by the chisel.

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • mortiser — n. woodworking tool for making many joints in wood …   English contemporary dictionary

  • mortiser — mor·tis·er …   English syllables

  • mortiser — sə(r) noun ( s) 1. : one that mortises by hand or by machine 2. : a woodworking machine for cutting mortises * * * morˈtiser or morˈticer noun • • • Main Entry: ↑mortis …   Useful english dictionary

  • Type mortiser — Станок для пробивки отверстий в стереотипе …   Краткий толковый словарь по полиграфии

  • mortise — mortiser, n. /mawr tis/, n., v., mortised, mortising. n. 1. a notch, hole, groove, or slot made in a piece of wood or the like to receive a tenon of the same dimensions. 2. a deep recess cut into wood for any of several other purposes, as for… …   Universalium

  • Combination machine — A combination machine is a woodworking machine that combines the functions of two or more separate machines into a single unit. For example, a combination machine might consist of a tablesaw with a side mounted jointer. Another common example of… …   Wikipedia

  • Woodworking machine — A Woodworking machine is a machine that is intended to process wood. These machines are usually powered by electric motors and are used extensively in woodworking. Sometimes grinding machines (for grinding woodworking tools) are also considered a …   Wikipedia

  • Milling cutter — Milling cutters are cutting tools typically used in milling machines or machining centres (and occasionally in other machine tools). They remove material by their movement within the machine (e.g., a ball nose mill) or directly from the cutter s… …   Wikipedia

  • Bench dog — Dog hole redirects here. For the cave in Cumbria, England, see Dog Hole Cave. A wooden bench dog with a hickory spring clamped in a metal vice for display. Note also the steel dog that is integral to the metal vice …   Wikipedia

  • Hezekiah Bradley Smith — Infobox Congressman name = Hezekiah Bradley Smith width = state = New Jersey district = 2nd party = Democrat term = March 4, 1879 ndash; March 3, 1881 preceded = John H. Pugh succeeded = J. Hart Brewer date of birth = July 24, 1816 place of birth …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”