MG MGB


MG MGB

Infobox Automobile
name = MGB


layout = FR layout
manufacturer = MG Cars
parent_company = British Motor Corporation
British Motor Holdings
British Leyland
production = 1962-1980
predecessor = MGA
successor = MG RV8
class = Sports car
assembly = Abingdon, England

The MGB was Britain's best-selling sports car model Fact|date=March 2008. Launched in May 1962 to replace the MGA, the MGB was manufactured until 22 October 1980 — originally by the British Motor Corporation and under the MG marque. MGB production continued throughout restructuring of the British motor industry, and the parent company’s transition from BMC to British Motor Holdings (in 1966) and to British Leyland Motor Corporation (in 1968).

__TOC__

Originally introduced as a convertible, a coupé ("GT") version was introduced in 1965. The MGB featured a four cylinder engine. A derivative model, called the "MGC" featured a six cylinder engine and a limited production variant, called the "MGB GT V8" fitted with the ex-Buick Rover V8 engine was made from 1973 to 1976. Combined production volume of MGB, MGC and MGB GT V8 models was 523,836 cars. A very limited-production derivative model with only 2,000 units made, called "RV8" was produced by Rover in the 1990s. Despite the similarity in appearance, the RV8 had less than 5% parts interchangeability with the original car.

The MGB was a relatively modern design at the time of its introduction. It utilized a unibody/monocoque structure that reduced both weight and manufacturing costs as well as adding chassis strength. This was a considerable improvement in comparison to that of the traditional body-on-frame construction used on the earlier MGA and T-type models as well as the MGB's rival, the Triumph TR series. The design included wind-up windows and a comfortable driver's compartment, with plenty of legroom and a parcel shelf behind the seats.

The MGB's performance was brisk for the period, with a 0 to 60 mph (96 km/h) time of just over 11 seconds, aided by the relatively light weight of the car. Handling was one of the MGB’s strong points. The 3-bearing 1798 cc B-Series engine produced 95 hp (71 kW) at 5400 rpm. The engine was upgraded in October 1964 to a five-bearing crankshaft in an effort to improve reliability. A majority of MGBs were exported to United States. In 1974, as US air pollution emission standards became more rigorous, US-market MGBs were de-tuned for compliance. As well as a marked reduction in performance, the MGB gained 1" in ride height and the distinctive rubber bumpers.

The MGB was one of the first cars to feature controlled crumple zones designed to protect the driver and passenger in a 30 mph (48 km/h) impact with an immovable barrier (200 ton).cite web
title = MG/MGB/Chassis Info
publisher = Conceptcarz.com
url = http://www.conceptcarz.com/vehicle/chassisNum.aspx?carID=9759&iDNumID=428
]

[http://www.mgb-stuff.org.uk/body.htm#2 See: 1967 MGB 30mph frontal impact into a concrete block, Abingdon in 1967 (scroll down)]

MGB Roadster

Infobox Automobile generation
name = MGB Roadster


production = 1962-1980
399,070 made
body_style = 2-door roadster
clearance = Auto mm|114.3|1
engine = 1798 cc "B-Series" I4
length = Auto mm|3886|1
Auto mm|4019|1 rubber bumper versioncite book |last=Culshaw |first= |authorlink= |coauthors=Horrobin |title=Complete Catalogue of British Cars |year=1974 |publisher=Macmillan |location=London |id=ISBN 0-333-16689-2]
width = Auto mm|1524|1
height = Auto mm|1219|1
Auto mm|1295|1 rubber bumper version

The roadster was the first of the MGB range to be produced. The body was a pure two-seater but a small rear seat was a rare optional extra at one point. By making better use of space the MGB was able to offer more passenger and luggage accommodation than the earlier MGA while being 3 inches (75 mm) shorter overall. The suspension was also softer, giving a smoother ride, and the larger engine gave a slightly higher top speed. Wheel diameter dropped from 15 to convert|14|in|mm.

Mk II

In late 1967, sufficient changes were introduced for the factory to define a Mk II model. Changes included synchromesh on all 4 gears with revised ratios, an optional Borg-Warner automatic gearbox (except in the US), a new rear axle and an alternator in place of the dynamo. To accommodate the new gearboxes there were significant changes to the sheet metal in the floorpan, and a new flat-topped transmission tunnel. All models are rear-wheel drive. To meet US safety regulations, later North American tourers got three windshield wipers instead of just two (to sweep the required percentage of the glass), and also received a plastic and foam rubber covered "safety" dashboard, dubbed the "Abingdon pillow". Other markets continued with the steel dash. Rubery Owen "ROstyle" wheels were introduced to replace the previous pressed steel versions in 1969 and reclining seats were standardized in 1970. 1969 also saw a new front grille, recessed, in black aluminium. The more traditional-looking polished grille returned in 1972 with a black 'honeycomb' insert. 1970 saw split rear bumpers with the number-plate in between, 1971 returned to the earlier five-piece style.

Mk III

Further changes in 1972 brought about the Mk III. The main changes were to the interior with a new fascia and improved heater.

In 1974, in order to meet US impact regulations, US models had the chrome bumper overriders replaced with large rubber ones, and in the second half of 1974 the chrome bumpers were replaced altogether. A new, steel-reinforced black rubber bumper at the front incorporated the grille area as well, giving a major restyling to the B's nose, and a matching rear bumper completed the change. New US headlight height regulations also meant that the headlamps were now too low. Rather than redesign the front of the car, British Leyland raised the car's suspension by convert|1|in|mm|sing=on. This, in combination with the new, far heavier bumpers resulted in significantly poorer handling. For the 1975 model year only, the front anti-roll bar was deleted from the standard car as a cost-saving measure (though it was still available as an option). The damage done by the British Leyland response to US legislation was partially alleviated by further revisions to the suspension geometry in 1977, when a rear anti-roll bar was made standard equipment on all models.

US emissions regulations also reduced horsepower, and by the time of the B's demise in 1980, performance was decidedly lacklustre.

MGB GT

Infobox Automobile generation
name = MGB GT


production = 1965-1980
125282 made
body_style = 2 door coupé
engine = 1798 cc "B-Series" I4
length = 153 inches (3886 mm)
158 inches (4019 mm) rubber bumper version
width = 60 inches (1524 mm)
height = 50 inches (1238 mm)
51 inches (1295 mm) rubber bumper version

The fixed-roof MGB GT was introduced in October 1965 and production continued until 1980, although export to the US ceased in 1974. The MGB GT sported a Pininfarina-designed hatchback body. The new configuration was a 2+2 design but the new rear bench seat was very small and of limited use for adults or older children, however there was more luggage space than in the roadster. The engine and gearbox were the same as those in the roadster. In fact relatively few components differed from those used for the roadster, although the MGB GT did receive different suspension springs and anti-roll bars. The MGB GT also featured a different windscreen which was more easily and inexpensively serviceable. Early prototypes such as the MGB Berlinette produced by the Belgian coach builder Jacques Coune utilized a raised windscreen in order to accommodate the fastback.

Acceleration of the GT was slightly slower than that of the roadster due to its increased weight, though handling improved due to significantly increased chassis rigidity and perhaps slightly better weight distribution. Top speed improved by 5 mph (8 km/h) to 105 mph (170 km/h) due to better aerodynamics.

The MGB GT is seen as the first commercial success of what is now called the "hatchback" body style, seen today ranging from inexpensive three-door sedans to Aston Martin sports cars.

MGC

Infobox Automobile generation
name = MGC & MGC GT


production = 1967-1969
9,002 made
(4544 MGC, 4458 MGC GT)
body_style = 2-door roadster
2-door coupe
engine = 2912 cc C-Series I6

The MGC was a 2912 cc, straight-6 version of the MGB sold from 1967 through to 1969 with some sales running on into 1970, and given the code ADO52. It was intended as a replacement for the Austin-Healey 3000 which would have been ADO51 but this never got beyond the design proposal stage. The first engine to be considered was an Australian-designed six cylinder version of the BMC B-Series but the production versions used a 7 main bearing development of the Morris Engines designed C-Series that was also to be used for the new Austin 3-litre 4-Door saloon. In the twin SU carburettor form used in the MGC the engine produced convert|145|bhp|abbr=on at 5250 rpm.cite book |last= |title=The Motor. Road test. |year=Nov 4 1967 |publisher= |location=London |id=] The body shell needed considerable revision around the engine bay and to the floor pan, but externally the only differences were a distinctive bonnet bulge to accommodate the relocated radiator and a teardrop for carburettor clearance. It had different brakes from the MGB, 15 inch wheels, a lower geared rack and pinion and special torsion bar suspension with telescopic dampers. Like the MGB, it was available as a coupé (GT) and roadster. An overdrive gearbox or three-speed automatic gearbox were available as options. The car was capable of 120 mph (193 km/h) and a 0-60 mph time of 10.0 seconds.

The heavy engine (209 pounds heavier than the 1798 cc MGB engine) and new suspension changed the vehicle's handling, and it received a very mixed response in the automotive press. The MGC was cancelled in 1969 after less than two years of production. Today the car is considered very collectible and the main causes of the poor reputation relating to handling have in the main been overcome by better tyres and subtle modification of suspension settings.

MGB GT V8

Infobox Automobile generation
name = MGB GT V8


production = 1973-1976
2591 made
body_style = 2 door coupe
engine = 3528 cc "Rover" V8

MG began offering the MGB GT V8 in 1973 utilising the ubiquitous aluminium-block 3528 cc Rover V8 engine, first fitted to the Rover P5B. This engine had been used in the A-body platform Buick Special and Oldsmobile F-85 and was the lightest mass-production V8 in the world, with a dry weight of only Auto lb|318|0, and was about Auto lb|60|0 lighter than its 4-cylinder counterpart by the MOWOG (Morris-Wolseley Garages) foundry. Some improvements were made by MG-Rover, and the engine found a long-lived niche in the British motor industry. These cars were similar to those already being produced in significant volume by tuner Ken Costello. MG even contracted Costello to build them a prototype MGB GT V8. However, the powerful Auto bhp|180|0 engine used by Costello for his conversions was replaced for production by MG with a more modestly tuned version producing only 137 bhp(102 kW) at 5000 rpm. But Auto ftlbf|193|0 of torque helped it hit convert|60|mi/h|km/h|abbr=on in around 8 seconds, and go on to a respectable convert|125|mi/h|km/h|abbr=on top speed.

By virtue of its aluminium cylinder block and heads, the Rover V8 engine actually weighed approximately forty pounds less than MG's iron four cylinder. Unlike the MGC, the MGB GT V8's increased power and torque did not require significant chassis changes or sacrificed handling. Only GT versions of the V8-powered MGB were produced by the factory. Production ended in 1976.

MG never attempted to export the MGB GT V8 to the United States. They chose not to develop a left-hand-drive version or to seek US air pollution emission certification of the MGB GT V8, although the Rover V8 engine was offered in US-bound Rover models throughout the same period and beyond. British Leyland Motor Corporation management cited insufficient production capacity to support anticipated demand for the V8 engine in MGB GT, so they priced the MGB GT V8 high.

The MGB GT V8 was very warmly received by the automotive press, but British Leyland Motor Corporation was reportedly concerned that the MGB GT V8 would overshadow their other products, including the more expensive and less powerful Triumph Stag.

Continued public interest in high-powered MGBs is evidenced by the thousands of MGB V6 and V8 engine conversions that have been completed by do-it-yourselfers and custom shops.

RV8

Infobox Automobile generation
name = MG RV8


production = 1993-1995
2000 made
body_style = 2 seat sports/racer
engine = 3946 cc "Rover" V8

Interest in small roadsters increased in the 1990s following the introduction of the Mazda MX-5, and MG (now owned by Rover Group) capitalized on this in 1992 by producing new body panels to create an updated version of the old car. The suspension was only slightly updated, sharing the old leaf sprung rear of the MGB. The boot lid and doors were shared with the original car, as were the rear drum brakes. However, the engine was the respected aluminum Rover V8, previously used in the MGB GT V8. A limited-slip differential was also fitted.

The interior was built to luxury standards, featuring veneered burr elm woodwork and Connolly Leather. [ [http://www.mgrv8.com/presentrv8.php Presenting the MG RV8 at mgrv8.com] ]

Performance was good, with 190 bhp (142 kW) at 4,750 rpm and 0 to 60 mph (96 km/h) in 5.9 s. Largely due to the rear drum brakes and rear leaf springs (perceived to be too old fashioned for a modern performance car), the RV8 was not popular with road testers at the time. However, this did not prevent the RV8 from being a moderate sales success, and it paved the way for the introduction of the modern MGF a few years later.

It also capitalized on an interest in British products in Japan. A sizable chunk of MG RV8 production went to that country.

Racing performance

Overall or class wins

The MGB was highly successful in international road competition events such as the Monte Carlo Rally. In 1964 it won the GT category, Sebring, the Spa 1000 kilometers½ and the 1963, 1964 and 1965 Le Mans 24 hour beating more powerful cars in the process.

Gallery

References

*cite book | author=John Heilig | title=MG Sports Cars | publisher=Motorbooks | year=1996 | id=ISBN 0-7603-0112-3
*cite book | author=Ray Bonds | title=The Illustrated Directory of Sports Cars | publisher=Motorbooks | year=2003 | id=ISBN 0-7603-1420-9
*cite book | author=Anders Ditlev Clausager | title=Original MGB With MGC and MGB GT V8 | publisher=Bay View Books Ltd | year=1994 | id=ISBN 1-870979-48-6
*cite web | title=MGB Home Page | work=MG Enthusiasts | url=http://www.mgcars.org.uk/mgb.html | accessdate=March 21 | accessyear=2005
*cite web | title=MGC Home Page | work=MG Enthusiasts | url=http://www.mgcars.org.uk/mgc.html | accessdate=March 21 | accessyear=2005

ee also

Syrena Sport

External links

* [http://www.mgbclub.com MGBclub.com]
* [http://www.sportscarwarehouse.com/mgb-buying-restoring.html MGB Buyers' Guide]
* [http://rwscars.net/mg_home.htm 1963 MGB pages]
* [http://rwscars.net/gt_home.htm 1972 MGBGT pages]
* [http://www.mgcars.eu The MG MGC, Abingdon's Grand Tourer]
* [http://www.mgcars.org.uk/cgi-bin/gen5?runprog=mgoc&p=index.html MG Owners Club]
* [http://www.classic-car-magazine.co.uk/mgb/my-1969-mgbgt.html 1969 MGB GT Information and Buyers Guide]
* [http://www.speedace.info/automotive_directory/mgb.htm Information on the MGB]
* [http://www.mgb-register.org MGB-register of the M.G. Car Club]
* [http://www.britishv8.org/Photos-MG-Conversions.htm The British V8 Newsletter (and MG engine-conversion photo gallery)]
* [http://www.mg-mgb.co.uk MGB Site] History of the MGB, photo gallery, free screensaver and parts noticeboard
* [http://www.mgexperience.net The MG & MGB Experience]


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • MGB 3-10 — MGB 3–10 kkStB 49 WLB 62/64 / ČSD 323.0 Bauart: C n2 Fester Radstand: 2.945 mm Gesamtradstand: 2.945 mm Radstand mit Tender: 9.310 mm …   Deutsch Wikipedia

  • MGB Ge 4/4 — III Nummerierung: 81, 82 Anzahl: 2 Hersteller: BBC (technischer Teil) SLM (Lokomotivkasten) Bauja …   Deutsch Wikipedia

  • MGB Ge 4/4 III — Nummerierung: 81, 82 Anzahl: 2 Hersteller: BBC (technischer Teil) SLM (Lokomotivkasten) Bauja …   Deutsch Wikipedia

  • MGB Cottages — (Боракай,Филиппины) Категория отеля: 2 звездочный отель Адрес: MGB Bldg. 8, Sitio Mangg …   Каталог отелей

  • MGB — steht für: Mährische Grenzbahn Matterhorn Gotthard Bahn Medium Girder Bridge, eine NATO Schwerlastbrücke Mennonitische Geschichtsblätter, eine kirchengeschichtliche Fachzeitschrift MGB (Auto), von 1962 bis 1980 in Großbritannien hergestellter… …   Deutsch Wikipedia

  • MGB (Auto) — MG B / MGC / MGB GT V8 / MG RV8 (BMC ADO23 / ADO52 / ADO75 / ADO 76) Hersteller: BMC, British Leyland, MG Rover Group Produktionszeitraum: 1962–1980 1993 1995 Klasse: Sportwagen Karosserieversionen …   Deutsch Wikipedia

  • MGB HGe 4/4 II — HGe 4/4 II Nummerierung SBB/zb 101 961 968 SBB/FO 1951–1952, FO 101 103, 106 108 BVZ 1 5 Anzahl 8 13 Hersteller BBC, ABB …   Deutsch Wikipedia

  • MGB (automobile) — MG MGB MGB Constructeur Morris Garage Production totale 500 000 exemplaires Moteur et transmission Architecture moteur 4 cy …   Wikipédia en Français

  • Mgb (automobile) — MG MGB MGB Constructeur Morris Garage Production totale 500 000 exemplaires Moteur et transmission Architecture moteur 4 cy …   Wikipédia en Français

  • MGB Deh 4/4 II — FO Deh 4/4 II Anzahl: 6 Hersteller: SLM (mechanischer Teil, Lokomotivkasten) BBC (elektrische Ausrüstung) Baujahr(e): 1979/1984 …   Deutsch Wikipedia

  • MGB HGe 4/4 I — Baureihe HGe 4/4I Nummerierung BVZ 11–15 BVZ 16 FO 31–37 Anzahl 5 8 Hersteller SLM Winterthur, Maschinenfabrik Oerliko …   Deutsch Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.