Aluminium chloride

Aluminium chloride
Aluminium chloride
Identifiers
CAS number 7446-70-0 (anhydrous) YesY
10124-27-3 (hydrate),
7784-13-6 (hexahydrate)
PubChem 24012
ChemSpider 22445 YesY
UNII LIF1N9568Y YesY
ChEBI CHEBI:30114 YesY
RTECS number BD0530000
Jmol-3D images Image 1
Image 2
Properties
Molecular formula AlCl3
Molar mass 133.34 g/mol (anhydrous)
241.43 g/mol (hexahydrate)
Appearance white or pale yellow solid,
hygroscopic
Density 2.48 g/cm3 (anhydrous)
1.3 g/cm3 (hexahydrate)
Melting point

192.4 °C *(anhydrous)
0 °C (hexahydrate)

Boiling point

120 °C (hexahydrate)

Solubility in water 43.9 g/100 ml (0 °C)
44.9 g/100 ml (10 °C)
45.8 g/100 ml (20 °C)
46.6 g/100 ml (30 °C)
47.3 g/100 ml (40 °C)
48.1 g/100 ml (60 °C)
48.6 g/100 ml (80 °C)
49 g/100 ml (100 °C)
Solubility soluble in hydrogen chloride, ethanol, chloroform, carbon tetrachloride
slightly soluble in benzene
Structure
Crystal structure Monoclinic, mS16
Space group C12/m1, No. 12
Coordination
geometry
Octahedral (solid)
Tetrahedral (liquid)
Molecular shape Trigonal planar
(monomeric vapour)
Hazards
MSDS External MSDS
EU classification Corrosive (C)
R-phrases R34
S-phrases (S1/2), S7/8, S28, S45
LD50 anhydrous:
380 mg/kg, rat (oral)
hexahydrate:
3311 mg/kg, rat (oral)
Related compounds
Other anions Aluminium fluoride
Aluminium bromide
Aluminium iodide
Other cations Boron trichloride
Gallium trichloride
Indium(III) chloride
Magnesium chloride
Related Lewis acids Iron(III) chloride
Boron trifluoride
Supplementary data page
Structure and
properties
n, εr, etc.
Thermodynamic
data
Phase behaviour
Solid, liquid, gas
Spectral data UV, IR, NMR, MS
 YesY chloride (verify) (what is: YesY/N?)
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa)
Infobox references

Aluminium chloride (AlCl3) is the main compound of aluminium and chlorine. It is white, but samples are often contaminated with iron trichloride, giving it a yellow colour. The solid has a low melting and boiling point. It is mainly produced and consumed in the production of aluminium metal, but large amounts are also used in other areas of chemical industry. The compound is often cited as a Lewis acid. It is an example of an inorganic compound that "cracks" at mild temperature, reversibly changing from a polymer to a molecule.

Contents

Structure

AlCl3 adopts three different structures, depending on the temperature and the state (solid, liquid, gas). Solid AlCl3 is a sheet-like layered cubic close packed layers. In this framework, the Al centres exhibit octahedral coordination geometry.[1] In the melt, aluminium trichloride exists as the dimer Al2Cl6, with tetracoordinate aluminium. This change in structure is related to the lower density of the liquid phase (1.78 g/cm3) vs solid aluminium trichloride (2.48 g/cm3). Al2Cl6 dimers are also found in the vapour phase. At higher temperatures, the Al2Cl6 dimers dissociate into trigonal planar AlCl3, which is structurally analogous to BF3. The melt conducts electricity poorly,[2] unlike more ionic halides such as sodium chloride.

Reactions

Anhydrous aluminium chloride is a powerful Lewis acid, capable of forming Lewis acid-base adducts with even weak Lewis bases such as benzophenone and mesitylene.[3] It forms tetrachloroaluminate AlCl4 in the presence of chloride ions.

Aluminium chloride reacts with calcium and magnesium hydrides in tetrahydrofuran forming tetrahydroaluminates:

Reactions with water

Aluminium chloride is hygroscopic, having a very high affinity for water. It fumes in moist air and hisses when mixed with liquid water as the Cl- ions are displaced with H2O molecules in the lattice to form the hexahydrate AlCl3·6H2O (also white to yellowish in color). The anhydrous phase cannot be regained on heating as HCl is lost leaving aluminum hydroxide or alumina (aluminum oxide):

Al(H2O)6Cl3 → Al(OH)3 + 3 HCl + 3 H2O

On strong heating (~400°C), the aluminum oxide is formed from the aluminum hydroxide via:

Al(OH)3 → Al2O3 + 3 H2O

Aqueous solutions of AlCl3 are ionic and thus conduct electricity well. Such solutions are found to be acidic, indicative of partial hydrolysis of the Al3+ ion. The reactions can be described (simplified) as:

[Al(H2O)6]3+ [Al(OH)(H2O)5]2+ + H+

Aqueous solutions behave similarly to other aluminium salts containing hydrated Al3+ ions, giving a gelatinous precipitate of aluminium hydroxide upon reaction with sodium hydroxide:

AlCl3 + 3 NaOH → Al(OH)3 + 3NaCl

Synthesis

Aluminium chloride is manufactured on a large scale by the exothermic reaction of aluminium metal with chlorine or hydrogen chloride at temperatures between 650 to 750 °C.[2]

2 Al + 3 Cl2 → 2 AlCl3
2 Al + 6 HCl → 2 AlCl3 + 3 H2

In the US in 1993, approximately 21,000 tons were produced, not counting the amounts consumed in the production of aluminium.[4]

Hydrated aluminium trichloride is prepared by dissolving aluminium oxides in hydrochloric acid. Heating this solid does not produce anhydrous aluminium trichloride, the hexahydrate decomposes to aluminium oxide when heated to 300 °C:[4]

2 AlCl3 + 3 H2O → Al2O3 + 6 HCl

Aluminium also forms a lower chloride, aluminium(I) chloride (AlCl), but this is very unstable and only known in the vapor phase.[2]

Uses

Anhydrous aluminium trichloride

AlCl3 is probably the most commonly used Lewis acid and also one of the most powerful. It finds widespread application in the chemical industry as a catalyst for Friedel–Crafts reactions, both acylations and alkylations. Important products are detergents and ethylbenzene. It also finds use in polymerization and isomerization reactions of hydrocarbons.

The Friedel–Crafts reaction[3] is the major use for aluminium chloride, for example in the preparation of anthraquinone (for the dyestuffs industry) from benzene and phosgene.[2] In the general Friedel-Crafts reaction, an acyl chloride or alkyl halide reacts with an aromatic system as shown:[3]

Benzene Friedel-Crafts alkylation-diagram.svg

The alkylation reaction is more widely used than the acylation reaction, although its practice is more technically demanding because the reaction is more sluggish. For both reactions, the aluminium chloride, as well as other materials and the equipment, should be dry, although a trace of moisture is necessary for the reaction to proceed. A general problem with the Friedel-Crafts reaction is that the aluminium chloride catalyst sometimes is required in full stoichiometric quantities, because it complexes strongly with the products. This complication sometimes generates a large amount of corrosive waste. For these and similar reasons, more recyclable or environmentally benign catalysts have been sought. Thus, the use of aluminium trichloride in some applications is being displaced by zeolites.

Aluminium chloride can also be used to introduce aldehyde groups onto aromatic rings, forgggggivia the Gattermann-Koch reaction which uses carbon monoxide, hydrogen chloride and a copper(I) chloride co-catalyst.[5]

AlCl3 formylation.gif

Aluminium chloride finds a wide variety of other applications in organic chemistry.[6] For example, it can catalyse the "ene reaction", such as the addition of 3-buten-2-one (methyl vinyl ketone) to carvone:[7]

AlCl3 ene rxn.gif

AlCl3 is also widely used for polymerization and isomerization reactions of hydrocarbons. Important examples include the manufacture of ethylbenzene, which used to make styrene and thus polystyrene, and also production of dodecylbenzene, which is used for making detergents.[2]

Aluminium chloride combined with aluminium in the presence of an arene can be used to synthesize bis(arene) metal complexes, e.g. bis(benzene)chromium, from certain metal halides via the so-called Fischer-Hafner synthesis.

Hydrated aluminium chlorides

The hexahydrate has few applications, but aluminium chlorohydrate is a common component in antiperspirants at low concentrations.[4] Hyperhidrosis sufferers need a much higher concentration (12% or higher), sold under such brand names as Drysol,sunsola, Maxim, Odaban, CertainDri, B+Drier, Anhydrol Forte and Driclor.

Precautions

Anhydrous AlCl3 reacts vigorously with water and bases, so suitable precautions are required. Hydrated salts are less problematic. It can cause irritation to the eyes, skin, and the respiratory system if inhaled or on contact.[8]

References

  1. ^ In contrast, AlBr3 has a more molecular structure, with the Al3+ centers occupying adjacent tetrahedral holes of the close-packed framework of Br ions.A. F. Wells, Structural Inorganic Chemistry, Oxford Press, Oxford, United Kingdom, 1984.
  2. ^ a b c d e N. N. Greenwood, A. Earnshaw, Chemistry of the Elements, Pergamon Press, Oxford, United Kingdom, 1984.
  3. ^ a b c G. A. Olah (ed.), Friedel-Crafts and Related Reactions, Vol. 1, Interscience, New York, 1963.
  4. ^ a b c Otto Helmboldt, L. Keith Hudson, Chanakya Misra, Karl Wefers, Wolfgang Heck, Hans Stark, Max Danner, Norbert Rösch "Aluminum Compounds, Inorganic" in Ullmann's Encyclopedia of Industrial Chemistry 2007, Wiley-VCH, Weinheim.doi:10.1002/14356007.a01_527.pub2
  5. ^ L. G. Wade, Organic Chemistry, 5th edition, Prentice Hall, Upper Saddle River, New Jersey, United States, 2003.
  6. ^ P. Galatsis, in: Handbook of Reagents for Organic Synthesis: Acidic and Basic Reagents, (H. J. Reich, J. H. Rigby, eds.), pp. 12–15, Wiley, New York, 1999.
  7. ^ B. B. Snider (1980). "Lewis-acid catalyzed ene reactions". Acc. Chem. Res. 13 (11): 426. doi:10.1021/ar50155a007. 
  8. ^ http://www.solvaychemicals.us/static/wma/pdf/5/1/1/8/ALCL.pdf

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • aluminium chloride — aliuminio chloridas statusas T sritis chemija formulė AlCl₃ atitikmenys: angl. aluminium chloride; aluminium trichloride rus. алюминий треххлористый; алюминий хлористый; алюминия хлорид ryšiai: sinonimas – aliuminio trichloridas …   Chemijos terminų aiškinamasis žodynas

  • Aluminium chloride (data page) — Supplementary data for aluminium chloride. External MSDS sheets * [http://www.jtbaker.com/msds/englishhtml/a2790.htm Baker] * [https://fscimage.fishersci.com/msds/00900.htm Fisher] * [http://hazard.com/msds/f2/bkz/bkzqx.html EM Science] *… …   Wikipedia

  • aluminium chloride — noun a chloride used as a wood preservative or catalyst • Syn: ↑aluminum chloride • Hypernyms: ↑chloride …   Useful english dictionary

  • aluminium chloride — noun a) AlCl, only exists in the gas phase when AlCl is heated with aluminium. b) AlCl, the aluminium salt of hydrochloric acid; forms the covalent dimer AlCl when melted; it has very many industrial applications, including that of a catalyst in… …   Wiktionary

  • aluminium chloride hexahydrate — a powerful antiperspirant used in the treatment of conditions associated with excessive sweating (see hyperhidrosis). It is applied to the skin in the form of a solution and may cause local irritation. Trade names: Anhydrol Forte, Driclor …   Medical dictionary

  • aluminium chloride hexahydrate — a powerful antiperspirant used in the treatment of conditions associated with excessive sweating (see hyperhidrosis). It is applied to the skin in the form of a solution and may cause local irritation. Trade names: Anhydrol Forte, Driclor …   The new mediacal dictionary

  • Aluminium chlorohydrate — is a group of specific aluminium salts having the general formula AlnCl(3n m)(OH)m. It is used in deodorants and antiperspirants and as a coagulant in water purification. In water purification, this compound is preferred in some cases because of… …   Wikipedia

  • Aluminium zirconium tetrachlorohydrex gly — is a chemical compound used as an antiperspirant in many deodorant products. The compound is selected for its ability to close pores in the skin and prevent sweat production. Its anhydrous form gives it the added ability of absorbing… …   Wikipedia

  • Aluminium — Infobox aluminiumAluminium (Audio IPA|En uk aluminium1.ogg|ˌæljʊˈmɪniəm, IPA|/ˌæljəˈmɪniəm/) or aluminum (Audio IPA|En uk aluminum.ogg|/əˈluːmɪnəm/, see spelling below) is a silvery white and ductile member of the boron group of chemical elements …   Wikipedia

  • aluminium hydride — noun a) AlH, formed when aluminium is heated at 1500°C in an atmosphere of hydrogen. b) (AlH), can be prepared in ether solution by the reaction of aluminium chloride and lithium hydride; it is used to manufacture lithium aluminium hydride …   Wiktionary

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”