Toyota MZ engine

Toyota MZ engine

Infobox Automobile engine
name=Toyota MZ engine


manufacturer=Toyota Motor Corporation
production=1994–
class=V6
successor=Toyota GR engine

The Toyota MZ engine family is a V6 piston engine series. The MZ series has an aluminium engine block and aluminium alloy DOHC cylinder heads. The cylinders are lined with cast iron, and is of a closed deck design (no open space between the bores). It uses multiport fuel injection (MFI), has 4 valves per cylinder and features a one-piece cast camshaft and cast aluminium intake manifold. The MZ family is a lightweight V6 engine of an all aluminium design, using lighter weight parts than the heavier duty VZ block engines in an effort to lower production costs, decrease engine weight, and decrease reciprocating weight without sacrificing reliability. Toyota sought to enhance the drivability pattern of the engine (over the 3VZ) at exactly 3000rpm, since that was the typical RPM for motors cruising on the highway. The result was less cylinder distortion (coupled with the decreased weight of rotating assemblies), smoother operation (less NVH) at that engine speed, and increased engine efficiency.

They feature cast aluminium pistons with an anti-friction resin coating (moly) and valve depressions on motors without VVT-i. They also use steel rings, smaller diameter, shot-peened rods, and a forged steel crankshaft.

1MZ-FE

The 1MZ-FE is a 3.0 L (2994 cc) engine. Bore is 87.5 mm and stroke is 83 mm. Output is 168-190 hp @ 5200-5400 rpm with 183-193 ft·lbf of torque at 4400 rpm. Horsepower ratings dropped after the Society of Automotive Engineers implemented a new power measurement system for vehicle engines. It has bucket tappets and was designed for good fuel economy without an overall performance trade-off.

The 1MZ-FE was on Ward's 10 Best Engines list for 1996.

Applications:
* 1994–2003 Toyota Camry
* 1999–2003 Toyota Camry Solara
* 1994-2003 Lexus ES 300 & Toyota Windom (Japanese domestic market)
* 1995-2004 Toyota Avalon & 2000 Toyota Pronard (Avalon for Japanese domestic market)
* 1997 Lexus RX300 & Toyota Harrier (Japanese domestic market)
* 2000 Toyota Estima (Japanese domestic market)
* 1998-2000 Toyota Sienna

The 1MZ-FE with VVT-i is used in the Avalon, Highlander, Sienna and Camry. Output is 210 hp (156 kW) at 5800 rpm with 222 ft·lbf (328 N·m) of torque at 4400 rpm. Early versions of the VVT-i 1MZ used a dual throttle body, cast aluminum intake manifold, and EGR block off plates on the exhaust manifolds. Later versions used an ABS plastic intake manifold to further weight reduction and decrease cost. These versions may also have drive-by-wire/electronic throttle control.

Applications:
* 1997-2004 Toyota Avalon
* 2001-2003 Toyota Highlander/Kluger
* 2003-2006 Toyota Camry
* 2001-2003 Toyota Sienna
* 2002 Toyota Alphard (Japanese domestic market)
* 1999-2001 Lexus ES 300
* 1999-2001 Lexus RX300

2MZ-FE

The 2MZ-FE is a 2.5 L (2496 cc) engine replacing the 4VZ-FE as the worldwide 2.5 L V6. Bore is 87.5 mm and stroke is 69.2 mm. Output is Convert|200|hp|kW|-1|abbr=on at 6000 rpm with torque of Auto ft.lbf|180|0 at 4600 rpm.

Applications:
* Toyota Camry
* Toyota Windom (Japanese domestic market)
* Toyota Mark II Qualis (Japanese domestic market)

3MZ-FE

The 3MZ-FE is a 3.3 L (3310 cc) version . Bore is 92 mm and stroke is 83 mm. Output is Convert|225|hp|kW|0|abbr=on with Auto ft.lbf|240|0 of torque in the Camry and Convert|215|hp|kW|0|abbr=on with Auto ft.lbf|222|0 of torque in the Sienna and Highlander. It also features VVT-i, ETCS-i (Electronic Throttle Control System - intelligent/DBW), ABS plastic intake, and increased throttle body diameter over the 1MZ. The 3MZ uses a new flat-type knock sensor, which is a departure from the typical resonator type knock sensor used on the previous MZs. Those MZs had poor knock control, or perhaps oversensitivity when detecting knock, and power loss up to 20hp may be realized due to erratic ignition timing (advance, retard, ...) when using an octane lower than 91. The new flat type knock sensor is a completely different design and detects more frequencies than the traditional resonator type, and thus, provides the ECU with more accurate data. A bolt goes through the center of the knock sensor, which then mates the sensor to the block on each bank. Applications:
*2004-2006 Toyota Camry SE V6
*2004- Toyota Camry Solara
*2004-2006 Toyota Sienna
*2003-2007 Toyota Highlander
*2005- Toyota Highlander Hybrid
*2003-2006 Lexus RX 330
*2006- Lexus RX 400h
*2004-2006 Lexus ES 330
*2006- Mitsuoka Orochi

ee also

* List of Toyota engines


Wikimedia Foundation. 2010.

См. также в других словарях:

  • Toyota - получить на Академике действующий промокод Евродиски или выгодно toyota купить со скидкой на распродаже в Евродиски

  • Toyota M engine — Infobox Automobile engine name=Toyota M engine manufacturer=Toyota Motor Corporation production=1965 ndash;1993Toyota Motor Corporation s M family of engines were a longitudinally mounted straight 6 engine design. They were used from the 1960s… …   Wikipedia

  • Toyota JZ engine — Infobox Automobile engine name=Toyota JZ engine manufacturer=Toyota Motor Corporation production=1990 ndash;2005 predecessor=Toyota M engine class=inline 6The Toyota JZ engine family is a series of inline 6 automobile engines. A replacement for… …   Wikipedia

  • Toyota ZZ engine — The Toyota ZZ engine family is a straight 4 piston engine series. The ZZ series uses an aluminum engine block and aluminum DOHC 4 valve cylinder heads, a first for Toyota. The valve camshafts are chain driven. The two 1.8 L members of the family …   Wikipedia

  • Toyota VZ engine — Infobox Automobile engine name=Toyota VZ engine manufacturer=Toyota Motor Corporation production=1988 ndash; predecessor=Toyota G engine successor=Toyota MZ engine class=DOHC 60° 24 valve V6 similar=Chrysler LH V6 GM 54° V6 Mazda K engine Nissan… …   Wikipedia

  • Toyota GR engine — Infobox Automobile engine name=Toyota GR engine manufacturer=Toyota Motor Corporation production=2002 ndash; class=DOHC 60° V6 predecessor=Toyota MZ engine Toyota M engine Toyota JZ engine Toyota VZ engine Toyota G engine similar=Chrysler SOHC V6 …   Wikipedia

  • Toyota AZ engine — Infobox Automobile engine name=Toyota AZ engine manufacturer=Toyota Motor Corporation production=2000–presentThe Toyota AZ engine family is a straight 4 piston engine series. The AZ series uses an aluminium engine block with cast iron cylinder… …   Wikipedia

  • Toyota S engine — Infobox Automobile engine name=Toyota S engine manufacturer=Toyota Motor Corporation production=1982 ndash;The Toyota S Series engines are a family of straight 4 engines with displacement from 1.8 L to 2.2 L produced by Toyota Motor Corporation.… …   Wikipedia

  • Toyota E engine — The Toyota E engine family is a straight 4 piston engine series, utilizing a timing belt rather than a chain. Like many of Toyota s other engine designs, the E engine series features a cast iron block, along with an aluminum cylinder head. The… …   Wikipedia

  • Toyota T engine — The Toyota T series is a family of inline 4 automobile engines manufactured by Toyota beginning in 1970 and ending in 1985. It started as a Pushrod Overhead Valve (OHV) design and later, performance oriented Dual Overhead Cam (DOHC) variants were …   Wikipedia

  • Toyota UZ engine — Infobox Automobile engine name=Toyota UZ engine manufacturer=Toyota Motor Corporation production=1989 ndash; class=DOHC 90° V8 similar=Jaguar AJ V8 Ford Modular V8 Ford/Yamaha V8 GM Premium V Mercedes Benz M113/M155 BMW M62 BMW N62 Nissan VH… …   Wikipedia


Поделиться ссылкой на выделенное

Прямая ссылка:
Нажмите правой клавишей мыши и выберите «Копировать ссылку»