Rib (aircraft)

Rib (aircraft)
Rib
DH-60 Gipsy Moth Wing Structure.JPG
Wing ribs of a de Havilland DH.60 Moth

In an aircraft, ribs are forming elements of the structure of a wing, especially in traditional construction.

By analogy with the anatomical definition of "rib", the ribs attach to the main spar, and by being repeated at frequent intervals, form a skeletal shape for the wing. Usually ribs incorporate the airfoil shape of the wing, and the skin adopts this shape when stretched over the ribs.

Type of ribs

There are several types of ribs. Form-ribs, plate-type ribs, truss ribs, closed-ribs, forged ribs and milled ribs, where form-ribs are used for light to medium loading and milled ribs are as strong as it can get.
Form-ribs are made from a sheet of metal bent into shape, such as a U-profile. This profile is placed on the skin, just like a stringer, but then in the other direction.
Plate-type ribs consist of sheet-metal, which has upturned edges and (often has) weight-saving holes cut into it.
Truss ribs are built up out of profiles that are joined together. These joints require great attention during design and manufacture. The ribs may be light or heavy in design which make them suitable for a wide range of loads.
Closed-ribs are constructed from profiles and sheet metal and are suitable for closing off sections of the wing (e.g.: the fuel tank). Here too, particular care must be taken with the joints and this type of rib is also suitable for application in a variety of loading conditions.
Forged ribs are manufactured using heavy press-machinery. The result is fairly rough; for more refined parts, high-pressure presses are required, which are very expensive. Forged pieces (usually) have to undergo further treatment (for smoother edges and holes). Forged ribs are used for sections where very high loads apply - near the undercarriage for example.
Milled ribs are solid structures. They are manufactured by milling away excess material from a solid block of metal (usually using computer-controlled milling machines). The shape of these ribs is always accurately defined. Such ribs are used under similar conditions as those for forged ribs.

Ribs are made out of wood, metal, plastic, composites, foam. The wings of kites,[1] hang gliders,[2] paragliders,[3] powered kites,[4] powered hang gliders, ultralights, windmills [5] are aircraft that have versions that use ribs to form the wing shape.

For full size and flying model aircraft wing structures that are usually made of wood, ribs can either be in one piece (forming the airfoil at that rib's "station" in the wing), or be in a three-piece format, with the rib web being the part that the one-piece rib consisted of, with capstrips for the upper and lower edging of the rib, running from the leading edge to the trailing edge, being the other two component parts.

References


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Rib (disambiguation) — Rib or RIB may mean:In anatomy* Rib, a bone attached to the spine, in vertebrate animals * Ribs (food), the cooked meat and rib bones of a food animal * Rib or costa, the leading edge of an insect wing (See glossary of Lepidopteran terms)In… …   Wikipedia

  • Aircraft dope — 2699 a World War I Royal Aircraft Factory B.E.2 finished in a clear (non coloured) dope Aircraft dope is a plasticised lacquer that is applied to fabric covered aircraft. It tautens and stiffens fabric stretched over airframes and renders them… …   Wikipedia

  • rib — The part of an aircraft structure that gives the aerodynamic shape to the wing and support to the spars stabilizes the spars against twisting and the stringers and the skin against buckling, and passes concentrated loads into the skin and the… …   Aviation dictionary

  • Yoke (aircraft) — Aircraft Yoke The W shaped control yoke of a Boeing 737. A yoke, alternatively known as control column, is a device used for piloting in most fixed wing aircraft.[1] Contents …   Wikipedia

  • Radio-controlled aircraft — A radio controlled aircraft (often called RC aircraft or RC plane) is a model aircraft that is controlled remotely, typically with a hand held transmitter and a receiver within the craft. The receiver controls the corresponding servos that move… …   Wikipedia

  • Airframe — means the mechanical structure of an aircraft [cite book | author =Ed Rouen | title=Airplane Names | publisher=San Diego Aerospace Museum | year=2005 | url=http://www.marchfield.org/rouen01.html Names and dates of more than 2,800 aircraft models… …   Wikipedia

  • Military equipment of Cyprus — FN P90 in the hands of Cypriot National Guard during a parade in Larnaca Currently, the Cyprus National Guard is a combined arms force and represents the organised air, land and sea capabilities of the Republic of Cyprus. Equipment has in the… …   Wikipedia

  • Meal, Ready-to-Eat — MRE redirects here. For other uses, see MRE (disambiguation). Two MRE packets: beef teriyaki and meatloaf with gravy The Meal, Ready to Eat commonly known as the MRE is a self contained, individual field ration in lightweight packaging bought by… …   Wikipedia

  • Jim Bede — James R. Jim Bede is an aircraft designer, who is often credited with the creation of the modern kitplane market. He has designed well over a dozen aircraft since the 1960s, but a string of business failures have kept most of these designs out of …   Wikipedia

  • Supermarine Spitfire (early Merlin powered variants) — Infobox Aircraft name =Spitfire type =Fighter manufacturer =Supermarine caption =Spitfire Vc launching from USS Wasp designer =R. J. Mitchell first flight =5 March 1936 introduction =1938 retired =1955, RAF status = primary user =Royal Air Force… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”