Colt Paterson

Colt Paterson
Colt Paterson
Paterson.jpg
Paterson Colts Top: Texas Paterson with Loading Lever c 1839. Lower: Texas Paterson 1836 (replicas)
Type Revolver
Place of origin  United States
Service history
In service 1836- 47
Used by United States & Republic of Texas
Wars Seminole Wars
Texas-Indian Wars
Mexican-American War
Production history
Designer Samuel Colt
Samuel Hamilton Walker
Designed 1836
Manufacturer Patent Arms Company,
Paterson NJ
Produced c. 1836-1842
(assembled and sold by John Ellers after failure of Patent Arms company)
Number built c 2,800
Variants different calibers,sizes and configurations
Specifications
Weight 2 lb 12 oz (1.2 kg levered model)
Length 13.75 in (34.9 cm) (Texas Model)
Barrel length 7.5 in (19 cm)

Caliber .36 - .380-inch ball, revolver
Action single-action
Muzzle velocity c 900 ft/s (270 m/s)
Effective range 65 yd (59 m)
Feed system five-round cylinder
Sights blade front sight, hammer notch rear sight

A Colt Paterson is a revolver. It was the first commercial repeating firearm employing a revolving cylinder with multiple chambers aligned with a single, stationary barrel. Its design was patented by Samuel Colt on February 25, 1836, in the United States, France, and England, and it derived its name from being produced in Paterson, New Jersey. Initially this 5-shot revolver was produced in .28 caliber, with a .36 caliber model following a year later. As originally designed and produced, no loading lever was included with the revolver; a user had to disassemble the revolver partially to re-load it. Starting in 1839, however, a reloading lever and a capping window was incorporated into the design, allowing reloading without requiring partial disassembly of the revolver. This loading lever and capping window design change was also incorporated after the fact into most Colt Paterson revolvers that had been produced from 1836 until 1839.[1] Unlike later revolvers, a folding trigger was incorporated into the Colt Paterson. The trigger only became visible upon cocking the hammer.

A subsequent patent renewal in 1849, and aggressive litigation against infringements, gave Colt a domestic monopoly on revolver development until the middle 1850s.

Contents

Legend

Early Colt literature and later publications insist that Colt was inspired to design the revolver in 1830 by viewing the steering mechanisms aboard the brig Corvo while bound from Boston to Calcutta. However, some believe he saw examples of the Collier Flintlock Revolver while touring the Tower after the Corvo docked in London. In any event, sometime while aboard the Corvo he produced a wooden model (the model is exhibited in the Texas Ranger Hall of Fame Museum in Waco, Texas) and further developed the concept during the early 1830s.

Samuel Colt's first factory, the Patent Arms Company (Plant ruins site at: 40° 55' 01.04" N, 74° 10' 44.48" W) of Paterson, New Jersey manufactured 1,450 revolving rifles and carbines, 462 revolving shotguns and 2,350 revolving pistols between 1836 and 1842 when the business failed. A creditor and business associate, John Ehlers, continued manufacture and sale of (approximately 500 of the total 2,850) pistols through 1847.[1] Revolving pistols held five shots and varied from "pocket" to "belt" and "holster" designations based upon size and intended mode of carry. Calibers ranged from 28/100s through 36/100s-inch. The model most identified with the "Paterson Colt" designation is the Number 5 Holster or Texas Paterson (1,000 units), which was manufactured in .36 caliber.[1]

Combination tool including seating stem/lever,nipple pick, nipple wrench, screwdriver

Operation

The early Colt revolvers were of single action design meaning that the trigger functioned only to discharge the weapon. It was necessary to manually cock the hammer prior to firing. The close tolerances, folding trigger and multiplicity of small parts and springs seemed more appropriate to a fine timepiece than a tool destined for field service and fouling from black powder residue.

The first Paterson Models (1836-1838) required partial disassembly for loading and had no definitive provision for safely carrying the revolver with all chambers loaded. To load the revolver, the shooter would:

  1. Draw the hammer to half-cock to free the cylinder for removal and rotation;
  2. Push the barrel wedge from right to left until it stops against a retaining screw;
  3. Pull the barrel and then the cylinder off the central arbor;
  4. Fill the individual chambers with powder leaving enough room to seat a lead ball;
  5. Using a special lever tool or the arbor, seat balls beneath the chamber mouths.[2]
  6. Replace the cylinder, barrel, and wedge and with the hammer at half cock, place percussion caps on each tube using the Colt-designed capping tool. The revolvers came with spare cylinders and the practice of the day was to carry spare cylinders loaded and capped for fast reloading. Period users had few qualms about this practice even though it presented a real hazard of accidental discharge if the caps were struck or the cylinder dropped.[2]
Exploded diagram of the Paterson Colt revolver showing internal mechanisms with cylinder reversed
Using combination tool to seat balls

Routine carry modes included leaving the hammer in the half-cock position, lowering the hammer to rest on a capped chamber, downloading by one cylinder, or lowering the hammer between the chambers of the cylinder. The first two options were (and are) extremely dangerous. Later Colt revolvers had a notched hammer that would fit over an intermediate safety pin located between cylinders on the back of the chamber when all cylinders were loaded, thereby obviating contact of the hammer with the percussion caps until the single-action hammer was intentionally cocked.

In 1839, a hinged loading lever and capping window became standard for new revolvers and was retrofitted to the older designs. So modified, the revolvers could be loaded without disassembly. When the Paterson revolvers with loading levers finally reached Texas in 1842, Texas Ranger Captain John Coffee Hays was very pleased that his ranging companies could now reload from horseback.

Handling and Shooting Characteristics

Slow-fire off-hand group from 60 feet (18 m)

To fire the Paterson, the shooter thumbed the hammer back and the action rotated a chamber in line with the barrel and locked the cylinder in place. This also caused the folding trigger to drop down from the frame into firing position. The sight picture consists of a front blade and a notch in the tip of the hammer. This sequence is repeated for each of the five shots in the cylinder (although the safety-conscious shooter will load only four, leaving the hammer down on an empty chamber for routine handling and carry.)

Compared to the later Colt Percussion Revolver designs, the Paterson is ergonomically flawed but, even with the odd bell-shaped grip and jutting trigger, the revolver points reasonably well and delivers useful accuracy.[2] That Samuel Colt intended the revolver to be accurate is evident because of the rifled barrel and the extra long accessory barrels present in some cased sets.[1] Using modern-day Uberti replicas, the usual expectation is that careful, one-handed shooting will produce groups of 2–3 in (5.1–7.6 cm) at 60 ft (18 m).[3]

The Number 5 Belt Revolver would be an effective weapon to 50 yd (46 m) with ideal shooting conditions though, from a moving horse, the useful range would be measured in feet.

The available power is comparable to a modern .380 pistol cartridge. The .375-.380-inch round ball weighs a near-identical 83 grains (5.4 g) and the velocity is also essentially the same.

The cylinder is somewhat shorter than that found on the later Colt Navy .36 revolvers but will hold 22 gr (1.4 g) of FFFg black powder while allowing full seating of the ball.

Paterson With Loading Lever[2]
Gunpowder
Velocity
Deviation
22 grains (1.4 g) Goex Brand FFFg 879 feet per second (268 m/s) 37 ft/s (11 m/s) extreme spread
90 Year Old FFFg from cartridges 943 feet per second (287 m/s) 75 ft/s (23 m/s) extreme spread

Military Acceptance

Capt. John Coffee "Jack" Hays of the Texas Rangers

Colt sold a few of the long arms and handguns to the United States Army and they saw limited use in the Second Seminole War in Florida.[1] In general though, the United States government considered the arms to be excessively fragile and prone to malfunction. The Republic of Texas bought 180 of the revolving shotguns and rifles and a like number of handguns for the Texas Navy. The repeating handguns were very popular with the Texas Rangers, providing them with sustained fire power against their Comanche adversaries. The weapon was especially decisive in the Battle of Bandera Pass. Captains Jack Hays and Samuel Walker of the Texas Rangers became major proponents of the Colt Revolvers and were successful in advocating military contracts for later models such as the Walker Colt.

References

  1. ^ a b c d e Wilson, R. L. (1985). Colt An American Legend. Atabras. ISBN 0-89660-011-4. 
  2. ^ a b c d Bates, Johnny; Cumpston, Mike (2005). Percussion Pistols and Revolvers, History, Performance and Practical Use. iUniverse. ISBN 978-0-595-35796-3. 
  3. ^ Guns Magazine Article at Highbeam Research: Cumpston, Mike "The First Sixshooter Was a Fiveshooter, GUNS Magazine San Diego, CA, Publisher's Development Corporation 2006

External links

  • Colt Paterson Reference, Web site for past Colt Paterson guns sold at auction. Photos, descriptions and price estimates.
  • Texas Paterson Reference, Web site for past Texas Paterson guns sold at auction. Photos, descriptions and price estimates.

Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • Colt Paterson — Le modèle Paterson original, tel qu il fut conçu en 1836, avant l adjonction du levier de recharge. Le Colt Paterson fut le premier révolver, créé par Samuel Colt en 1836 d après un brevet (revolving gun patent) qu il avait déposé en 1835. Il… …   Wikipédia en Français

  • Colt 1851 Navy Revolver — Colt Navy Revolver Colt 1851 Navy Type Single Action Revolver Place of origin …   Wikipedia

  • Colt Walker — Model 1847 Type Revolver Place of origin …   Wikipedia

  • Colt Single Action Army — Colt Single Action, Werksgravur 1893 von Cuno Helfricht Der Colt Single Action Army, auch bekannt als Peacemaker, M1873, Single Action Army, SAA und Colt 45, ist der erste von der Colt’s Patent Firearms Manufacturing Company hergestellte… …   Deutsch Wikipedia

  • Paterson — steht für: Paterson (New Jersey), Stadt in den USA Paterson (Gedichtzyklus), eines Werk des William Carlos Williams Paterson (Handelskette), eine Supermarktkette in Russland Paterson (Auto), eine ehemalige Automobilfirma in den USA, 1908 1922 den …   Deutsch Wikipedia

  • Colt Dragoon Revolver — Martial Third Model Dragoon, U.S. Cavalry issued Type Revolver Place of origin …   Wikipedia

  • Colt Walker — de 1847 Le Colt Walker est un revolver simple action fabriqué par Colt en 1847. Son appellation vient du nom du capitaine Walker, officier des Texas Rangers l ayant fait adopter par l Armée américaine pour la Cavalerie engagée contre le Mexique à …   Wikipédia en Français

  • Colt-Perkussionsrevolver — Nachdem Samuel Colt 1836 sein erstes Patent für einen funktionalen Revolver erhalten hatte, begann die Produktion einer Reihe von Perkussionsrevolvern und Revolvergewehren bei der Patent Arms Manufacturing Co. in Paterson (New Jersey) für den… …   Deutsch Wikipedia

  • Paterson, New Jersey — City of Paterson   City   Nickname(s): The Silk City …   Wikipedia

  • Colt's Manufacturing Company — For other uses, see CMC (disambiguation). Colt s Manufacturing Company Type Private Industry Defense Founded 1836 …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”