Liming (leather processing)

Liming (leather processing)

The liming operation in leather, is a drum/paddle or pit based operation where four main objectives are met. The obectives are [citation
title = Leather Technician's Handbook
first = J.H. | last = Sharphouse
page = 104
publisher = Leather Producer's Association
isbn = 0950228516
] :

* Removal of interfibrillary proteins .
* Removal of Keratin proteins.
* Collagen swelling due to the alkaline pH.
* Collagen fibre bundle splitting.

Liming operations of cattle hides usually last 18 hours and are generally associated with the alkaline phase of beamhouse operations. Historically, the liming pits were used and were one the longest operations.

Removal of Interfibrillary Proteins

* The interfibrillary proteins are denatured by the presence of alkali (particularly sodium sulfide), rendered soluble, facilitating their removal from the leather. Removal is done by the mechanical action of liming or reliming, but more prominently when the pelt is deswelled (during deliming). Failure to remove these proteins results in a hard, tinny leather (due to fibre glueing upon drying) that is brittle and inflexible.

Keratin Removal

* Keratin that is present in the hair, scales and in the epidermis of the skin is hydrolysed in the presence of alkali (at pH values greater than 11.5). The disulfide bridges found in keratin protein is cleaved but can reform. Long periods of liming will result in hair removal. The main removal of keratin is performed using the unhairing operation. In traditional processing liming/unhairing was indivisible and took place at the same time. Modern liming methods, and in particular, the processing of sheepskins the hair is removed first and then limed in a liming drum. In hair-save technology, the hides are unhaired first and then limed for a further 12-18 hours.

Alkaline Collagen Swelling

* The presence of calcium hydroxide results in the alkaline swelling of skin. The result is the influx of water into the hide/skin and a marked increase in fibre diameter and fibre shortening. The thickness of the skin increases, but the surface area of the pelt decreases. The weight increase, due to the uptake of water results in a doubling of the hide/skin weight. But, this weight also needs to take into consideration that proteins (especially the hair) have been removed and the fleshing operation is often performed after liming.

Collagen Fibre Bundle Splitting

* The action of liming, in particular the swelling of the skin results in the splitting of the fibre bundle sheath. Due to the fibre diameter increasing, the bundle sheath cannot contain the thicker fibres and it bursts open. This allows increased access to the fibres which allows better tanning, retanning, dyeing and fatliquoring.

References


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • Liming — may refer to:* Liming (soil), a soil treatment method * Liming (leather processing), preparation of hides before tanning * The use of birdlime as a sticky bird trap …   Wikipedia

  • Oiling (leather processing) — Oiling is a process whereby leather is hand coated (usually by brush or tampon) with either a raw (un emulsified) oil or a combination of raw oil, blended with emulsified oils and a penetrating aid. Hand oils can include fragrant oils that help… …   Wikipedia

  • Leather — For other uses, see Leather (disambiguation). Modern leather working tools Leather is a durable and flexible material created via the tanning of putrescible animal rawhide and skin, primarily cattlehide. It can be produced through different… …   Wikipedia

  • leather — /ledh euhr/, n. 1. the skin of an animal, with the hair removed, prepared for use by tanning or a similar process designed to preserve it against decay and make it pliable or supple when dry. 2. an article made of this material. 3. See stirrup… …   Universalium

  • Leather production processes — The leather manufacturing process is divided into 3 fundamental sub processes: preparatory stages, tanning and crusting. All true leathers will undergo these sub processes. A further sub process, surface coating can be added into the leather… …   Wikipedia

  • Ostrich leather — is the result of tanning skins taken from African ostriches farmed for their feathers, skin and meat. The leather is distinctive for its pattern of bumps or vacant quill follicles, ranged across a smooth field in varying densities. It requires an …   Wikipedia

  • Deliming — The deliming operation in leather processing is a drum/paddle or pit based operation where two main objectives are met:[1] Removal of alkali from the pelt and the consequent deswelling of the fibres. Lowering of the liquor pH to the values used… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”