Metal bellows


Metal bellows

Metal bellows are elastic vessels that can be compressed when pressure is applied to the outside of the vessel, or extended under vacuum. When the pressure or vacuum is released, the bellows will return to its original shape (provided the material has not been stressed past its yield strength).

Bellows technology of the 20th and 21st century is centered on metal bellows. These high-technology products bear little resemblance to the original leather bellows used traditionally in fireplaces and forges.

Contents

Types

Metal bellows

There are two main types of metal bellows - formed and welded. Formed bellows are produced by a variety of processes, including cold forming (rolling), electroforming and hydroforming. They are also called convoluted bellows or sylphons.

Welded bellows (also called edge-welded, or diaphragm bellows) are manufactured by welding a number of individually formed diaphragms to each other. The comparison between the two bellows types generally centers around cost and performance. Hydroformed bellows generally have a high tooling cost, but, when mass-produced, may have a lower piece price. However, hydroformed bellows have lower performance characteristics due to relatively thick walls and high stiffness. Welded metal bellows are produced with a lower initial tooling cost and maintain higher performance characteristics. The drawback of welded bellows is the reduced metal strength at weld joints, caused by the high temperature of welding. Electroformed bellows can be produced with modest tooling costs and with thin walls (25 micrometres or less), providing them with high sensitivity and precision in many exacting applications.[1]

Another area of comparison is in metals of construction. Hydroformed and rolled bellows are limited to metals with high plastic elongation characteristics, whereas welded bellows may be fabricated from a wider variety of standard and exotic alloys, such as stainless steel and titanium, as well as other high-strength, corrosion-resistant materials. Electroformed bellows can be produced of nickel, its high-strength alloys, and copper.

Manufacture

Welded bellows can be fabricated from a variety of exotic metals and alloys, whereas formed bellows are limited to alloys with good elongation – brass being a prime example. Welded bellows are not fabricated from brass because of its fundamentally poor weldability. Other advantages to welded bellows include compactness (higher performance in a smaller package), ability to be compressed to solid height with no damage, resistance to nicks and dents, and dramatically greater flexibility.

The welding of metal bellows is a microscopic welding process, typically performed under laboratory conditions at high magnification.

Hydroformed bellows are produced by forcing a metal tube to expand under hydraulic pressure inside a bellows-shaped mold, and assume the convoluted shape of the mold.

Electroformed bellows are produced by plating metal onto a bellows-shaped model (mandrel), and the subsequent mandrel removal by chemical or physical means.

Applications

Bellows, welded or convoluted (formed) are used in a large number of industrial applications. Below you will find a few;

Load cells; A load cell deforms if a certain load in the form of a pressure or a strain is imposed on it. This deformation is then detected by a strain gauge through which a low voltage direct current is flowing. The change in voltage is detected and made visible on a control panel. A bellows is mounted over the gauge to protect it from outside influences.

Vacuum interrupters; For the switching of very high voltages in transformer stations sparks should be avoided. To prevent any danger that the surrounding atmosphere will explode, oxygen has to be removed in the area where the sparks occur. This can be done by sealing the spark area completely. Bellows are used to seal such confined volumes and the inside of the bellows is evacuated or filled with an inert gas.

Mechanical Seals; These are mostly used to close the inside of a pump from the outside world to prevent leakage. For that purpose, a mechanical seal is mounted on the pump shaft. As the pump shaft is turning, there has to a rotating sealing element consisting of a stationary and a rotating ring. To enforce sufficient pressure on the two rings one is fitted with a spring. This spring can also have the form of a diaphragm (welded) bellow.

Pressure gauges: If the pressure of aggressive fluids or gases has to be measured, the gauge has to be isolated from the flow. For critical applications a diaphragm sealing is used instead of a bourdon tube in the gauge. This gives more security that the aggressive media will not leak. The diaphragm is a self contained sensor, transmitting the displacement to the measuring device.

Sensors: In this application diaphragm or convoluted bellows are completely sealed and filled with a certain gas. Two electrical poles are penetrating the inside of the bellows. By varying the current of those two poles the temperature inside the bellows can be regulated. The expansion or contraction of the bellows is used as an actuator to control a certain movement.

Valve Sealing: A bellows is used between the housing and the rising stem to seal the inside completely from the outside world. In Europe this is of particular importance as regulations such as TA Luft prohibit any leakage.

Couplings for stepper motors and servomotors: The flexible part, capable of compensating for misalignment is made by a bellows. It ensures that there is no angular positioning difference between the two coupling halves. This is essential if the positioning accuracy should be extremely precise.

Exhaust Bellows: Running engines cause self vibration. To compensate for those movements and temperature differences resulting in thermal expansion, bellows are used to connect the exhaust gas pipes to the funnel.

Piping expansion joint: In this application, bellows are formed in series to absorb thermal movement and vibration in piping systems that transport high temperature media such as exhaust gases or steam. (1)

Metal bellows are also used in other products and market segments, including medical applications like implantable drug pumps, to industrial actuators, to aerospace applications such as altitude sensors and fluid management devices (accumulators, surge arresters, volume compensators, and fluid storage). Metal bellows are also found in space applications, providing reservoirs with potable water as well as accumulators to collect wastewater.

References

See also


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Bellows — For other uses, see Bellows (disambiguation). Diagram of a fireplace hand bellows. A bellows is a device for delivering pressurized air in a controlled quantity to a controlled location. Basically, a bellows is a deformable container which has an …   Wikipedia

  • Bellows (disambiguation) — A bellows is a device for delivering pressurized air in a controlled quantity to a controlled location.Bellows may also refer to: * Bellows (photography) * Metal bellows * Bellows Air Force Station * Expansion joints See also * George Bellows *… …   Wikipedia

  • bellows — Devices used for measuring pressure. They are circular corrugated metal capsules, which are either evacuated or filled with an inert gas. As the pressure changes, the bellows either contract or expand, and this expansion/contraction is converted… …   Aviation dictionary

  • Bellows —    Occurs only in Jer. 6:29, in relation to the casting of metal. Probably they consisted of leather bags similar to those common in Egypt …   Easton's Bible Dictionary

  • Double Acting Piston Bellows — are a type of bellows, used by blacksmiths and smelters, with the property that air is blown out on both strokes of the handle (in contrast to more common bellows that blow air when the stroke is in one direction and refill the bellow in the… …   Wikipedia

  • Expansion joint — For the railway specific expansion joints, see Breather switch. Expansion joint on a bridge An expansion joint or movement joint is an assembly designed to safely absorb the heat induced expansion and contraction of various construction materials …   Wikipedia

  • Hydraulic accumulator — A hydraulic accumulator is an energy storage device. It is a pressure storage reservoir in which a non compressible hydraulic fluid is held under pressure by an external source. That external source can be a spring, a raised weight, or a… …   Wikipedia

  • Sylphon — A sylphon is an old name for a cylindrical symmetry bellows. When made of metal, the sylphon shape was formerly created by metal spinning inside of a metal mold, and now by hydrostatic forming within a mold. Because the mold contains the pleats… …   Wikipedia

  • Pneumatic valve springs — are metal bellows filled with compressed airCitation last = Scarborough first = Craig author link = last2 = first2 = author2 link = title = F1 Engines Valve technology date = year = url = http://scarbsf1.com/valves.html accessdate = 2007 03 05 ]… …   Wikipedia

  • Brass — For other uses, see Brass (disambiguation). Brass die, along with zinc and copper samples. Brass is an alloy of copper and zinc; the proportions of zinc and copper can be varied to create a range of brasses with varying properties.[1] In …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.