Organic semiconductor

Organic semiconductor
STM image of self-assembled supramolecular chains of the organic semiconductor Quinacridone on Graphite.

An organic semiconductor is an organic material with semiconductor properties. Single molecules, short chain (oligomers) and organic polymers can be semiconductive. Semiconducting small molecules (aromatic hydrocarbons) include the polycyclic aromatic compounds pentacene, anthracene, and rubrene. Polymeric organic semiconductors include poly(3-hexylthiophene), poly(p-phenylene vinylene), as well as polyacetylene and its derivatives.

There are two major overlapping classes of organic semiconductors. These are organic charge-transfer complexes and various linear-backbone conductive polymers derived from polyacetylene. Linear backbone organic semiconductors include polyacetylene itself and its derivatives polypyrrole, and polyaniline. At least locally, charge-transfer complexes often exhibit similar conduction mechanisms to inorganic semiconductors. Such mechanisms arise from the presence of hole and electron conduction layers separated by a band gap. As with inorganic amorphous semiconductors, tunnelling, localized states, mobility gaps, and phonon-assisted hopping also contribute to conduction, particularly in polyacetylenes. Like inorganic semiconductors, organic semiconductors can be doped. Organic semiconductors susceptible to doping such as polyaniline (Ormecon) and PEDOT:PSS are also known as organic metals.

Typical current carriers in organic semiconductors are holes and electrons in π-bonds. Almost all organic solids are insulators. But when their constituent molecules have π-conjugate systems, electrons can move via π-electron cloud overlaps, especially by hopping, tunnelling and related mechanisms. Polycyclic aromatic hydrocarbons and phthalocyanine salt crystals are examples of this type of organic semiconductor.

Mainly due to low mobility, even unpaired electrons may be stable in charge-transfer complexes. Such unpaired electrons can function as current carriers. This type of semiconductor is also obtained by pairing an electron donor molecule with an electron acceptor molecule.



Voltage-controlled switch, an "active" organic polymer electronic device from 1974. Now in the Smithsonian Chip collection.[1]

In 1862, Henry Letheby obtained a partly conductive material by anodic oxidation of aniline in sulfuric acid. The material was probably polyaniline.[2] In the 1950s, researchers discovered that polycyclic aromatic compounds formed semi-conducting charge-transfer complex salts with halogens. In particular, high conductivity of 0.12 S/cm was reported in perylene-iodine complex in 1954.[3] This finding indicated that organic compounds could carry current. In 1972, researchers found metallic conductivity in the charge-transfer complex TTF-TCNQ. Superconductivity in charge-transfer complexes was first reported in the Bechgaard salt (TMTSF)2PF6 in 1980.[4]

Similar conductivity values in linear backbone polymers (in an iodine-"doped" and oxidized polypyrrole black) were reported in 1963.[5] The 1964 monograph Organic Semiconductors[6] cites multiple reports of similar high-conductivity oxidized polyacetylenes.

In 1974 John McGinness and coworkers reported a working organic polymer electronic device .[7] These investigators reported a high conductivity "ON" state and hallmark negative differential resistance in melanin, an oxidized copolymer of polyacetylene, polypyrrole, and polyaniline. Melanin is a semiconducting polymer currently of high interest to researchers in the field of organic electronics in both its natural and synthesized forms. This device was a "proof of concept" for their earlier paper in 1972,[8] outlining what is now the classic mechanism for electrical conduction in such materials. In a typical "active" device, a voltage or current controls electron flow. This device is now in the Smithsonian's collection (see figure).

In 1977, Shirakawa et al. reported high conductivity in oxidized and iodine-doped polyacetylene.[9] They received the 2000 Nobel prize in Chemistry for "The discovery and development of conductive polymers".[10] Because of the many previous reports of similar compounds, the "discovery" assignment is contested.[11][12] Similarly, highly-conductive polypyrrole was rediscovered in 1979.[13]

Rigid-backbone organic semiconductors are now-used as active elements in optoelectronic devices such as organic light-emitting diodes (OLED), organic solar cells, organic field-effect transistors (OFET), electrochemical transistors and recently in biosensing applications. Organic semiconductors have many advantages, such as easy fabrication, mechanical flexibility, and low cost.


There are significant differences between the processing of small molecule organic semiconductors and semiconducting polymers. Thin films of soluble conjugated polymers can be prepared by solution processing methods. On the other hand, small molecules are quite often insoluble and typically require deposition via vacuum sublimation. Both approaches yield amorphous or polycrystalline films with variable degree of disorder. “Wet” coating techniques require polymers to be dissolved in a volatile solvent, filtered and deposited onto a substrate. Common examples of solvent-based coating techniques include drop casting, spin-coating, doctor-blading, inkjet printing and screen printing.[14] Spin-coating is a widely used technique for small area thin film production. It may result in a high material loss. The doctor-blade technique has a minimal material loss and was primarily developed for large area thin film production. Vacuum based thermal deposition of small molecules requires evaporation of molecules from a hot source. The molecules are then transported through vacuum onto a substrate. Condensation of these molecules on the substrate surface results in thin film formation. Wet coating techniques can be applied to small molecules but to a lesser extent depending on material solubility.


Organic semiconductors differ from inorganic counterparts in many ways. These include optical, electronic, chemical and structural properties. In order to design and model the organic semiconductors, such optical properties as absorption and photoluminescence need to be characterized.[15][16] Optical characterization for this class of materials can be done using UV-visible absorption spectrophotometers and photoluminescence spectrometers. Semiconductor film appearance and morphology can be studied with atomic force microscopy (AFM) and scanning electron microscopy (SEM). Electronic properties such as ionisation potential can be characterized by probing the electronic band structure with ultraviolet photoelectron spectroscopy (UPS).[17]

The charge-carrier transport properties of organic semiconductors are examined by a number of techniques. For example, time-of-flight (TOF) and space charge limited current techniques are used to characterize “bulk” conduction properties of organic films. Organic field effect transistor (OFET) characterization technique is probing “interfacial” properties of semiconductor films and allows to study the charge carrier mobility, transistor threshold voltage and other FET parameters. OFETs development can directly lead to novel device applications such as organic-based flexible circuits, printable radio frequency identification tags (RFID) and active matrix backplanes for displays.[15][18] Chemical composition and structure of organic semiconductors can be characterized by infrared spectroscopy, secondary ion mass spectrometry (SIMS) and X-ray photoelectron spectroscopy (XPS).

Charge transport in disordered organic semiconductors

Charge transport in organic semiconductors is dependent on π-bonding orbitals and quantum mechanical wave-function overlap. In disordered organic semiconductors, there is limited π-bonding overlapping between molecules and conduction of charge carriers (electrons or holes) is described by quantum mechanical tunnelling.[19] Charge transport depends on the ability of the charge carriers to pass from one molecule to another. Because of the quantum mechanical tunnelling nature of the charge transport, and its subsequent dependence on a probability function, this transport process is commonly referred to as hopping transport.[20] Hopping of charge carriers from molecule to molecule depends upon the energy gap between HOMO and LUMO levels. Carrier mobility is reliant upon the abundance of similar energy levels for the electrons or holes to move to and hence will experience regions of faster and slower hopping. This can be affected by both the temperature and the electric field across the system.

A theoretical study[21] has shown that in a low electric field the conductivity of organic semiconductor is proportional to T–1/4 and in a high electric field is proportional to e–(E/aT) , where a is a constant of the material. Another study shows that the AC conductivity of the organic semiconductor pentacene is frequency-dependent and provided evidence that this behavior is due to its polycrystalline structure and hopping conduction.[22]

See also


  1. ^ #2003.0029 at Smithonian collection
  2. ^ The Nobel Prize in Chemistry, 2000: Conductive polymers,
  3. ^ Herbert Naarmann “Polymers, Electrically Conducting” in Ullmann's Encyclopedia of Industrial Chemistry 2002 Wiley-VCH, Weinheim. doi:10.1002/14356007.a21_429
  4. ^ Jérome, D.; Mazaud, A.; Ribault, M.; Bechgaard, K. (1980). "Superconductivity in a synthetic organic conductor (TMTSF)2PF 6". Journal de Physique Lettres 41 (4): 95. doi:10.1051/jphyslet:0198000410409500. 
  5. ^ "Electronic Conduction in Polymers - Historic Papers". Bolto, BA; McNeill, R; Weiss, DE (1963). "Electronic Conduction in Polymers. III. Electronic Properties of Polypyrrole". Australian Journal of Chemistry 16 (6): 1090. doi:10.1071/CH9631090. McNeill, R; Weiss, DE; Willis, D (1965). "Electronic conduction in polymers. IV. Polymers from imidazole and pyridine". Australian Journal of Chemistry 18 (4): 477. doi:10.1071/CH9650477. Bolto, BA; Weiss, DE; Willis, D (1965). "Electronic conduction in polymers. V. Aromatic semiconducting polymers". Australian Journal of Chemistry 18 (4): 487. doi:10.1071/CH9650487. 
  6. ^ Organic Semiconductors by Yoshikuko Okamoto and Walter Brenner, Reinhold (1964). Chapt.7, Polymers, pp125-158
  7. ^ McGinness, J.; Corry, P.; Proctor, P. (1974-03-01). "Amorphous Semiconductor Switching in Melanins". Science 183 (4127): 853–855. doi:10.1126/science.183.4127.853. PMID 4359339. 
  8. ^ McGinness, John E. (1972-09-08). "Mobility Gaps: A Mechanism for Band Gaps in Melanins". Science 177 (4052): 896–897. doi:10.1126/science.177.4052.896. PMID 5054646. 
  9. ^ Shirakawa, Hideki; Louis, Edwin J.; MacDiarmid, Alan G.; Chiang, Chwan K.; Heeger, Alan J. (1977). "Synthesis of electrically conducting organic polymers: halogen derivatives of polyacetylene, (CH) x". Journal of the Chemical Society, Chemical Communications (16): 578. doi:10.1039/C39770000578. 
  10. ^ "Chemistry 2000". Retrieved 2010-03-20. 
  11. ^ An overview of the First Half-Century of Molecular Electronics" by Noel S. Hush, Ann. N.Y. Acad. Sci. 1006: 1–20 (2003).
  12. ^ Historical Background (or there is nothing new under the Sun), Inzelt,G. "Conducting Polymers", (2008), chapter 8, pp.265-269.
  13. ^ Diaz, A. F.; Kanazawa, K. Keiji; Gardini, Gian Piero (1979). "Electrochemical polymerization of pyrrole". Journal of the Chemical Society, Chemical Communications (14): 635. doi:10.1039/C39790000635. 
  14. ^ Sirringhaus, H.; Sele, C. W.; von Werne, Timothy; Ramsdale, C. (2007). "Manufacturing of Organic Transistor Circuits by Solution-based printing". In Hadziioannou, Georges; Malliaras, George G.. Semiconducting polymers: Chemistry, Physics and Engineering. 2 (2nd ed.). Wiley-VCH. pp. 667–694. ISBN 9783527312719. 
  15. ^ a b Brütting, Wolfgang (2005). Physics of organic semiconductors. Wiley-VCH. ISBN 9783527405503. 
  16. ^ Masenelli, B.; S. Callard, A. Gagnaire, J. Joseph (2000). "Fabrication and characterization of organic semiconductor-based microcavities". Thin Solid Films 364 (1-2): 264–268. doi:10.1016/S0040-6090(99)00944-X. 
  17. ^ Salaneck, W. R.; Antoine Kahn (2002). Conjugated polymer and molecular interfaces. CRC Press. ISBN 9780824705886. 
  18. ^ Dost, René; Das, Arindam; Grell, Martin (2007). "A novel characterization scheme for organic field-effect transistors". Journal of Physics D: Applied Physics 40 (12): 3563–3566. doi:10.1088/0022-3727/40/12/003. 
  19. ^ Nabok, Alexei (2005-03). Organic And Inorganic Nanostructures (2 ed.). Artech House Publishers. ISBN 1580538185. 
  20. ^ Hirsch, J. (1979). "Hopping transport in disordered aromatic solids: a re-interpretation of mobility measurements on PKV and TNF". Journal of Physics C: Solid State Physics 12 (2): 321. doi:10.1088/0022-3719/12/2/020. 
  21. ^ Li, L.; Meller, G.; Kosina, H. (2007). "Temperature and field-dependence of hopping conduction in organic semiconductors". Microelectronics Journal 38 (1): 47–51. doi:10.1016/j.mejo.2006.09.022. 
  22. ^ Lenski, Daniel R.; Adrian Southard, Michael S. Fuhrer (2009). "Frequency-dependent complex conductivity of an organic thin-film transistor". Applied Physics Letters 94 (23): 232103–3. arXiv:0902.4721. doi:10.1063/1.3153159. 

Further reading

  • An Overview of the First Half-Century of Molecular Electronics by Noel S. Hush, Ann. N.Y. Acad. Sci. 1006: 1–20 (2003).
  • Organic Semiconductors by Yoshikuko Okamoto and Walter Brenner, Reinhold (1964). Chapt.7, Polymers-- multiple reports of oxidized polyacetylenes with conductivities less-than 1 ohm/cm.
  • Electronic Processes in Organic Crystals and Polymers, 2 ed. by Martin Pope and Charles E. Swenberg, Oxford University Press (1999), ISBN 0195129636
  • Handbook of Organic Electronics and Photonics (3-Volume Set) by Hari Singh Nalwa, American Scientific Publishers. (2008), ISBN 1-58883-095-0
  • Semi-Conducting Polymers and Optoelectronics - Richard Friend, Cavendish Professor, Cambridge Freeview video by the Vega Science Trust.

Wikimedia Foundation. 2010.

Look at other dictionaries:

  • organic semiconductor — organinis puslaidininkis statusas T sritis Standartizacija ir metrologija apibrėžtis Kieta organinė medžiaga, apibūdinama elektroniniu arba skyliniu laidumu ir teigiamu temperatūriniu elektrinio laidžio koeficientu. atitikmenys: angl. organic… …   Penkiakalbis aiškinamasis metrologijos terminų žodynas

  • organic semiconductor — organinis puslaidininkis statusas T sritis chemija apibrėžtis Kieta organinė medžiaga, pasižyminti elektroniniu arba skyliniu laidumu bei teigiamu temperatūriniu elektrinio laidžio koeficientu. atitikmenys: angl. organic semiconductor rus.… …   Chemijos terminų aiškinamasis žodynas

  • organic semiconductor — organinis puslaidininkis statusas T sritis fizika atitikmenys: angl. organic semiconductor vok. organischer Halbleiter, m rus. органический полупроводник, m pranc. semi conducteur organique, m …   Fizikos terminų žodynas

  • Organic — may refer to: Of or relating to an organism, a living entity Of or relating to an organ Contents 1 Chemistry 2 Computing …   Wikipedia

  • Organic field-effect transistor — OFET based flexible display An organic field effect transistor (OFET) is a field effect transistor using an organic semiconductor in its channel. OFETs can be prepared either by vacuum evaporation of small molecules, by solution casting of… …   Wikipedia

  • Organic electronics — Melanin voltage controlled switch, an active organic polymer electronic device from 1974. In Smithsonian collection[1] Organic electronics, plastic electronics or polymer electronics, is a branch of electronics dealing with conductive polymers,… …   Wikipedia

  • Organic light-emitting diode — Demonstration of a flexible OLED device A green emitting OLED device An …   Wikipedia

  • Organic solar cell — An organic photovoltaic cell (OPVC) is a photovoltaic cell that uses organic electronics a branch of electronics that deals with conductive organic polymers or small organic molecules[1] for light absorption and charge transport. The plastic… …   Wikipedia

  • Semiconductor orgánico — Un semiconductor orgánico es un compuesto orgánico bajo la forma de un cristal o un polímero, que muestra propiedades similares a las de los semiconductores inorgánicos. Estas propiedades son la conducción por los electrones y los huecos, y la… …   Wikipedia Español

  • List of semiconductor materials — Semiconductor materials are insulators at absolute zero temperature that conduct electricity in a limited way at room temperature (see also Semiconductor). The defining property of a semiconductor material is that it can be doped with impurities… …   Wikipedia