Grease duct

Grease duct

A grease duct is a purpose-designed duct that is used to vent grease-laden vapours from commercial cooking equipment such as a stove, "double-decker" pizza oven, deep fryer or wok to the outside of a building or mobile food preparation trailer. Grease ducts are regulated both in terms of their construction and maintenance, forming part of the building's passive fire protection system. Even the cleaning schedule is typically dictated by the fire code and evidence of compliance must be kept on file by the owner.

pecial hazard

The grease laden vapors are hot, to begin with. As the vapours cool down, the grease settles on colder items. It is thus important for occupational safety and health as well as compliance with local fire codes to vent such vapours outside the kitchen and outside the building where the kitchen is located.

Grease, of course, is not only slippery, but also highly flammable. In fact, it qualifies as a hydrocarbon due to its inherent chemistry. Regardless of what state it is in, vapour, liquid or solid, it ignites easily and burns very rapidly, necessitating special provisions to accomplish a fire-resistance rating based on an internal grease fire as well as an external fire. Special provisions also include the necessity for proof that any adjacent firestop must be compatible with the grease duct system.

Requirements

In North America, grease ducts must be in compliance with NFPA 96 as well as the local building codes and fire codes. Cleaning takes place typically every 3 months, 6 months or annually, depending on the nature of the appliances below the hood. For instance, woks require quarterly grease duct cleaning, whereas normal stoves may necessitate the grease duct to be cleaned only every 6 months. Compliance must be proven through certificates issued by the cleaning and maintenance contractors. Purpose-designed fire suppression systems inside the hoods must also be routinely maintained. Proper cleaning must be enabled through the use of approved, fire-resistant access panels. Grease ducts should be kept as short as possible to minimise grease build-up.

ystems

A proprietary duct system that has its own inherent fire-resistance rating can be used, or a metallic duct, typically from 16 gauge sheet metal, all welded, per local codes, which is then externally treated with fireproofing. Typical materials used for fireproofing are:

* ceramic fibres
* rockwool
* calcium silicate
* vermiculite boards pressed and bonded with sodium silicate
* intumescents
* endothermic materials, sometimes on their own, sometimes in combination with ceramic fibre

Trade jurisdiction

In North American unionised construction sites, metallic ducts are typically installed by the sheet metal trade, whereas external wraps are usually installed by the insulators. Inherently fire-resistant systems are likewise installed by the sheet metal trade.

ee also

*Passive fire protection
*Duct (HVAC)
*Pressurisation ductwork
*Smoke exhaust ductwork
*Circuit integrity
*Kitchen exhaust cleaning

External links

* [http://www.ul.com/fire/wrapping.html UL treatise on wrapping systems]
* [http://www.nfpa.org/aboutthecodes/AboutTheCodes.asp?DocNum=96 NFPA 96: Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations]


Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • Passive fire protection — (PFP) is an integral component of the three components of structural fire protection and fire safety in a building. PFP attempts to contain fires or slow the spread, through use of fire resistant walls, floors, and doors (amongst other examples) …   Wikipedia

  • Smoke exhaust ductwork — is typically protected via passive fire protection means, subject to fire testing and listing and approval use and compliance. It is used to remove smoke from buildings, ships or offshore structures to enable emergency evacuation as well as… …   Wikipedia

  • Pressurisation ductwork — is a fire protection system. It is used to supply a steady stream of fresh air to any area of refuge or designated emergency evacuation or egress route.Purpose* To ensure a positive pressure environment of clean outside air, free from smoke to… …   Wikipedia

  • Fireproofing — Fireproof redirects here. For the album, see Fireproof (album). For the 2008 film, see Fireproof (2008 film). Fireproofing, a passive fire protection measure, refers to the act of making materials or structures more resistant to fire, or to those …   Wikipedia

  • Fire test — A fire test is a means of determining whether or not fire protection products meet minimum performance criteria as set out in a building code or other applicable legislation. Successful tests in laboratories holding national accreditation for… …   Wikipedia

  • Gerald W. Brown — is an American whistleblower, who concerned himself with deficiencies in passive fire protection systems in US and Canadian nuclear power plants.Thermo Lag scandalGerald W. Brown was the original whistleblower of the Thermo Lag 330 1 scandal [… …   Wikipedia

  • Heat and smoke vent — Heat and Smoke Vents are installed in buildings as an active fire protection measure. They are openings in the roof which are intended to vent the heat and smoke developed by a fire inside the building by the action of buoyancy, such that they… …   Wikipedia

  • MythBusters (2009 season) — Country of origin Australia United States No. of episodes 23 (includes 3 specials) Broadcast Original channel …   Wikipedia

  • Kitchen exhaust cleaning — (often referred to as hood cleaning ) is the process of removing grease that has formed on the walls of ducts, hoods, fans and vents in restaurant kitchen exhaust systems. Process Several processes are used to clean kitchen exhaust systems. The… …   Wikipedia

  • Extractor hood — An extractor hood (U.K.) or range hood (U.S.), also known as a kitchen hood, stove hood, exhaust hood, cooker hood, extraction hood, cooking canopy, ventilation hood, extractor fan or electric chimney, is a device containing a fan that hangs… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”