Cross-link


Cross-link
Vulcanization is an example of cross-linking.

Cross-links are bonds that link one polymer chain to another. They can be covalent bonds or ionic bonds. "Polymer chains" can refer to synthetic polymers or natural polymers (such as proteins). When the term "cross-linking" is used in the synthetic polymer science field, it usually refers to the use of cross-links to promote a difference in the polymers' physical properties. When "crosslinking" is used in the biological milieu, it refers to the use of a probe to link proteins together to check for protein–protein interactions, as well as other creative cross-linking methodologies.

Cross-linking is used in both synthetic polymer chemistry and in the biological sciences. Although the term is used to refer to the "linking of polymer chains" for both sciences, the extent of crosslinking and specificities of the crosslinking agents vary. Of course, with all science, there are overlaps, and the following delineations are a starting point to understanding the subtleties.

Contents

Cross-links in synthetic polymer chemistry

When polymer chains are linked together by cross-links, they lose some of their ability to move as individual polymer chains. For example, a liquid polymer (where the chains are freely flowing) can be turned into a "solid" or "gel" by cross-linking the chains together.

In polymer chemistry, when a synthetic polymer is said to be "cross-linked", it usually means that the entire bulk of the polymer has been exposed to the cross-linking method. The resulting modification of mechanical properties depends strongly on the cross-link density. Low cross-link densities decrease the viscosities of polymer melts. Intermediate cross-link densities transform gummy polymers into materials that have elastomeric properties and potentially high strengths. Very high cross-link densities can cause materials to become very rigid or glassy, such as phenol-formaldehyde materials.[1]

Formation of cross-links

Cross-links can be formed by chemical reactions that are initiated by heat, pressure, change in pH, or radiation. For example, mixing of an unpolymerized or partially polymerized resin with specific chemicals called crosslinking reagents results in a chemical reaction that forms cross-links. Cross-linking can also be induced in materials that are normally thermoplastic through exposure to a radiation source, such as electron beam exposure[citation needed], gamma-radiation, or UV light. For example, electron beam processing is used to cross-link the C type of cross-linked polyethylene. Other types of cross-linked polyethylene are made by addition of peroxide during extruding (type A) or by addition of a cross-linking agent (e.g. vinylsilane) and a catalyst during extruding and then performing a post-extrusion curing.

The chemical process of vulcanization is a type of cross-linking and it changes the property of rubber to the hard, durable material we associate with car and bike tires. This process is often called sulfur curing, and the term vulcanization comes from Vulcan, the Roman god of fire. However, this is a slow process taking around 8 hours. A typical car tire is cured for 15 minutes at 150°C. However, the time can be reduced by the addition of accelerators such as 2-benzothiazolethiol or tetramethylthiuram disulfide. Both of these contain a sulfur atom in the molecule that initiates the reaction of the sulfur chains with the rubber. Accelerators increase the rate of cure by catalysing the addition of sulfur chains to the rubber molecules.

Cross-links are the characteristic property of thermosetting plastic materials. In most cases, cross-linking is irreversible, and the resulting thermosetting material will degrade or burn if heated, without melting. Especially in the case of commercially used plastics, once a substance is cross-linked, the product is very hard or impossible to recycle. In some cases, though, if the cross-link bonds are sufficiently different, chemically, from the bonds forming the polymers, the process can be reversed. Permanent wave solutions, for example, break and re-form naturally occurring cross-links (disulfide bonds) between protein chains in hair.

Physical cross-links

Chemical covalent cross-links are stable mechanically and thermally, so once formed are difficult to break. Therefore, cross-linked products like car tires cannot be recycled easily. A class of polymers known as thermoplastic elastomers rely on physical cross-links in their microstructure to achieve stability, and are widely used in non-tire applications, such as snowmobile tracks, and catheters for medical use. They offer a much wider range of properties than conventional cross-linked elastomers because the domains that act as cross-links are reversible, so can be reformed by heat. The stabilising domains may be non-crystalline (as in styrene-butadiene block copolymers) or crystalline as in thermoplastic copolyesters.

Oxidative cross-links

Many polymers undergo oxidative cross-linking, typically when exposed to atmospheric oxygen. In some cases this is undesirable and thus polymerization reactions may involve the use of an antioxidant to slow the formation of oxidative cross-links. In other cases, when formation of cross-links by oxidation is desirable, an oxidizer such as hydrogen peroxide may be used to speed up the process.

The aforementioned process of applying a permanent wave to hair is one example of oxidative cross-linking. In that process the disulfide bonds are reduced, typically using a mercaptan such as ammonium thioglycolate. Following this, the hair is curled and then 'neutralized'. The neutralizer is typically a basic solution of hydrogen peroxide, which causes new disulfide bonds to form under conditions of oxidation, thus permanently fixing the hair into its new configuration.

Crosslinks in the biological sciences

In the biological sciences, crosslinking typically refers to a more specific reaction used to probe molecular interactions. For example, proteins (a type of natural polymer) can be cross-linked together using small-molecule crosslinkers. In biological tissue, crosslinks can be induced as disulfide bonds between collagen fibrils. Compromised collagen in the cornea, a condition known as keratoconus, can be treated with clinical crosslinking.[2]

Crosslinker use in protein study

The interactions or mere proximity of proteins can be studied by the clever use of crosslinking agents. For example, protein A and protein B may be very close to each other in a cell, and a chemical crosslinker[3] could be used to probe the protein–protein interaction between these two proteins by linking them together, disrupting the cell, and looking for the crosslinked proteins.

A variety of crosslinkers are used to analyze subunit structure of proteins, protein interactions and various parameters of protein function by using differing crosslinkers often with diverse spacer arm lengths. Subunit structure is deduced, since crosslinkers bind only surface amino residues in relatively close proximity in the native state. Protein interactions are often too weak or transient to be easily detected, but, by crosslinking, the interactions can be captured and analyzed.

Examples of some common crosslinkers are the imidoester crosslinker dimethyl suberimidate, the N-Hydroxysuccinimide-ester crosslinker BS3 and formaldehyde. Each of these crosslinkers induces nucleophilic attack of the amino group of lysine and subsequent covalent bonding via the crosslinker. The zero-length carbodiimide crosslinker EDC functions by converting carboxyls into amine-reactive isourea intermediates that bind to lysine residues or other available primary amines. SMCC or its water-soluble analog, Sulfo-SMCC, is commonly used to prepare antibody-hapten conjugates for antibody development.

In-vivo crosslinking of protein complexes using photo-reactive amino acid analogs was introduced in 2005 by researchers from the Max Planck Institute[4] In this method, cells are grown with photoreactive diazirine analogs to leucine and methionine, which are incorporated into proteins. Upon exposure to ultraviolet light, the diazirines are activated and bind to interacting proteins that are within a few ångströms of the photo-reactive amino acid analog (UV cross-linking).

Uses for crosslinked polymers

Synthetically crosslinked polymers have many uses, including those in the biological sciences, such as applications in forming polyacrylamide gels for gel electrophoresis. Synthetic rubber used for tires is made by crosslinking rubber through the process of vulcanization. Also most rubber articles are cross-linked to make them more elastic. Hard-shell kayaks are also often manufactured with crosslinked polymers.

Alkyd enamels, the dominant type of commercial oil-based paint, cure by oxidative crosslinking after exposure to air.

See also

References

  1. ^ Influence of Crosslink Density
  2. ^ Wollensak G, Spoerl E, Seiler T. Riboflavin/ultraviolet-a-induced collagen crosslinking for the treatment of keratoconus. Am J Ophthalmol. 2003 May;135(5):620-7.
  3. ^ Crosslinking Reagents Technical Handbook, Pierce Biotechnology, Inc., 2006
  4. ^ Suchanek, Monika; Anna Radzikowska and Christoph Thiele (April 2005). "Photo-leucine and photo-methionine allow identification of protein–protein interactions in living cells". Nature Methods 2 (4): 261–268. doi:10.1038/nmeth752. PMID 15782218. http://www.nature.com/nmeth/journal/v2/n4/abs/nmeth752.html. Retrieved 2008-07-18. 

Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Cross Link — (Norwegian: Tverrsambandet) is a proposed fixed link which would connect Øygarden, northern Askøy, Meland and Radøy in Hordaland, Norway. The road is planned to give better transport within Nordhordland and from there to Askøy and Øygarden.… …   Wikipedia

  • cross-link — n. (Chem., Biochem.) a covalent bond that links two chains of atoms, or two sections of one chain, in a polymeric molecule; the cross link is created by a third bond in a monomer unit in addition to the two bonds forming the polymeric chain; a… …   The Collaborative International Dictionary of English

  • cross-link — v. t. [imp. & p. p. {cross linked}, p. pr. & vb. n. {cross linking}.] (Chem., Biochem.) to create cross links in; of polymeric molecules. [PJC] …   The Collaborative International Dictionary of English

  • cross-link — cross linking, n. cross linkable, adj. n. /kraws lingk , kros /; v. /kraws lingk , kros /, Chem. n. 1. a bond, atom, or group linking the chains of atoms in a polymer, protein, or other complex organic molecule. v.t. 2. to attach by a cross link …   Universalium

  • cross-link — [krôs′liŋk΄] n. a crosswise connecting part; specif., an atom or group connecting parallel chains in a complex molecule vt. to join crosswise …   English World dictionary

  • cross-link — n. (also cross linkage) Chem. a bond between chains of atoms in a polymer etc. * * * I noun a side bond that links two adjacent chains of atoms in a complex molecule • Syn: ↑cross linkage • Derivationally related forms: ↑cross link (for: ↑ …   Useful english dictionary

  • cross-link — A covalent linkage between two polymers or between two different regions of the same polymer. * * * cross link krȯ .sliŋk n a crosswise connecting part (as an atom or group) that connects parallel chains in a complex chemical molecule (as a… …   Medical dictionary

  • cross link — noun a transverse link, especially between chains of atoms in a polymeric molecule. verb (cross link) connect by a series of transverse links. Derivatives cross linkage noun …   English new terms dictionary

  • cross-link — noun Date: 1936 a crosswise connecting part (as an atom or group) that connects parallel chains in a complex chemical molecule (as a polymer) • cross link verb …   New Collegiate Dictionary

  • cross-link — n. [[t]ˈkrɔsˌlɪŋk, ˈkrɒs [/t]] v. [[t] ˈlɪŋk[/t]] n. 1) chem. a bond, atom, or group linking the chains of atoms in a polymer or other complex organic molecule 2) chem. to attach by a cross link • Etymology: 1935–40 …   From formal English to slang


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.