Geodesic dome

Geodesic dome
Spaceship Earth at Epcot, Walt Disney World, a geodesic sphere

A geodesic dome is a spherical or partial-spherical shell structure or lattice shell based on a network of great circles (geodesics) on the surface of a sphere. The geodesics intersect to form triangular elements that have local triangular rigidity and also distribute the stress across the structure. When completed to form a complete sphere, it is a geodesic sphere. A dome is enclosed, unlike open geodesic structures such as playground climbers.

Typically a geodesic dome design begins with an icosahedron inscribed in a hypothetical sphere, tiling each triangular face with smaller triangles, then projecting the vertices of each tile to the sphere. The endpoints of the links of the completed sphere are the projected endpoints on the sphere's surface. If this is done exactly, each sub-triangle edge is a slightly different length, requiring links of many sizes. To minimize this, simplifications are made. The result is a compromise of triangles with their vertices lying approximately on the sphere. The edges of the triangles form approximate geodesic paths over the surface of the dome.

Geodesic designs can be used to form any curved, enclosed space. Standard designs tend to be used because unusual configurations may require complex, expensive custom design of each strut, vertex and panel.

Contents

History

The Montréal Biosphère, formerly the American Pavilion of Expo 67, by R. Buckminster Fuller, on Île Sainte-Hélène, Montreal, Quebec
The Climatron greenhouse at Missouri Botanical Gardens, built in 1960 and designed by Thomas C. Howard of Synergetics, Inc., inspired the domes in the science fiction movie Silent Running.

The first dome that could be called "geodesic" in every respect was designed after World War I by Walther Bauersfeld,[1] chief engineer of the Carl Zeiss optical company, for a planetarium to house his planetarium projector. The dome was patented, constructed by the firm of Dykerhoff and Wydmann on the roof of the Zeiss plant in Jena, Germany, and opened to the public in July 1926.[2] Some 20 years later, R. Buckminster Fuller named the dome "geodesic" from field experiments with artist Kenneth Snelson at Black Mountain College in 1948 and 1949. Snelson and Fuller worked developing what they termed "tensegrity," an engineering principle of continuous tension and discontinuous compression that allowed domes to deploy a lightweight lattice of interlocking icosahedrons that could be skinned with a protective cover. Although Fuller was not the original inventor, he developed the intrinsic mathematics of the dome, thereby allowing popularization of the idea — for which he received U.S. patent 2,682,235 [[2]] 29 June, 1954.[3]

The geodesic dome appealed to Fuller because it was extremely strong for its weight, its "omnitriangulated" surface provided an inherently stable structure, and because a sphere encloses the greatest volume for the least surface area.

However, from a practical perspective, geodesic constructions have some disadvantages. They have a very large number of edges in comparison with more conventional structures which have just a few large flat surfaces. Each of the edges must be prevented from leaking, which can be quite challenging for a geodesic structure. Also, spaces enclosed within curved boundaries tend to be less usable than spaces enclosed within flat boundaries. (Since it would be impractical to produce sofas with every possible curved shape, they are normally constructed along straight lines, and so leave wasted space when placed in a curved space.)

The dome was successfully adopted for specialized uses, such as the 21 Distant Early Warning Line domes built in Canada in 1956,[4] the 1958 Union Tank Car Company dome near Baton Rouge, Louisiana designed by Thomas C. Howard of Synergetics, Inc. and specialty buildings like the Kaiser Aluminum domes (constructed in numerous locations across the US, e.g., Virginia Beach, VA), auditoriums, weather observatories, and storage facilities. The dome was soon breaking records for covered surface, enclosed volume, and construction speed.

Leveraging the geodesic dome's stability, the US Air Force experimented with helicopter-deliverable units.

The dome was introduced to a wider audience as a pavilion for the 1964 World's Fair in New York City designed by Thomas C. Howard of Synergetics, Inc. This dome is now used as an aviary by the Queens Zoo in Flushing Meadows Corona Park after it was redesigned by TC Howard of Synergetics, Inc.

Another dome is from Expo 67 at the Montreal World's Fair, where it was part of the American Pavilion. The structure's covering later burned, but the structure itself still stands and, under the name Biosphère, currently houses an interpretive museum about the Saint Lawrence River.

A dome appeared in the 1967 James Bond film You Only Live Twice, inspiring the production designer of Austin Powers The Spy Who Shagged Me to use a dome for Dr Evil's moon base.[5]

During the 1970s, the Cinesphere dome was built at the Ontario Place amusement park in Toronto, Canada. In 1975, a dome was constructed at the South Pole, where its resistance to snow and wind loads is important.

Methods of construction

Wooden domes have a hole drilled in the width of a strut. A stainless steel band locks the strut's hole to a steel pipe. With this method, the struts may be cut to the exact length needed. Triangles of exterior plywood are then nailed to the struts. The dome is wrapped from the bottom to the top with several stapled layers of tar paper, in order to shed water, and finished with shingles. This type of dome is often called a hub-and-strut dome because of the use of steel hubs to tie the struts together.

Panelized domes are constructed of separately-framed timbers covered in plywood. The three members comprising the triangular frame are often cut at compound angles in order to provide for a flat fitting of the various triangles. Holes are drilled through the members at precise locations and steel bolts then connect the triangles to form the dome. These members are often 2x4's or 2x6's, which allow for more insulation to fit within the triangle. The panelized technique allows the builder to attach the plywood skin to the triangles while safely working on the ground or in a comfortable shop out of the weather. This method does not require expensive steel hubs.

Construction details of a permanently installed tent-type Charter-Sphere dome designed by Synergetics. Inc. non- geodesic.

Temporary greenhouse domes have been constructed by stapling plastic sheeting onto a dome constructed from one-inch square beams. The result is warm, movable by hand in sizes less than 20 feet, and cheap. It should be staked to the ground to prevent it being moved by wind.

Steel-framework domes can be easily constructed of electrical conduit. One flattens the end of a strut and drills bolt holes at the needed length. A single bolt secures a vertex of struts. The nuts are usually set with removable locking compound, or if the dome is portable, have a castle nut with a cotter pin. This is the standard way to construct domes for jungle-gyms.

Concrete and foam plastic domes generally start with a steel framework dome, wrapped with chicken wire and wire screen for reinforcement. The chicken wire and screen is tied to the framework with wire ties. A coat of material is then sprayed or molded onto the frame. Tests should be performed with small squares to achieve the correct consistency of concrete or plastic. Generally, several coats are necessary on the inside and outside. The last step is to saturate concrete or polyester domes with a thin layer of epoxy compound to shed water.

Some concrete domes have been constructed from prefabricated, prestressed, steel-reinforced concrete panels that can be bolted into place. The bolts are within raised receptacles covered with little concrete caps to shed water. The triangles overlap to shed water. The triangles in this method can be molded in forms patterned in sand with wooden patterns, but the concrete triangles are usually so heavy that they must be placed with a crane. This construction is well-suited to domes because there is no place for water to pool on the concrete and leak through. The metal fasteners, joints and internal steel frames remain dry, preventing frost and corrosion damage. The concrete resists sun and weathering. Some form of internal flashing or caulking must be placed over the joints to prevent drafts. The 1963 Cinerama Dome was built from precast concrete hexagons and pentagons.

Long Island Green Dome

Dome homes

Fuller hoped that the geodesic dome would help address the postwar housing crisis. This was consistent with his prior hopes for both versions of the Dymaxion House.

Residential geodesic domes have been less successful than those used for working and/or entertainment, largely because of their complexity and consequent greater construction costs. Fuller himself lived in a geodesic dome in Carbondale, Illinois, at the corner of Forest and Cherry.[6] Fuller thought of residential domes as air-deliverable products manufactured by an aerospace-like industry. Fuller's own dome home still exists, the R. Buckminster Fuller and Anne Hewlett Dome Home, and a group called RBF Dome NFP is attempting to restore the dome and have it registered as a National Historic Landmark.

In 1986 a patent for a dome construction technique involving EPS triangles laminated to reinforced concrete on the outside, and wallboard on the inside was awarded to American Ingenuity of Rockledge Florida. The construction technique allows the domes to be prefabricated in kit form and erected by a homeowner. This method makes the seams into the strongest part of the structure, where the seams and especially the hubs in most wooden-framed domes are the weakest point in the structure. It also has the advantage of being watertight.

Disadvantages of dome homes

Many of the disadvantages described below do no longer apply due to new materials and modern construction techniques.

As a housing system, enjoying a wave of popularity in the late 1960s and early 1970s, the dome can have numerous disadvantages and problems. Former proponent for, and author about, dome homes Lloyd Kahn is the founder of Shelter Publications. He has collected a lot of the criticisms and listed them on his company's Web site:

The shape of a dome house makes it difficult to conform to code requirements for placement of sewer vents and chimneys. Off-the-shelf building materials (e.g., plywood, strand board) normally come in rectangular shapes and so much material may have to be scrapped after cutting rectangles down to triangles, thus increasing the cost of construction. Fire escapes are problematic; codes require them for larger structures, and they are expensive. Windows conforming to code can cost anywhere from 5 to 15 times as much as windows in conventional houses. Professional electrical wiring costs more because of increased labor time. Even owner-wired situations are costly, because more of certain materials are required for dome construction.

Air stratification and moisture distribution within a dome are unusual, and these conditions tend to quickly degrade wooden framing or interior paneling. Privacy is difficult to guarantee because a dome is difficult to partition satisfactorily. Sounds, smells, and even reflected light tend to be conveyed through the entire structure.

As with any curved shape, the dome produces wall areas that can be difficult to use and leaves some peripheral floor area with restricted use due to lack of headroom. Circular plan shapes lack the simple modularity provided by rectangles. Furnishers and fitters usually design with flat surfaces in mind, and so placing a standard sofa (for example) results in a crescent behind the sofa being wasted. This is best overcome by purpose-built fittings, though it adds to cost.

Dome builders using cut-board sheathing materials (as was common in the 1960s and 1970s) find it hard to seal domes against rain, because of their many seams. Also, these seams may be stressed because ordinary solar heat flexes the entire structure each day as the sun moves across the sky.

The most effective waterproofing method with a wooden dome is to shingle the dome, but even this can be a problem at the top of the dome, where the slope is less than that required by most roofing materials. (One solution is to add a peaked cap to the top of the dome or to modify the dome shape.) One-piece reinforced concrete or plastic domes are also in use, and some domes have been constructed from plastic or waxed cardboard triangles that are overlapped in such a way as to shed water. Buckminster Fuller's former student J. Baldwin insists that there is no reason for a properly designed, well-constructed dome to leak, and that some designs cannot leak (Bucky Works: Buckminster Fuller's Ideas for Today). However, Lloyd Kahn, after writing two books on the subject (Domebook 1 and Domebook 2), became disillusioned with domes. He calls domes "smart but not wise",[7] and has collected many of the criticisms given above.

Chord factors

Géode V 3 1.gif Géode V 3 1 duale.gif
A geodesic sphere and its dual.

The mathematical object "chord" of the "geodesic sphere" corresponds to the structural "strut" of the physical "geodesic dome". A chord is a (straight) line segment joining two points on a curve. For simple geodesic domes, curves follow the surface of a sphere circumscribing a regular polyhedron with triangular faces, (tetrahedron, icosahedron, or octahedron). The desired frequency of the subsequent geodesic sphere or dome is the number of parts or segments into which a side (edge) of the underlying polyhedral triangle is subdivided. The frequency has historically been denoted by the Greek letter "ν" (nu). By connecting like points along the subdivided sides, a natural triangular grid is formed on each face of the polyhedron. Each segment of the grid is then projected as a "chord" onto the surface of the circumscribing sphere. The technical definition of a chord factor is the ratio of chord length to the radius of the circumscribing sphere. It is therefore convenient to think of the circumscribing sphere as scaled to radius = 1 in which "chord factors" are the same as "chord lengths", (fractional values less than one).

For geodesic spheres, a well-known formula for calculating any "chord factor" η is:

\eta = 2 \sin \left(\frac{\theta}{2} \right)

where "θ" is the corresponding angle of arc for the given chord, that is, the "central angle" spanned by the chord with respect to the center of the circumscribing sphere. Determining the central angle usually requires some non-trivial spherical geometry.

In Geodesic Math and How to Use It Hugh Kenner writes, "Tables of chord factors, containing as they do the essential design information for spherical systems, were for many years guarded like military secrets. As late as 1966, some 3ν icosa figures from Popular Science Monthly were all anyone outside the circle of Fuller licensees had to go on." (page 57, 1976 edition). Other tables became available with publication of Lloyd Kahn's Domebook 1 (1970) and Domebook 2 (1971). With advent of personal computers, the mathematics became more solvable. Rick Bono's Dome software outputs a script that can be used with the POV-ray raytrace to produce 3D pictures of domes. Domes based on the frameworks of different underlying polyhedra along with various methods for subdividing them will produce quite different results. Mathematical formulas developed by Peter W. Messer for calculating chord factors and dihedral angles for the general geodesic sphere appear in the Appendix of the 1999 Dover edition of Spherical Models[dead link] by Magnus J. Wenninger.

Related patterns

Similar geodesic structures may be based upon the pattern of edges and vertices of certain platonic solids, or upon various expansions of these called Johnson solids. Such structures may be composed of struts of uniform length while having faces other than triangles such as pentagons or squares, or these faces may be subdivided by struts of other than the basic length. Plans and licenses for such structures derived from licenses of the Fuller patents were produced during the 1970s by Zomeworks (now a manufacturer of solar trackers). Both geodesic and non-geodesic structures can be derived similarly from the archimedean solids and catalan solids.

The building of strong stable structures out of patterns of reinforcing triangles is most commonly seen in tent design. It has been applied in the abstract in other industrial design, but even in management science and deliberative structures as a conceptual metaphor, especially in the work of Stafford Beer, whose transmigration method is based so specifically on dome design that only fixed numbers of people can take part in the process at each deliberation stages.

Largest geodesic dome structures

Many geodesic domes built are still in use. According to the Buckminster Fuller Institute,[8] the world's ten largest domes are[clarification needed]:

See also

  • (sugam)

References

Notes
  1. ^ First Geodesic Dome: Planetarium in Jena 1922 incl. patent information
  2. ^ according to http://www.planetarium-jena.de/Geschichte.43.0.html
  3. ^ For a more detailed historical account, see the chapter "Geodesics, Domes, and Spacetime" in Tony Rothman's book Science à la Mode, Princeton University Press, 1989.
  4. ^ "Audio interview with Bernard Kirschenbaum on DEW Line domes". Bernardkirschenbaum.com. http://www.bernardkirschenbaum.com/Bernard_Kirschenbaum/audio.html. Retrieved 2010-10-17. 
  5. ^ Austin Powers: The Spy Who Shagged Me - The World of Austin Powers
  6. ^ "Carbondale, Illinois,Forest and Cherry - Google Maps". Maps.google.com. 1970-01-01. http://maps.google.com/maps?f=q&source=s_q&hl=en&geocode=&q=Carbondale,+Illinois,Forest+and+Cherry&sll=37.727097,-89.218617&sspn=0.157225,0.304871&g=Carbondale,+Illinois,&ie=UTF8&ll=37.722885,-89.225507&spn=0.002355,0.004764&t=h&z=18&iwloc=A&layer=c&cbll=37.722766,-89.22551&panoid=AaNkKvIMPGlPFAOFvTFv6w&cbp=12,26.827702702702687,,0,-2.813555743243249. Retrieved 2010-10-17. 
  7. ^ ""Refried Domes" by Lloyd Kahn". Shelterpub.com. http://www.shelterpub.com/_shelter/refried_domes.html. Retrieved 2010-10-17. 
  8. ^ "World's 10 Largest Domes". Buckminster Fuller Institute. http://bfi.org/our_programs/who_is_buckminster_fuller/design_science/geodesic_domes/worlds_10_largest_domes. [dead link]
  9. ^ a b [1][dead link]
  10. ^ "Superior Dome | Wildcat Athletics at Northern Michigan University". Webb.nmu.edu. http://webb.nmu.edu/SportsAthletics/SiteSections/Facilities/SuperiorDome.shtml. Retrieved 2010-10-17. 
  11. ^ WWSI. "Western Wood Structures, Inc. - Glulam Beams, Arches and Bridges". Westernwoodstructures.com. http://www.westernwoodstructures.com/. Retrieved 2010-10-17. 

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • geodesic dome — ge o*des ic dome, n. A domelike structure invented by R. Buckminster Fuller, in which straight structural parts are connected to form interlocking polygons, affording great strength and rigidity combined with light weight. The typical form has… …   The Collaborative International Dictionary of English

  • geodesic dome — noun a lightweight dome constructed of interlocking polygons; invented by R. Buckminster Fuller • Hypernyms: ↑dome * * * ˌgeoˌdesic ˈdome 7 [geodesic dome] noun (architec …   Useful english dictionary

  • geodesic dome — UK [ˌdʒiːəʊˌdiːsɪk ˈdəʊm] / US [ˌdʒɪoʊˌdesɪk ˈdoʊm] noun [countable] Word forms geodesic dome : singular geodesic dome plural geodesic domes a building with a high round frame made of shapes with angles that fit together …   English dictionary

  • geodesic dome — a light, domelike structure developed by R. Buckminster Fuller to combine the properties of the tetrahedron and the sphere and consisting essentially of a grid of compression or tension members lying upon or parallel to great circles running in… …   Universalium

  • geodesic dome — /dʒioʊˌdɛsɪk ˈdoʊm/ (say jeeoh.desik dohm) noun a dome constructed from a latticework of polygons whose sides are parts of geodesic lines so that the pressure load is shared evenly throughout the structure, having the advantage that the larger… …  

  • Geodesic Dome — Eine Geodätische Kuppel, die Biosphère, Ile Ste Hélène, Montreal Geodätische Kuppeln sind Konstruktionen von sphärischen Kuppeln mit einer Substruktur aus Dreiecken. Inhaltsverzeichnis 1 Geschichtliches 2 …   Deutsch Wikipedia

  • GEODESIC DOME —    See DOME …   Historical Dictionary of Architecture

  • geodesic dome — ge|o|des|ic dome [ ,dʒiou,desık doum ] noun count a building with a high round frame made of shapes with angles that fit together …   Usage of the words and phrases in modern English

  • geodesic dome — ge′odes′ic dome′ n. archit. a light domelike structure developed by R. Buckminster Fuller, consisting of a framework of straight members, usu. in tension, typically having the form of a projection upon a sphere of a grid of triangular or… …   From formal English to slang

  • geodesic dome — noun A domed structure of lightweight straight elements forming interlocking polygons …   Wiktionary

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”